Resources | White Papers | Test Equipment | Mar 20, 2019

WHITE PAPER - The Calibration Traceability Chain of a Photometric LED Test System

FluxGage is a LED luminaire tester and provides a small and cost-effective solution for testing LED luminaires in 2π geometry. The black measurement surface and the lack of multiple reflections make the system much more predictable and allow using information about the DUT such as size, beam angle and surface reflectivity, to calculate correction factors.

This testing system (FluxGage) is based on a novel combination of photometric detectors and the measurements and calculations within this whitepaper proof the reliability of the measurement device. It opens new ways to easily proof the quality of LED luminaires.

This whitepaper discusses the key considerations of LED test systems:

  • Calibration
  • Calibration uncertainty
  • Uncertainty over working conditions
  • Luminaire size and angle
  • Reflection from the luminaire
  • Experimental verification

_________________________________________________________


WHITE PAPER - DOWNLOAD 
"
The Calibration Traceability Chain of a Photometric LED Test System"

_________________________________________________________
 

Provided by mks | Ophir, Israel
White Paper Sponsor

MKS-Ophir_Stacked copy.jpg

_________________________________________________________

Supported by LED professional (c) 2019
The global information hub for lighting technologies.

FEATURED

Simultaneous Measurement of Several Wavelength Ranges

Simultaneous Measurement of Several Wavelength Ranges Instrument Systems offers smart high-end solutions for complex spectral measurements that are to be made simultaneously over an extremely broad wavelength range, or over several samples. A group of spectroradiometers of the CAS series can be controlled in parallel by a trigger box. Read more »

FEATURED

Multisystem - Same Core, Multiple Shapes and Functionalities for Track Lighting

Multisystem - Same Core, Multiple Shapes and Functionalities for Track Lighting A.A.G. Stucchi low voltage system for track lighting is developed to satisfy all technical and design needs. The all system is based on a “smart core” that provides easy and magnetic installation of the lighting fixtures, and integrated databus for light control, thus being technically at the ... Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel