Connected Lighting | Featured | Driver Modules | Electronics | Components | Feb 08, 2018

GRE Alpha Introduces ENO-DIM EnOcean Wireless Dimming Module

GRE Alpha announced the release of its cutting-edge ENO-DIM dimming module with integrated EnOcean technology. The spring-loaded terminal simplifies installation and is compatible with any EnOcean-enabled wireless switch. With the ready to install dimming module, it's just plug and play. The ENO-DIM is available in three regional frequency versions: 902 MHz in North America, 928 MHz in Japan, and 868 MHz in Europe and China.

The single-channel ENO-DIM module hooks up to any constant voltage LED driver, including an existing DC power distribution panel or at any point in an existing lighting circuit. The ENO-DIM module operates at a maximum 5 Amp capacity and can support up to 30 EnOcean wireless energy-harvesting devices. The module adheres to UL8750 standards and is IP20-rated.

This dimming module makes it possible to easily retrofit existing wired lighting control systems with simple to install EnOcean-enabled wireless switches. These switches utilize the energy created by the touch of a button to send a wireless signal to the ENO-DIM module. There are no batteries or wires required, and switches can be mounted anywhere.

ENO-DIM applications include architectural lighting, effect and contour lighting, general commercial illumination, warehouses, signage, strip lighting and more. The ENO-DIM dimming module is one of the most innovative products in the industry. By combining GRE Alpha’s dimming technology with EnOcean's self-powered sensors and switches, GRE Alpha is paving the way for industrial lighting systems that are sustainable and energy-efficient.

For additional information on the ENO-DIM dimming module, please visit https://grealpha.com/products/led-dimming-modules/enocean-dimming-modules/enocean-dimming-modules/
For general information, please visit www.grealpha.com

About GRE Alpha:

GRE Alpha® Electronics, Ltd. specializes in the design and manufacture of solid-state lighting power supplies and lighting control accessories which are the lifeblood of indoor and outdoor LED lighting systems. With more than two decades of power conversion expertise and a commitmenttoinnovation, GRE Alpha engages with industry pioneers to deliver highly efficient, installation-ready and agency-approved LED power conversion products for a wide variety ofindustry applications.

FEATURED

Nationstar's UV LED - a Pioneer in the DUV Sterilization Industry

Nationstar's UV LED - a Pioneer in the DUV Sterilization Industry Since 2016, NATIONSTAR has launched near-ultraviolet LED, deep-ultraviolet LED and modules, with wide wavelength range, high reliability and good feedback in the market. At present, we have established partnerships with many well-known manufacturers. Read more »

FEATURED

Industry Leading LUXEON 5050 LED Gets Performance Boost

Industry Leading LUXEON 5050 LED Gets Performance Boost Streetlights and high-bay fixtures require high flux and efficacy to meet the ever-increasing demands for system efficiency and energy cost reduction for these applications. Today, LUXEON 5050 LEDs received an upgrade in both flux and efficacy. Typical performance is now 675 lm with 172 lm/W in ... Read more »

FEATURED

Cree® XLamp® XM-L3 LEDs – More Output & Reliability

Cree® XLamp® XM-L3 LEDs – More Output & Reliability The XLamp® XM-L3 LED delivers a massive 55% upgrade in maximum light output over the XM L2 LED, providing a single-die LED point source for precise optical control. The XM-L3 LED shares the same mechanical and optical footprint as the original XM-L® and XM-L2 LEDs, providing a seamless upgrade path ... Read more »