Components | LEDs | UV-LEDs | Special Applications | Jun 24, 2019

Violumas improved output for their UVA 320– 410nm LEDs

Violumas improved output for their UVA 320– 410nm LEDs Violumas recently announced a 30% increase in optical output for all UVA SMDs. This increase can be attributed to their "Index Match" technology. The standard product line has a default radiant angle of 60°, and custom optics can be fitted for angles of 30°, 60°, 90°, 120°, and flat. Violumas first revealed its surface-mount-device (SMD) product lineup with a focus on thermal dissipation at RadTech 2018 in Chicago, Illinois. Read more »

Components | LEDs | UV-LEDs | UV-Modules | Horticulture | May 21, 2019

SETi and Seoul Viosys - Advanced UV LED Technology for Horticultural Applications

SETi and Seoul Viosys - Advanced UV LED Technology for Horticultural Applications Sensor Electronics Technology, Inc, (SETi), a division of Seoul Semiconductor and Seoul Viosys are showcasing the LED industry's first product line encompassing the entire UV spectrum from 225nm to 405nm, developed for a range of applications, including horticultural lighting to enhance plant growth cycles and control diseases at LIGHTFAIR International 2019, at the Philadelphia Convention Center in Philadelphia, PA. Read more »

Components | LEDs | UV-LEDs | Special Applications | Disinfection | Medical | Apr 26, 2019

Nichia Launches a 280nm Deep UV LED

Nichia Launches a 280nm Deep UV LED Nichia Corporation is proud to introduce a new Deep UV LED, Part Number NCSU334A. Nichia has already had significant success over the years with UVA LEDs, specifically in convention resin curing applications. Nichia's new 280 nm UVC NCSU334A will be able to address mass market goals for water purification and air sterilization using Solid-State Lighting. With its small size (6.8x6.8 mm) and strong performance (55 mW typical optical power at 350 mA), the NCSU334A allows for system miniaturization and long-life solutions where previous technologies could not. Read more »

Components | LEDs | IR-LEDs | Special Applications | Apr 25, 2019

Luminus Adds Eleven High-Intensity IR LEDs

Luminus Adds Eleven High-Intensity IR LEDs Luminus Devices has significantly expanded its portfolio of high-power infrared (IR) LEDs with eleven emitters designed to address the rapid expansion of automotive, consumer, machine vision, medical, and security applications. The Luminus IR SST LEDs are now offered in three wavelengths – 810nm, 850nm, and 940nm – and six beam angle options ranging from 40° to 130°. The high radiometric power output and low thermal resistance allow system designers to reduce the number of emitters and overall footprint for a broad range of infrared applications. Read more »

Components | LEDs | IR-LEDs | Special Applications | Surveillance | Health | Apr 11, 2019

Lumileds Tailors Luxeon IR Family for Cost Conscious High Power Applications

Lumileds Tailors Luxeon IR Family for Cost Conscious High Power Applications Lumileds introduced the Luxeon IR 2720 Line, high power emitters that set the standard for abundant radiant power delivered in an industry standard package for seamless integration in existing designs. The emitters provide high radiant power of up to 1,300 mW at 940 nm or 1,250 mW at 850 nm wavelength and feature high efficacy and a popular 120° beam angle. The 2.75x2.0 mm LEDs are undomed and especially useful for applications with package height limitations that prevent the use of domed solutions. The emitters address a wide array of cost conscious infrared applications from surveillance and machine vision to iris scanning and health monitors. Read more »

Components | LEDs | UV-LEDs | Special Applications | Medical | Feb 20, 2019

New Mid-Power Ultraviolet Emitting Diode With Quartz Window from Vishay

New Mid-Power Ultraviolet Emitting Diode With Quartz Window from Vishay Vishay Intertechnology, Inc. introduced a ceramic mid power ultraviolet (UVC) emitting diode for sterilization, sanitation, and purification applications. Featuring a quartz window, the Vishay Semiconductors VLMU35CM00-280-120 delivers an extremely long lifetime in a compact 3.5 mm by 3.5 mm by 1.2 mm surface-mount package. Read more »

Components | LEDs | IR-LEDs | Special Applications | Sep 05, 2018

DOWA Announces Short-Wavelength IR LEDs with the World’s Highest Output Power

DOWA Announces Short-Wavelength IR LEDs with the World’s Highest Output Power DOWA Electronics Materials Co., Ltd., a subsidiary of DOWA Holdings Co., Ltd. , has successfully developed short-wavelength-infrared LED chips with output power that is 3.5 times higher than existing products and is the highest in the world at 6.8 mW [1], with a peak wavelength of 1,300 nm. DOWA has started to deliver sample products. Read more »

Components | LEDs | IR-LEDs | Special Applications | Industrial | Aug 24, 2018

TT Electronics' Compact, Surface-Mount IR LED Emitter has Narrow FWH Angle

TT Electronics' Compact, Surface-Mount IR LED Emitter has Narrow FWH Angle TT Electronics, a global provider of engineered electronics for performance critical applications, has introduced a compact, infrared LED emitter with the industry’s largest spot diameter of 7 mm for super-reliable optical sensing and position encoder applications. Read more »

Components | LEDs | UV-LEDs | Purple LEDs | Disinfection | Special Applications | Aug 20, 2018

LG Innotek Introduces "Visible Disinfection Lighting" Solution

LG Innotek Introduces "Visible Disinfection Lighting" Solution LG Innotek today announced "Visible Disinfection Lighting", which is a functional light source that gives the effect of sterilization by sunlight with the indoor light. The LED realizes the effect of eco-friendly sterilization, that is, the method used to dry household goods and blankets under the sun, in indoor spaces conveniently and safely at any time. Read more »

Components | LEDs | IR-LEDs | CCTV Survillance Cameras | Special Applications | Jul 19, 2018

New IR LED for Razor Sharp Images of CCTV Survillance Cameras

New IR LED for Razor Sharp Images of CCTV Survillance Cameras Osram Opto Semiconductors is expanding its proven Oslon Black portfolio for infrared illumination with the addition of an infrared LED with a narrower beam angle of ± 25°. Thanks to the new SFH 4718A IRED, illumination units for camera systems with a medium capture range no longer require secondary optics. The Oslon Black family now offers a wide selection for the most varied of infrared-based applications, taking in four power classes, three wavelengths and three beam angles. Read more »

Components | LEDs | UV-LEDs | Disinfection | Medical | Special Applications | Jun 05, 2018

Luminus Enters UV-C LED Disinfection and Sterilization Segment with Two 280 nm Emitters

Luminus Enters UV-C LED Disinfection and Sterilization Segment with Two 280 nm Emitters Luminus Devices, Inc., has expanded its ultraviolet (UV) LED portfolio with two new 280 nm devices intended for the medical and health and well-being product segments. The standard footprint 3535 surface mount emitter is a 350 mA device with peak output up to 60 mW. The second ultra-compact emitter is 1.3 mm by 1.3 mm and only 0.85 mm tall; it delivers 3 mW at 20 mA and peak output of 11 mW at 100 mA. Read more »

Components | LEDs | IR-LEDs | Automotive | Apr 11, 2018

Osram Adds Six New High-Power Infrared LEDs to Its Oslon Black Family

Osram Adds Six New High-Power Infrared LEDs to Its Oslon Black Family Osram Opto Semiconductors is expanding its Oslon Black family for the infrared range with six new automotive IREDs. The 850 nm versions are intended for exterior applications such as night vision, pedestrian protection, pre-field recognition and lane detection. The new 940 nm versions are suitable above all for interior automotive applications such as driver monitoring, seat occupancy detection and gesture recognition. Thanks to different wavelengths and lenses these products cover a wide range of customer requirements and can be operated at up to 5 A in pulsed mode. Read more »

Components | LED Modules | UV-Modules | Special Applications | Feb 26, 2018

LG Innotek Introduces UV LED Module with Perfect Waterproof

LG Innotek Introduces UV LED Module with Perfect Waterproof LG Innotek today announced that it has supplied UV LED module for water purifiers to the famous Japanese purifier manufacturer for the past year and achieved the perfect quality of zero defect rate. The Japanese market is known to have very strict quality standards, but it has proved its great performance and quality by supplying about 50,000 modules without a single defect. Read more »

Discussions | Components | UV-LEDs | Jan 31, 2018

New Klaran® WD Series Breaks the $0.25/mW Price Barrier for UVC LEDs

New Klaran® WD Series Breaks the $0.25/mW Price Barrier for UVC LEDs Crystal IS, a leader in developing high performance UVC LEDs, today announced the expansion of its Klaran® platform with the release of the WD series LEDs. Developed specifically for the price and performance needs of POU water disinfection, Klaran WD Series marks the first instance a UVC LED manufacturer has demonstrated the ability to break the $0.25/mW price barrier required for mass production of UVC LED based water purification products. The company will initially offer 30 mW and 40 mW variants with plans to introduce more powerful devices in the coming months. Read more »

Discussions | Medical | Components | UV-LEDs | Nov 30, 2017

LG Innotek Unveils the World’s First 100 mW UV-C LED

LG Innotek Unveils the World’s First 100 mW UV-C LED LG Innotek today announced that the company has developed the world's first 100 mW UV-C LED. This development is 2 years ahead of the industry forecast that predicted its development would be successful by 2020. Read more »

FEATURED

Light Diffusing Polyurethane LED Potting Compound

Light Diffusing Polyurethane LED Potting Compound UR5635 light diffusing polyurethane LED potting compound is a two-part, semi-rigid polyurethane resin which has been formulated to have a light diffusing effect. Its cloudy appearance offers a unique light diffusion effect which has seen UR5635 used to great success as an LED potting compound for ... Read more »

FEATURED

Epoxy Features Very Low Coefficient of Thermal Expansion

Epoxy Features Very Low Coefficient of Thermal Expansion Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Read more »

page_peel