Most Recent

UV-C | UV-LEDs | May 15, 2020
CIE Position Statement on the Use of UV Radiation to Manage the Risk of COVID-19 Transmission
CIE Position Statement on the Use of UV Radiation to Manage the Risk of COVID-19 Transmission The coronavirus disease (COVID-19) pandemic has accelerated the search for environmental controls to contain or mitigate the spread of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) responsible for the disease. SARS-CoV-2 is usually transmitted from person to person by contact with large respiratory droplets, either directly or by touching virus-contaminated surfaces (also denoted as fomites) and subsequently touching the eyes, nose or mouth. Importantly, there is growing evidence of virus transmission via the airborne route as the large respiratory droplets dry out and form droplet nuclei which can remain airborne for several hours. Depending on the nature of the surface and environmental factors, fomites can remain infectious for several days (van Doremalen, 2020). The use of germicidal UV radiation (GUV) is an important environmental intervention which can reduce both contact spread and airborne transmission of infectious agents (like bacteria and viruses). GUV within the UV-C range (200 nm–280 nm), primarily 254 nm, has been used successfully and safely for over 70 years. However, GUV must be knowledgably applied with appropriate attention to dose and safety. Inappropriate GUV application can present human health and safety issues and produce insufficient deactivation of infectious agents. Application in the home is not advisable and GUV should never be used to disinfect the skin, except when clinically justified. Read more »
HCL | May 15, 2020
Bridgelux Develops a New Metric to Quantify the Naturalness of Light
Bridgelux Develops a New Metric to Quantify the Naturalness of Light Bridgelux today announced development of a new metric to enable objective comparisons of light sources to natural light. With the growing market interest in human-centric lighting, the question of “naturalness” of light source spectra is becoming a frequently asked question. Standard lighting quality metrics such as CRI and TM-30 do not fully address the naturalness question. The Average Spectral Difference (ASD) metric has been developed by Bridgelux to address this shortcoming in available light quality metrics. Read more »
Automotive | IR-LEDs | May 15, 2020
Intuitive Interaction: Ultra-compact Infrared LED from Osram Enables Gesture Control in Car Interiors
Intuitive Interaction: Ultra-compact Infrared LED from Osram Enables Gesture Control in Car Interiors Automotive interior design is currently undergoing a fundamental change. Displays are getting larger, the number of manual controls is decreasing, and customizable lighting solutions are creating a feel-good atmosphere. Advanced driver assistance systems (ADAS) and technologies previously designed for mobile devices – such as facial recognition, eye tracking or gesture control – are increasingly making their way into the automotive sector. These technologies are based on infrared light. The smaller and more powerful the required components, the easier they are to integrate into complex designs. Osram’s Oslon Piccolo now offers an extremely compact infrared LED (IRED) that packs enormous power in a small package, making it ideal for customers. Read more »
Measurement | Tools | May 15, 2020
Measuring Uniformity of LED Luminaires in Seconds: MKS Announces Ophir® FluxGage™ 604 Measurement System
Measuring Uniformity of LED Luminaires in Seconds: MKS Announces Ophir® FluxGage™ 604 Measurement System MKS Instruments, Inc. (NASDAQ: MKSI) has announced the Ophir® FluxGage™ 604 compact measurement system for LED luminaires. This new series features four additional color sensors evenly arranged in the bottom of the device delivering further x,y, and CCT data as well as the illuminance. Within seconds the user gets an overview of the color and overall uniformity of the measured light. This allows direct evaluation of LED chips or optical assemblies used for color mixing and beam shaping within the design process in order to find the optics that provide the optimal light for a particular application. The system can also be used in end-of-line LED luminaire production applications to instantly detect issues, ensuring high quality product standards are met. The Ophir FluxGage measurement system also measures total luminous flux, color parameters and flicker. Read more »
HCL-Research | Research News | Full Spectrum LEDs | Health + Wellbeing | Color Perception | May 11, 2020
Executive Summary on "A Study on the Perception of Full Spectrum LEDs" Published
Executive Summary on "A Study on the Perception of Full Spectrum LEDs" Published From a LED producer's perspective, it is essential to have knowledge about the perception of LEDs by human beings. To consolidate existing and gain new knowledge on recently introduced Full Spectrum LEDs, which claim to bring natural light quality into electric lighting appliances, the Fraunhofer Institute for Building Physics (Germany) conducted a study in cooperation with three main LED manufacturers Nichia (Japan), Seoul Semiconductor (Korea), Toshiba Materials (Japan) and the LED gear supplier Lumitronix (Germany). Read more »
SSL | Systems + Applications | Luminaires | Tunable White Light | May 07, 2020
Zumtobel Presents CLEAN II: Clean Light You Can Rely On
Zumtobel Presents CLEAN II: Clean Light You Can Rely On Some situations demand light in its purest form: when maximum concentration is required. When hygiene and resistance are top priority. When every inch of a room needs to be brightly illuminated. In a hospital, a laboratory, a food production facility. The supreme and industry versions of Zumtobel's CLEAN II take on these special lighting tasks. With their ultra-resistant, discreet design, they focus on what's essential: pure light. tunableWhite technology provides additional support, and perfect white light quality. Read more »
SSL | Systems + Applications | Lamps | MR16 Replacement | May 07, 2020
LUBO Lighting Launches VEGALux High Performance MR16 System Providing Up To 1,500 lm
LUBO Lighting Launches VEGALux High Performance MR16 System Providing Up To 1,500 lm In its aim to develop high-performance, long-lasting and robust lighting solutions, LUBO Lighting, leading Canadian landscaping and architectural lighting developer and manufacturer, is proud to present its new, state-of-the-art VEGALux system. The new VEGALux MR16 light bulbs are available in three variations: VEGALux 336L, 680L and 1500L. Read more »
Business | Event News | Event Announcement | Light+Building | May 06, 2020
New Date: Light + Building Will Be Held Again in Its Normal Sequence in 2022
New Date: Light + Building Will Be Held Again in Its Normal Sequence in 2022 In view of the world-wide situation caused by the Corona pandemic, and the prohibitions on events and travel restrictions associated with it, Messe Frankfurt has decided, jointly with its partners – ZVEI and ZVEH – and with the Trade Fair Advisory Council, to defer the eleventh Light + Building and to hold it, in accordance with its normal sequence, from 13 to 18 March 2022. Read more »
Research News | Technologies | Special Applications | Manufacturing | 3D Printing | May 04, 2020
Austrian Tech University Graz Revolutionizes 3D Metal Printing Using LEDs
Austrian Tech University Graz Revolutionizes 3D Metal Printing Using LEDs A technology developed at Graz University of Technology uses LED instead of laser sources for the additive manufacturing of metal parts and optimizes 3D metal printing in terms of construction time, metal powder consumption, equipment costs and post-processing effort. Read more »
Resources | Tech-Talks Bregenz | Health + Environment | Quality | May 04, 2020
Tech-Talks BREGENZ - Prof. Ruairí O'Brien, Founder of Ruairí O'Brien Lighting Design
Tech-Talks BREGENZ - Prof. Ruairí O'Brien, Founder of Ruairí O'Brien Lighting Design Ruairí O'Brien, associate professor and head of the Architecture and Visual design department at the German University in Cairo and CEO of Ruairí O'Brien. Architektur. Licht Raumkunst, surprised and delighted the audience with his lecture at LpS 2016 when he talked about allowing darkness. He expressed the same sentiments in a caption for a figure in the proceedings booklet: "The future in Dresden is not lighting excess - the future is Re-Darkness with intelligent SSL concepts." This year, Ruairí held two lectures at TiL in which he emphasized how important a thorough application of light is in respect to culture, ethics, and environment. In addition to his work, these interesting statements made it made a Tech-Talk Bregenz with him a top priority. Read more »
Resources | Commentary | Smart Lighting + IoT | Health + Wellbeing | May 04, 2020
Personal Lighting Profiles Might Be the Key to Creating a Natural "Work Light Balance"
Personal Lighting Profiles Might Be the Key to Creating a Natural "Work Light Balance" Commentary from LpR 76: Henrik Clausen has been involved in lighting for over 30 years in both commercial and academic positions. In 1996, he became the Managing Director of Fagerhult Lighting in Denmark, and held that position until 2004, when he founded the Fagerhult Lighting Academy. In 2015 he also became Head of Research for Fagerhult. He holds a position as professor in Lighting Design at AAU in Copenhagen. He guest lectures at various Universities around the world. He speaks worldwide, primarily addressing the human and emotional aspects of light and lighting design. Read more »
Resources | Tech-Talks Bregenz | Wilfried Kramb | Opinions | May 04, 2020
Tech-Talks BREGENZ - Wilfried Kramb, Interior & Lighting Designer, a∙g Licht
Tech-Talks BREGENZ - Wilfried Kramb, Interior & Lighting Designer, a∙g Licht TTB from LpR 75: The value of lighting design and light planning has always been underestimated, despite it becoming more important with the rise of Solid-State-Lighting. This is a fact that the public doesn't realize, even though the industry does. Digitalization, compared with the special properties of LED lighting and the aim of the lighting industry to establish their IoT hubs, is a new challenge. This is even more apparent when trying to integrate light sources directly in building structures. Responsibilities and tasks are no longer clearly separated between the different disciplines of architect, lighting designer, IT planner and electro planner. Guenther Sejkora and Arno Grabher-Meyer talked with Wilfried Kramb, owner and CEO of a·g Licht, about these tendencies and topic. Read more »
Fundings + Projects | Research News | Office Lighting | Health + Wellbeing | May 04, 2020
Repro-Light Consortium Announce Intelligent Workspace Lighting Concept
Repro-Light Consortium Announce Intelligent Workspace Lighting Concept The pioneering design team at Bartenbach unveils a brand-new intelligent lighting concept set to revolutionize workspace personalization. It is set to deliver a truly user-centric, workspace lighting blueprint for lighting designers to transform workspaces for healthier living. The story began with Bartenbach's involvement in the Repro-light project consortium, funded through the European Commission's Horizon 2020 work program. The scope of the project, "To successfully initiate transformation in the European LED lighting industry, by creating the 'Luminaire of the Future'." Part of this remit was to develop a new customizable lighting system. Read more »
Resources | Commentary | Health + Environment | Quality | May 04, 2020
Providing Better Light Should Still be the Focus of the SSL Industry
Providing Better Light Should Still be the Focus of the SSL Industry Commentary from LpR 75: As President of Bardsley Consulting, Norman advises industry, government and academia on solid-state lighting, flat panel displays and energy efficiency, with special emphasis on diffuse lighting and organic electronics. He is a member of the Technical Advisory Team for the Solid-State Lighting Program of the US Department of Energy. Dr. Bardsley also acts as Chief Analyst for the International Solid-State Lighting Alliance (ISA) and is a member of the UNEP Expert Task Force on LED Lighting and Controls. Read more »
Tools | Measurement | Test Equipment | Flicker | May 04, 2020
Gigahertz-Optik's BTS256-EF now Offers Enhanced Flicker Frequency Range up to 40 kHz
Gigahertz-Optik's BTS256-EF now Offers Enhanced Flicker Frequency Range up to 40 kHz The BTS256-EF by Gigahertz-Optik GmbH, a well-known measuring device manufacturer, has already been up to that challenge for many years. It offers a wide selection of measuring quantities relevant in general lighting and hence acts as universal measuring device in its field. Now, the device has been updated to record and analyze even higher flicker frequencies than before: It supports signal sampling with up to 40 kHz. Read more »
Components | UV | UV-LEDs | UV-C | Disinfection | May 04, 2020
Effective UV-C LED Solutions for Pathogen Containment, Medical and Biotechnical Applications at euroLighting
Effective UV-C LED Solutions for Pathogen Containment, Medical and Biotechnical Applications at euroLighting Short UV-C light has been proven to kill 99.9 percent of bacteria, viruses and other pathogens. euroLighting offers new product solutions in the form of UV-C LEDs, the effect of which can be used specifically to effectively sterilise air, water and surfaces and greatly reduce the risk of infection. Based on the current virus pandemic and in view of statements by experts that such situations could occur more frequently in the future, solutions are urgently sought to contain the spread of pathogens as quickly and effectively as possible. Read more »
Components | UV | UV-LEDs | UV-Modules | UV-C | Disinfection | May 04, 2020
Lumitronix Provides Solutions for Use of UV-C LED Under Real Conditions
Lumitronix Provides Solutions for Use of UV-C LED Under Real Conditions As an official distributor of Nichia in Europe, the Hechingen-based LED company Lumitronix offers access to the most powerful UVC LED currently on the market. The NCSU334A emits a wavelength of 280 nm in the ultraviolet range and especially in the UV-C band and enables immediate sterilization and cleaning of air, liquids and surfaces. Bacteria, germs and viruses can be reliably killed in this way. This means that the UV LED from the world's largest LED manufacturer can also act as a possible weapon against the novel corona virus. Read more »
Resources | Standardization | Smart Lighting + IoT | Thread | DiiA | May 04, 2020
Thread Group and DiiA Collaborate to Shape the Future of IoT Lighting for Commercial Buildings
Thread Group and DiiA Collaborate to Shape the Future of IoT Lighting for Commercial Buildings The Thread Group, an alliance addressing convergence, security, power, and architecture challenges at the network layer, and the DiiA, the global DALI alliance of companies from the lighting and sensor industries, have announced a liaison agreement today with the shared intention of accelerating IoT adoption in commercial buildings. Read more »
Business | Company News | Divestment | Apr 29, 2020
LG Innotek Sells off LED Business
LG Innotek Sells off LED Business According to THE ELEC, Korea Electronics Industry Media, and other industry sources, on April 21, LG Innotek has sold off its LED business, with Wooree E&L and Seoul Semiconductor taking over the BLU LED sales rights. Read more »
SSL | Components | LED Modules | Linear Modules | Apr 29, 2020
Xicato's New Premium Smart Linear LED Lights Join Their End-to-End Solutions with Smart Drivers and Controls
Xicato's New Premium Smart Linear LED Lights Join Their End-to-End Solutions with Smart Drivers and Controls Xicato, the leading provider of Bluetooth smart building wireless controls and highest quality light sources, today announced the introduction of XFL, the next generation of smart enabled linear lighting solutions that live up to quality standards the company's LED spot lights have set for the market over the past 12 years. The complete and focused portfolio is designed to support creativity and ease of product selection for lighting designers, specifiers, and customers without the typical pain of searching through endless legacy SKUs often associated with other product portfolios in the market. Read more »
HCL | Components | LED Modules | Apr 29, 2020
GlacialLight - New Natural Sunlight GL-LMR50-12-24V-NL with DC Input Voltage
GlacialLight - New Natural Sunlight GL-LMR50-12-24V-NL with DC Input Voltage GlacialLight, the LED lighting division of GlacialTech Inc., announces the natural sunlight GL-LMR50-12-24V-NL with DC 24 V of 3000 K warm white. With a CRI of 97, as well as the CQS (Color Quality Scale) is up to 97. The color fidelity index (TM-30-15 Rf) and color gamut score (TM-30-15 Rg) are close to natural sunlight. It can be non-dimmable and dimmable with given the appropriate DC electrical signal; the brightness can be freely adjusted with DC constant voltage PWM signal. GlacialPower GP-CVM constant voltage series driver provides non-dimmable and most popular three dimming functions include AC-TRIAC dimming, 3-in-1 dimming and DALI dimming for greater lighting flexibility and are suitable for GL-LMR50-12-24V-NL. Read more »
SSL | Systems + Applications | Luminaires | Apr 28, 2020
Tom Dixon and Prolicht Collaboration Leads to a New Lighting Range - CODE
Tom Dixon and Prolicht Collaboration Leads to a New Lighting Range - CODE British designer Tom Dixon and leading manufacturer of architectural lighting Prolicht, today announce their collaboration and unveil their new lighting range: CODE. The common ambition was to rethink track lighting and to celebrate the fast-developing world of electronics and LEDs. Their partnership enables a unified proposal for architects and designers: a unique combination of highly technical and decorative lighting in one product. Read more »
Resources | Standardization | TALQ | Smart Cities | Apr 28, 2020
TALQ Integrates Further Smart City Features - Updated TALQ Specification 2.2.0 Includes Additional Functions
TALQ Integrates Further Smart City Features - Updated TALQ Specification 2.2.0 Includes Additional Functions The TALQ Consortium, which has developed a global interface standard for managing street lighting networks and other smart city applications, has released and approved a new version of the TALQ Specification, 2.2.0; an updated version of the Certification Test Tool was also released. All the changes and added features are backward compatible with the former 2.1.0 release, guaranteeing reliable interoperability of all certified TALQ-compliant products certified against any TALQ 2 version. Read more »
SSL | Smart Lighting + IoT | Components | Apr 28, 2020
Douglas Lighting Controls® Introduces New Intelligent Fixture Sensor and Intelligent Fixture Controller
Douglas Lighting Controls® Introduces New Intelligent Fixture Sensor and Intelligent Fixture Controller Douglas Lighting Controls®, a member of the Panasonic family of companies, recently introduced the new Intelligent Fixture Sensor (IFS) and Intelligent Fixture Controller (IFC) to its high-performance lighting products portfolio. Specially designed for Luminaire Level Lighting Controls (LLLC), the IFS units can be deployed as independent, fixture-mounted occupancy and daylight sensors. As an alternative, they can be networked with the Dialog® controllers and other devices in the Dialog ecosystem, including wall station switches, load controllers and low voltage ceiling mount sensors, to create a complete Bluetooth® wireless lighting control system. Read more »
Indoor Applications | Smart Lighting + IoT | Systems + Applications | SSL | Office Lighting | Components | Apr 23, 2020
Making Office Lighting Smart with HubSense from Osram
Making Office Lighting Smart with HubSense from Osram Osram presents the HubSense intelligent lighting management system, an easy-to-commission and scalable solution for retrofitting LED office lighting. HubSense is based on standardized "Qualified Bluetooth Mesh" technology and is ideal for upgrading existing lighting systems in small and medium-sized businesses. Existing installations can therefore be updated without new cabling and without the use of a gateway or any other IT equipment. HubSense is also suitable for new installations in single offices, open-plan offices, corridors and conference rooms and offers the flexibility needed to adapt the lighting to changes in room usage. Read more »
Resources | Standardization | Zhaga | DiiA | Outdoor Applications | Apr 23, 2020
First Outdoor LED Luminaires Received Zhaga-D4i Certification
First Outdoor LED Luminaires Received Zhaga-D4i Certification The Zhaga Consortium (Zhaga) and the Digital Illumination Interface Alliance (DiiA) have reached a key milestone in their joint Zhaga-D4i certification program. Several luminaires from Signify and Schréder have been certified according to this new program. They can carry the dual logos of Zhaga and D4i which together indicate interoperability of luminaires, sensors and/or communication nodes. Read more »
Components | UV | UV-LEDs | UV-C | Disinfection | Apr 23, 2020
Luminus Breaks the $0.10 per mW Barrier for UV-C LEDs
Luminus Breaks the $0.10 per mW Barrier for UV-C LEDs Luminus Devices announces the immediate availability of its newest UV-C LED, the XBT-3535, with performance ranging from 50 mW to 80 mW in the 275-285 nm range. With the global need for disinfection and sterilization devices increasing, the price-performance combination of the XBT-3535 will allow companies to quickly bring novel and affordable solutions to market. Read more »
page_peel