LpR Article | Technologies | Jul 06, 2016

LED Light Spectrum Enhancement with Transparent Pigmented Glazes

LED Light Spectrum Enhancement with Transparent Pigmented Glazes While LED bulbs have the distinct economic advantages of using less energy, producing less heat and lasting years longer than traditional incandescent bulbs, when objects are viewed under LED light, they frequently appear to be of different colors than when viewed in sunlight or with incandescent lights. Jan-Marie A Spanard from Light Spectrum Glazes proposes and explains an approach to optimize the spectral distribution of LED light to overcome this weakness. Read more »

LpR Article | Technologies | Aug 05, 2016

Reliability Oriented Design of LED-Based Light Sources

Reliability Oriented Design of LED-Based Light Sources The transition from traditional light sources to SSL systems requires a different design philosophy to achieve the advantages offered by LED light sources. The key approach is based on the parallel design of thermal, electrical, optical and spectral properties of the light source. Matteo Meneghini, Gaudenzio Meneghesso, Enrico Zanoni and Matteo Dal Lago from the Department of Information Engineering at the University of Padova, and Nicola Trivellin from LightCube SRL explain this approach including the importance of the electrical management of LEDs, comparing modulation techniques to constant current, differentiating between versatility and efficiency. Read more »

LpR Article | Technologies | Sep 12, 2016

LED and Lens Degradation Through Volatile Organic Compounds

LED and Lens Degradation Through Volatile Organic Compounds In general, LEDs are very resistant light sources. Nevertheless, glues, conformal coatings, o-rings, gaskets, and potting compounds, all materials that are frequently used in the construction of LED based luminaires or lamps and often contain volatile organic compounds (VOCs) may have a negative impact on performance, reliability and lifetime. Edward Steinke, application engineer at Cree, explains the set of problems and how to prevent these issues based on Cree’s products, using their test kit components, as well as components for lamp and luminaire applications. Read more »

LpR Article | Technologies | Oct 07, 2016

MOCVD Platform for Cost-Effective Production of GaN-based HB LEDs

MOCVD Platform for Cost-Effective Production of GaN-based HB LEDs GaN-based blue and ultraviolet light emitting diodes (LEDs) are steadily becoming more widely used in solid-state lighting (SSL) applications [1-3]. Enabling dramatic energy savings when compared to contemporary incandescent bulbs and fluorescent lamps, these high-brightness LEDs (HB-LEDs) have a market potential in the billions of dollars. Yole Development estimates that by 2017, the market for LEDs will be approximately $75 billion [4, 5]. Shiping Guo, the Senior Technology Director of Advanced Micro-Fabrication Equipment Inc. presents a new approach to support this goal with a cost effective MOCVD solution for HB-GaN LED manufacturing. Read more »

LpR Article | Technologies | Oct 17, 2016

High-Index Nanocrystals - Key to Next Generation Advancements in Lighting

High-Index Nanocrystals - Key to Next Generation Advancements in Lighting Solid-State Lighting is destined to be a next generation lighting option. LEDs have already entered main stream applications and OLED technology has advanced greatly in the past few years in terms of efficacy and performance. Both technologies need to continue to improve performance to achieve high market acceptance. Dr. Gregory Cooper, Chief Technology Officer and Founder of Pixelligent Technologies LLC, illustrates how LED and OLED technology can advance to the next level by incorporating nanomaterials into existing packaging. Read more »

SSL | Systems + Applications | Products, Materials + Tools | Components | Luminaires | UV | UV-C | Jun 26, 2020

Signify Invests to Broaden Its UV-C Lighting Portfolio for Professional Disinfection

Signify Invests to Broaden Its UV-C Lighting Portfolio for Professional Disinfection Signify, the world leader in lighting, is increasing its UV-C lighting production capacity and expanding its UV-C product portfolio. The company is leveraging more than 35 years of expertise in UV-C lighting to address the growing global need for the disinfection of air, surfaces and objects. Read more »

Resources | LpR Article | Research | Thermal Management | Measurement | Jul 29, 2020

Temperature Profiling of Secondary LED Optics by Infrared Thermography

Temperature Profiling of Secondary LED Optics by Infrared Thermography Over the last few years, the power density of white LEDs has increased dramatically. Whilst there are large efforts to optimize the thermal management and thus the temperature stability of the LEDs, less attention is paid to the temperature of the secondary optic. Peter W. Nolte, Franziska Steudel, Bernd Ahrens, Nils J. Ziegeler, Frank Drees, Horst Rudolph, and Stefan Schweizer from the Fraunhofer Application Center for Inorganic Phosphors, the South Westphalia University of Applied Sciences, and the Innovations-and Technologycenter GmbH, TRILUX Group respectively, have approached this issue. They investigated the temperature profiles of polymethyl methacrylate (PMMA) and polycarbonate (PC) secondary optics and they discuss the results. Read more »

LpR Article | Aug 19, 2016

Status of Micro- and Nanostructured 3D LED Technologies

Status of Micro- and Nanostructured 3D LED Technologies Conventional LEDs are planar, two-dimensional (2D) devices that emit light from a thin material layer at or near their flat surface. The vast majority of LEDs are made of GaN and InGaN material requiring expensive substrate wafers made of sapphire, silicon carbide or gallium nitride. The 3D WireLED technology uses silicon wafers for wafer diameters of 8 inches or larger. On each wafer, millions of vertical microwires and microrods of GaN are grown, each with a diameter of less than one micron. Mr. Arno Grabher-Meyer and Mr. Siegfried Luger from LED professional, talked with the General Manager of Aledia, Mr. Giorgio Anania about the status of this innovative technology. Read more »

LpR Article | Jul 01, 2016

Light Guide Technology for Obtaining a Different Bi-Directional Direct/Indirect Light Emission Pattern

Light Guide Technology for Obtaining a Different Bi-Directional Direct/Indirect Light Emission Pattern Market requirements ask for a solution for use in suspended light fixtures that will allow the light to be distributed upward, for indirect illumination, as well as downward, for direct illumination. However, existing light guide technology typically produces fairly indirect light and relatively uncontrolled distribution. Brett Shriver, Vice President at Global Lighting Technologies, explains a new approach with individual light extraction features used within the light guide in order to control light in multiple directions and provide the required semi-Lambertian distribution in the downward direction with low glare while obtaining a bat-wing type distribution in the upward direction. Read more »

LpR Article | Jul 04, 2016

Lighting & Building Automation Technologies

Lighting & Building Automation Technologies The transition from traditional lighting technology to LED is old news. People in the lighting business no longer talk about the “LED Revolution”. Today’s revolution, perhaps spurred on by LED technology, is in building automation and lighting controls. Lighting experts know that while LED products have the potential to achieve terawatts of power savings worldwide over the next decade, even larger power savings might be achieved through effective lighting control and building automation systems. Greg Galluccio, Director at Leviton Manufacturing discusses lighting load-shedding strategies, such as daylight harvesting, occupancy sensing, task management and demand response as well as the trends towards the interaction of lighting control with other building functions. Read more »

Horticulture | Components | LEDs | White LEDs | UV LED | Aug 26, 2020

Broadband Neutral White LEDs Including Effective UV Component Modelled on the Sun for Rapid Plant Growth

Broadband Neutral White LEDs Including Effective UV Component Modelled on the Sun for Rapid Plant Growth With the plant LEDs GW3535U and GW1919U (COB) euroLighting offers new broadband LEDs with a special spectrum for stimulating plant growth (horticulture lighting). The advantage: the LEDs are not restricted to a specific plant species or growth phase, but can be used universally. Ready-to-use lamps with the new LEDs will also be available soon. Read more »

News-Spot | Business News | Apr 22, 2016

Founders of RAYLASE Receive EPIC Phoenix Award 2016 that Recognizes Entrepreneurship in Photonics

Founders of RAYLASE Receive EPIC Phoenix Award 2016 that Recognizes Entrepreneurship in Photonics RAYLASE Group has its headquarters in Weßling, Germany and a subsidiary in China, located in Shenzhen. Both entities are doing production of components, submodules and software to deflect, modulate and control laser beams in a broad variety of applications e.g. marking, drilling, cutting, engraving and welding in growing and demanding markets worldwide. Read more »

Simulation Tools | Engineering | White Papers | Optics + Opt. Materials | Resources

WHITE PAPER: "Optimization of LED Lens Components using TracePro® Illumination Design and Analysis Software"

Side Emitting lens and reflector combination initial configuration with large angular output and 62% efficiency. TracePro® is award-winning opto-mechanical design software for layout, optimization, & analysis of illumination systems. This white paper illustrates how TracePro’s 2D & 3D optimization utilities are designed to help CAD designers without optical engineering expertise design a variety of LED optical components – including practical examples. The capabilities of TracePro lead the designer through a process to maximize the technical merits of the device/system in the shortest amount of time. Read more »

FEATURED

Emergency Lighting Just Got Smarter

Emergency Lighting Just Got Smarter NEW NOW: OSRAM’s standalone solution for emergency lighting testing, reporting and maintenance. Meet the QBM DALI EL-T CONV, a converter transforming existing DALI emergency luminaires into wireless ones, all controlled by the same lighting system. Its benefits? Allowing you to design all the ... Read more »

FEATURED

Continuous versus Discrete Calibration Sources: Consideration for Use

Continuous versus Discrete Calibration Sources: Consideration for Use Rapid advancements in the field of solid-state lighting have presented opportunities for the use of LED-based systems for calibrations typically performed with lamp-based sources. Their highly efficient and long-lived performance, rapid power up, and compact size have made LED-based sources an ... Read more »

FEATURED

LUXTECH Offers First Compelling Flex Modules Designed to Replace Traditional Rigid Modules: LUXroll (UL Listed)

LUXTECH Offers First Compelling Flex Modules Designed to Replace Traditional Rigid Modules:  LUXroll (UL Listed) The Indirect Costs of Using Rigid Boards Make Switching to Flexible LED Modules a Compelling Choice. Read more »

EDITORIAL

New LUXEON Rubix Cyan LED Enables 96-98 CRI Across CCT Range in Color Driven Solutions for Entertainment, Stage, and Studio

New LUXEON Rubix Cyan LED Enables 96-98 CRI Across CCT Range in Color Driven Solutions for Entertainment, Stage, and Studio Lumileds added cyan, its eighth color, to the LUXEON Rubix high-power LED family enabling multi-color driven systems to produce very high CRI white light that is so important in entertainment lighting. Adding the cyan LED fills a significant wavelength gap between blue and green in a system and ... Read more »

EDITORIAL

New date: Light + Building Autumn Edition 2022

New date: Light + Building Autumn Edition 2022 Frankfurt am Main, January 10, 2022. As the pandemic situation continues to develop very dynamically, Messe Frankfurt is postponing the world's leading trade fair for light and building technology to autumn 2022. Last December, intensive discussions with customers and cooperation partners had ... Read more »

page_peel