Featured | Materials | Encapsulants | Epoxy | Nov 05, 2019

Epoxy Features Very Low Coefficient of Thermal Expansion

Epoxy Features Very Low Coefficient of Thermal Expansion Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Read more »

Featured | Manufacturing | Electromechanics | Connectors | Nov 04, 2019

New BJB LED Connector for Linear LED Modules: Book 21 Compliant

New BJB LED Connector for Linear LED Modules: Book 21 Compliant Lampholders were standard in older, traditional lighting systems. Modern LED fixtures that utilize non-replaceable LEDs create several assembly and field-replacement disadvantages. Zhaga Book 21 addresses these shortcomings by standardizing linear 'socketable' LED modules. In accordance with Book 21, BJB has developed the new LED connector 47.303; a two-part fixing and electrical connection system, which enables LED modules to be installed and subsequently replaced as easily as conventional light sources. Incorporating the BJB 47.303 series results in reduced assembly costs and dramatically faster retrofit or replacement times. Read more »

Featured | LEDs | AC LEDs | White LEDs | Indoor Applications | Automotive | Outdoor Applications | Nov 04, 2019

EzyLED™ Now Stocked at Digi-Key

EzyLED™ Now Stocked at Digi-Key American Bright, a global LED lighting solutions manufacturer, announced a series of EzyLED 3030. American Bright's EzyLED™ is a proprietary LED device with a built-in IC. This patented design drastically reduces the need for additional circuitry and other on-board components making it the ideal solution for tight fitting applications. The smart EzyLED 3030 comes with a constant current regulator with built-in bias voltage rectification circuit and uses conventional 12V/24V AC/DC sources. The EzyLED is also available in a T-10 bulb. Request a free sample today! Read more »

Featured | LEDs | Multi-Color LEDs | Architectural Lighting | Displays | Nov 01, 2019

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED These SMD LEDs are packaged in an industry standard PLCC8 package. These high performance 4 color SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for signage applications. Read more »

Featured | LEDs | IR-LEDs | Sensors | Health | Nov 01, 2019

Measuring the Oxygen Content of Blood with LEDs

Measuring the Oxygen Content of Blood with LEDs Pulse oximetry is a non-invasive method for determining haemoglobin (Hb) saturation through oxygen in the blood and heart frequency. It uses the fact that oxygen-rich and oxygen-poor haemoglobin absorb red and infrared light differently. In order to measure the oxygen content reliably, LEDs with high performance, constant quality and low scattering are needed as light sources. With the WL-SMTW and WL-SITW series, Würth Elektronik has suitable red and infrared LEDs in its portfolio. In addition, there is a matching light sensor available: The phototransistor WL-STTW can reliably detect both red and infrared light. Read more »

Featured | Systems & Applications | Tracks | Indoor Applications | Oct 07, 2019

Multisystem – Same Core, Multiple Shapes and Functionalities for Track Lighting

Multisystem – Same Core, Multiple Shapes and Functionalities for Track Lighting A.A.G. Stucchi low voltage system for track lighting is developed to satisfy all technical and design needs. The all system is based on a "smart core" that provides easy and magnetic installation of the lighting fixtures, and integrated databus for light control, thus being technically at the cutting edge. The various available versions of the track provide solutions for ceiling, suspended and trimless applications while the all range of connections, end-feeds and adapters allow maximum flexibility for projects where light runs along walls, ceilings, or a combination of both. Read more »

Featured | LEDs | White LEDs | White Mid Power LEDs | Oct 01, 2019

Cree® J Series™ 2835 LEDs

Cree® J Series™ 2835 LEDs J Series™ LEDs extend Cree's industry leading portfolio of lighting class LEDs to a broader set of applications. The J Series 2835 LEDs combine high efficacy and excellent value in a reliable package. The J Series 2835 Standard LEDs are optimized for low density lighting applications where high efficacy and smooth appearance are critical, such as downlights, troffers, and panel lights. The J Series 2835 Fidelity LEDs offer high CRI and are optimized for lighting applications where good color quality is critical. Read more »

Featured | Components | LEDs | White Mid Power LEDs | Tunable White Light | Human Centric Lighting | Sep 19, 2019

Nichia Launches World's First 2-in-1 Tunable White, Single LES, Mid-Power 3030 LED

Nichia Launches World's First 2-in-1 Tunable White, Single LES, Mid-Power 3030 LED Nichia, the leader in and inventor of the high-brightness LED, announces its game-changing 2-in-1 tunable white LED. This is the industry's first tunable white LED in a mid-power 3030 package with a single light emitting surface (LES). Targeting most lighting applications, the technology provides luminaire manufacturers with a host of benefits ranging from new technology and design features to improved factory operations and inventory positions. Read more »

Featured | Components | LEDs | Multi-Color LEDs | Outdoor Applications | Sep 15, 2019

Lumileds RGBW Module Achieves Breakthrough Flux and Color Control

Lumileds RGBW Module Achieves Breakthrough Flux and Color Control Lumileds, a global leader in innovative lighting solutions, today introduced the Luxeon MultiColor Module 2.5 W, a compact RGBW module that produces leading flux and achieves exact color points in architectural and general outdoor lighting applications. The 4-in-1 module simplifies system design by combining red, green, blue and white emitters in a compact 5050 footprint, PLCC package. "We designed a barrier between the color and white emitter to eliminate the problem of crosstalk, allowing designers to consistently achieve the exact color point they are targeting," said Jennifer Holland, Product Line Director at Lumileds. Crosstalk can occur when a direct LED excites the phosphor in a neighboring white LED, altering the emitted color. Read more »

Featured | LED Modules | Flexible Modules | RGB Tape | IP-Protection | Sep 15, 2019

American Bright introduces Smart RGB Addressable Rope Light Solutions

American Bright introduces Smart RGB Addressable Rope Light Solutions American Bright brings to the market their smart RGB+IC LED flexible rope lighting solutions allowing for boundless application opportunities. The smart LED light source includes the controller and RGB chip in one package allowing for each LED to be addressable. Additional adaptability is gained with waterproof coating options of IP20, IP65 and IP67. Read more »

Featured | Tools | Measurement | Goniophotometers | Goniospectrometer | Sep 02, 2019

Goniometer LGS 650: Higher Accuracy and Reproducibility

Goniometer LGS 650: Higher Accuracy and Reproducibility Goniophotometry is an absolute measuring procedure that can achieve a higher level of accuracy than sphere photometry. It does not require a luminous flux standard, but in contrast is often used for calibrating standard lamps for luminous flux. In addition to the luminous flux, photometric spatial radiation properties, so-called luminous intensity distribution curves and the colorimetric distribution of radiation emitted from a light source can be determined. Partial luminous flux, i.e. the photometric radiant flux in a limited solid angle range, can also be measured for e.g. the evaluation of the energy efficiency class of a test sample. Read more »

Featured | LEDs | White LEDs | CoB LEDs | Sep 01, 2019

Cree® XLamp® High Current LED

Cree® XLamp® High Current LED The XLamp High Current LED Array family is optimized for best-in-class lumen output, efficacy and reliability at high drive currents. XLamp CMA LEDs share the same package design and LES sizes as Cree's industry-leading CXA2 Standard Density LEDs, enabling lighting manufacturers to address a range of performance requirements for applications such as track, downlight and outdoor lighting using a single easy-to-use platform. Read more »

Featured | Components | LEDs | Multi-Color LEDs | Outdoor Applications | Sep 01, 2019

Lumileds RGBW Module Achieves Breakthrough Flux and Color Control

Lumileds RGBW Module Achieves Breakthrough Flux and Color Control Lumileds, a global leader in innovative lighting solutions, today introduced the Luxeon MultiColor Module 2.5 W, a compact RGBW module that produces leading flux and achieves exact color points in architectural and general outdoor lighting applications. The 4-in-1 module simplifies system design by combining red, green, blue and white emitters in a compact 5050 footprint, PLCC package. "We designed a barrier between the color and white emitter to eliminate the problem of crosstalk, allowing designers to consistently achieve the exact color point they are targeting," said Jennifer Holland, Product Line Director at Lumileds. Crosstalk can occur when a direct LED excites the phosphor in a neighboring white LED, altering the emitted color. Read more »

Featured | Business | Company News | Branding | UV-LEDs | IR-LEDs | Aug 12, 2019

Nationstar Overall Layout in UV LED Market

Nationstar Overall Layout in UV LED Market In August 2018, Nationstar set up the Non-visual Light Source Business Division, focusing on IR LED, UV LED, animal and plant lighting. Nationstar has been fully laid out on UVA/UVB/UVC. Since 2016, Nationstar has launched near-ultraviolet LED, deep-ultraviolet LED and modules, with wide wavelength range, high reliability and good feedback in the market. At present, we have established partnerships with many well-known manufacturers. Read more »

Featured | LEDs | White LEDs | Art & Museum Lighting | Aug 05, 2019

More Museums Install Pioneering UV-Free LED Technology

More Museums Install Pioneering UV-Free  LED Technology NICHIA, the leader in high brightness LED technologies, announces continued success with Optisolis – the world's first series of packaged LEDs and Chip-on-Board (COB) solutions that accurately mimics natural sunlight without producing any harmful ultraviolet (UV) light. The natural color rendering of Optisolis LEDs lets visitors experience artwork as the artist intended without degrading the work Read more »

FEATURED

Epoxy Features Very Low Coefficient of Thermal Expansion

Epoxy Features Very Low Coefficient of Thermal Expansion Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Read more »

FEATURED

New BJB LED Connector for Linear LED Modules: Book 21 Compliant

New BJB LED Connector for Linear LED Modules: Book 21 Compliant Lampholders were standard in older, traditional lighting systems. Modern LED fixtures that utilize non-replaceable LEDs create several assembly and field-replacement disadvantages. Zhaga Book 21 addresses these shortcomings by standardizing linear 'socketable' LED modules. In accordance with Book ... Read more »

FEATURED

EzyLED™ Now Stocked at Digi-Key

EzyLED™ Now Stocked at Digi-Key American Bright, a global LED lighting solutions manufacturer, announced a series of EzyLED 3030. American Bright's EzyLED™ is a proprietary LED device with a built-in IC. This patented design drastically reduces the need for additional circuitry and other on-board components making it the ideal ... Read more »

FEATURED

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED These SMD LEDs are packaged in an industry standard PLCC8 package. These high performance 4 color SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for signage applications. Read more »

FEATURED

Measuring the Oxygen Content of Blood with LEDs

Measuring the Oxygen Content of Blood with LEDs Pulse oximetry is a non-invasive method for determining haemoglobin (Hb) saturation through oxygen in the blood and heart frequency. It uses the fact that oxygen-rich and oxygen-poor haemoglobin absorb red and infrared light differently. In order to measure the oxygen content reliably, LEDs with ... Read more »

EDITORIAL

LpS/TiL 2019 - Europe's Foremost Lighting Conference Discussed Latest Lighting Trends

LpS/TiL 2019 - Europe's Foremost Lighting Conference Discussed Latest Lighting Trends Last week saw the co-hosted LED professional Symposium +Expo (LpS), Trends in Lighting Forum &Show (TiL) and for the first time the Digital Addressable Lighting Interface (DALI) Summit return to Bregenz, Austria. The three international conference and exhibition events were carefully curated to ... Read more »

EDITORIAL

The 2019 LpS & TiL Award Winners: Celebrating the Complete Spectrum of Light

The 2019 LpS & TiL Award Winners: Celebrating the Complete Spectrum of Light It is a great pleasure for the LpS and TiL organization committee to announce the award winners for 2019. For the second time in a row, after the traditional cruise on the lake from Bregenz to Lindau, the gala dinner at the Eilgut Halle has proven to being a great place for the LpS & TiL award ... Read more »

page_peel