UV & IR Applications

SSL | Components | LEDs | IR-LEDs | Special Applications | Sep 30, 2020
Osram Presents the World's Smallest Broadband IR LED for Spectroscopy Applications
Osram Presents the World's Smallest Broadband IR LED for Spectroscopy Applications Is the shirt on the shelf really made of 100% cotton? Does the apple in the supermarket only look delicious, or is it spoiled and vitamin deficient? A closer look at the molecular structure provides the answers to these questions. Near-infrared spectroscopy makes that possible. For many years, Osram Opto Semiconductors has been a leader in the development of compact and particularly powerful broadband infrared emitters for spectroscopy. In addition to the broad wavelength range, the energy efficiency of the integrated components is essential to system manufacturers, as are the compact dimensions. Osram's Oslon P1616 SFH 4737 combines these properties and offers even further benefits for customers. This product will soon make mobile spectroscopy solutions a reality. Read more »
Automotive | IR | Components | Gesture-Control | Sep 28, 2020
Maxim Dynamic Gesture Sensing for Automotive Applications at Industry's Lowest Cost and Smallest Size
Maxim Dynamic Gesture Sensing for Automotive Applications at Industry's Lowest Cost and Smallest Size Designers of automotive systems can now add dynamic hand-gesture controls with greater ease at the industry's lowest cost and smallest size with the MAX25205 data acquisition system from Maxim Integrated Products, Inc. Featuring integrated optics and a 6x10 infrared (IR) sensor array, the MAX25205 detects swipe and hand-rotation gestures without the complexity of time-of-flight (ToF) cameras at 10x lower cost and up to 75 percent smaller size. Read more »
SSL | UV | UV-C | Systems + Applications | Water-Purification | Sep 28, 2020
PearlAqua Deca™, World's First UV-C LED Point-of-Entry System Hits the Water Treatment Market
PearlAqua Deca™, World's First UV-C LED Point-of-Entry System Hits the Water Treatment Market AquiSense Technologies, the world leader in ultraviolet (UV) LED water disinfection systems, is happy to announce it has launched the PearlAqua Deca™, the first UV LED disinfection system designed for the point-of-entry residential, commercial and light industrial markets. The PearlAqua Deca offers operational benefits specific to LEDs, including intermittent flow management, mercury free, and low cost of ownership. Read more »
SSL | Components | CoB LEDs | UV-LEDs | UV-C | Displays | Sep 11, 2020
Stanley Electric Proves 99.9% Inactivation of SARS-CoV-2 for 265 nm UV-C LED in Mass Production
Stanley Electric Proves 99.9% Inactivation of SARS-CoV-2 for 265 nm UV-C LED in Mass Production Stanley Electric Co., Ltd. announced that their recently released 265 nm UV-C LED is in mass production and its effectivity to fight SARS-CoV-2 has been tested in cooperation with the Yamaguchi-University by Dr. Daisuke Hayasaka and Dr. Hiroshi Shimoda. As a result of the conducted evaluation test, Stanley Electric has confirmed high effectiveness of virus inactivation (inability to multiply) of SARS-CoV-2(the virus that causes COVID-19)using their 265 nm UVC LED. Read more »
SSL | UV | UV Measurement | UV-C | Sep 11, 2020
Gigahertz-Optik UVC Radiometer for Germicidal UV Sources Including 222 nm Excimer Lamps
Gigahertz-Optik UVC Radiometer for Germicidal UV Sources Including 222 nm Excimer Lamps The new X1-1-UV-3727 radiometer is designed to accurately measure the far-UVC irradiance or dose produced by 222 nm excimer lamps. This is in addition to the measurement of other germicidal UV source types including low pressure Hg lamps and UV LEDs. Each meter has a wide dynamic range and is supplied with a traceable calibration certificate from the ISO-17025 accredited Gigahertz-Optik laboratory. Read more »
SSL | Components | UV LED | UV-Modules | Disinfection | Sep 09, 2020
Seoul Viosys Violeds Module that Sterilizes 99.9% of Coronavirus in 3 Seconds in Mass Production
Seoul Viosys Violeds Module that Sterilizes 99.9% of Coronavirus in 3 Seconds in Mass Production Seoul Viosys, a leading compound semiconductor solution provider, announced that it has developed an optimal module designed to sterilize 99.9% of the coronavirus in 3 seconds using "Violeds", a UV LED technology, and started mass production. Along with this, Seoul Viosys is developing a so-called "Photon Shower" product that is applied with this technology to contribute to the safety of medical staff and patients who have been struggling amid COVID-19 pandemic. Read more »
SSL | Components | UV | UV-C | UV-Modules | Disinfection | Aug 05, 2020
Lumitronix Adds New UV-C LED Modules for Sterilization and Decontamination to Its UV Portfolio
Lumitronix Adds New UV-C LED Modules for Sterilization and Decontamination to Its UV Portfolio The Swabian LED company Lumitronix has used the current situation to expand its range of products in the UV-C sector. Within a short period of time, three linear module solutions have been developed, which are primarily aimed at professional customers who are trained in the use of UV-C radiation and can ensure hazard-free operation. Read more »
SSL | Components | UV | UV LED | Special Applications | Jul 24, 2020
OMC Announces New Ultra-High-Efficiency IR SMA Fibre-Optic Transmitter LED - FDE870HE
OMC Announces New Ultra-High-Efficiency IR SMA Fibre-Optic Transmitter LED - FDE870HE OMC, the pioneer in optoelectronics design & manufacture, announces its new FDE870HE industrial fibre optic transmitter LED that can deliver up to four times more launch power into multimode fibre for the same current versus existing transmitter devices. This ultra-efficient transmitter contains a high-performance 870 nm chip and features an array of micro-optic elements that gather and focus the emitted photons, coupling considerably more light into multimode optical fibres and enabling data to be transmitted reliably over greater distances, or for the system to use less power to achieve the same result. Greater long-term reliability of the system is a further benefit due to the vastly enhanced day-1 launch power and much lower drive current requirements. Read more »
SSL | UV | Special Applications | UV curing | Jul 24, 2020
FireJet™ ONE - The ONE Solution for All Your UV Curing Needs
FireJet™ ONE - The ONE Solution for All Your UV Curing Needs Phoseon Technology introduces the industry's smallest, highest-powered member of their air-cooled product line, the FireJet™ ONE. These premium 20 W/cm² UV LED curing lamps are designed primarily for the inkjet, flexographic and screen printing markets where high power in a compact form factor, is a key requirement. Read more »
SSL | IR | IR-LEDs | Special Applications | Jul 22, 2020
Ushio's Epitex D-Series SWIR LEDs Now Up to Four Times More Powerful
Ushio's Epitex D-Series SWIR LEDs Now Up to Four Times More Powerful Ushio has commenced production of its latest high-powered short-wavelength infrared (SWIR) LEDs, the Epitex D-Series. Following the prior success of the S-Series, the Epitex D-Series achieves the world's highest output power and efficiency: The high-power versions have ramped up their forward current to 1 A and gain a boost of up to four times the original radiated power output. Read more »
Luminaires | UV | Disinfection | Jul 14, 2020
LumenFocus Launches UVFocus Line of Germicidal Luminaires
LumenFocus Launches UVFocus Line of Germicidal Luminaires Ultraviolet technology has been used for disinfection for many years now, but COVID-19 is shining a new light on its potential for disinfection applications. It is because of this unfortunate situation that we are looking at different ways that lighting technology can be used to help beyond just illuminating a space. Read more »
SSL | Components | UV | UV-C | Disinfection | Jun 29, 2020
GKT's New UV-C Board Combines LEDIL's "VIOLET" and NICHIA's "NCSU334A"
GKT's New UV-C Board Combines LEDIL's "VIOLET" and NICHIA's "NCSU334A" In these turbulent times, we need reliable disinfection. Large amounts of water or large areas must be disinfected quickly within a few seconds. We offer a new design for this. Based on the new LEDIL "VIOLET" UV-C 12x multibeam lens, we have combined with the also new UV-C LED "NCSU334A" from NICHIA. Read more »
SSL | Systems + Applications | Products, Materials + Tools | Components | Luminaires | UV | UV-C | Jun 26, 2020
Signify Invests to Broaden Its UV-C Lighting Portfolio for Professional Disinfection
Signify Invests to Broaden Its UV-C Lighting Portfolio for Professional Disinfection Signify, the world leader in lighting, is increasing its UV-C lighting production capacity and expanding its UV-C product portfolio. The company is leveraging more than 35 years of expertise in UV-C lighting to address the growing global need for the disinfection of air, surfaces and objects. Read more »
Tools | Test Equipment | UV Measurement | UV-C | Jun 04, 2020
Ultraviolet Germicidal Irradiation: High-Precision UVC Exposure Measurements from Gamma Scientific
Ultraviolet Germicidal Irradiation: High-Precision UVC Exposure Measurements from Gamma Scientific Gamma Scientific announces the release of its Germicidal Ultraviolet Irradiation measurements system to perform irradiance and radiant exposure measurements in the UVC region of the spectrum. The system consists of the model 268UVC sensor, which measures 37 mm in diameter with an active area of 11 mm². The sensor, when paired with a Gamma Scientific optical power meter and energy meter, is capable of measuring irradiance levels ranging from 0.05 μW/cm² to 500 mW/cm². Read more »
UV | Measurement | Featured | May 25, 2020
Precise Measurement of UV Light Sources for Disinfection
Precise Measurement of UV Light Sources for Disinfection UV radiation encompasses a very wide wavelength spectrum between 10 and 400 nm and is subdivided in ISO Standard 21348 into three ranges. The UVC range between 100 and 280nm is currently extremely relevant for air and water disinfection for combating COVID-19. Since the outbreak of the pandemic this has been manifested, among other things, in a sharp increase in the demand for UVC light sources. Read more »
UV-C | UV-LEDs | May 15, 2020
CIE Position Statement on the Use of UV Radiation to Manage the Risk of COVID-19 Transmission
CIE Position Statement on the Use of UV Radiation to Manage the Risk of COVID-19 Transmission The coronavirus disease (COVID-19) pandemic has accelerated the search for environmental controls to contain or mitigate the spread of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) responsible for the disease. SARS-CoV-2 is usually transmitted from person to person by contact with large respiratory droplets, either directly or by touching virus-contaminated surfaces (also denoted as fomites) and subsequently touching the eyes, nose or mouth. Importantly, there is growing evidence of virus transmission via the airborne route as the large respiratory droplets dry out and form droplet nuclei which can remain airborne for several hours. Depending on the nature of the surface and environmental factors, fomites can remain infectious for several days (van Doremalen, 2020). The use of germicidal UV radiation (GUV) is an important environmental intervention which can reduce both contact spread and airborne transmission of infectious agents (like bacteria and viruses). GUV within the UV-C range (200 nm–280 nm), primarily 254 nm, has been used successfully and safely for over 70 years. However, GUV must be knowledgably applied with appropriate attention to dose and safety. Inappropriate GUV application can present human health and safety issues and produce insufficient deactivation of infectious agents. Application in the home is not advisable and GUV should never be used to disinfect the skin, except when clinically justified. Read more »
Automotive | IR-LEDs | May 15, 2020
Intuitive Interaction: Ultra-compact Infrared LED from Osram Enables Gesture Control in Car Interiors
Intuitive Interaction: Ultra-compact Infrared LED from Osram Enables Gesture Control in Car Interiors Automotive interior design is currently undergoing a fundamental change. Displays are getting larger, the number of manual controls is decreasing, and customizable lighting solutions are creating a feel-good atmosphere. Advanced driver assistance systems (ADAS) and technologies previously designed for mobile devices – such as facial recognition, eye tracking or gesture control – are increasingly making their way into the automotive sector. These technologies are based on infrared light. The smaller and more powerful the required components, the easier they are to integrate into complex designs. Osram’s Oslon Piccolo now offers an extremely compact infrared LED (IRED) that packs enormous power in a small package, making it ideal for customers. Read more »
Components | UV | UV-LEDs | UV-C | Disinfection | May 04, 2020
Effective UV-C LED Solutions for Pathogen Containment, Medical and Biotechnical Applications at euroLighting
Effective UV-C LED Solutions for Pathogen Containment, Medical and Biotechnical Applications at euroLighting Short UV-C light has been proven to kill 99.9 percent of bacteria, viruses and other pathogens. euroLighting offers new product solutions in the form of UV-C LEDs, the effect of which can be used specifically to effectively sterilise air, water and surfaces and greatly reduce the risk of infection. Based on the current virus pandemic and in view of statements by experts that such situations could occur more frequently in the future, solutions are urgently sought to contain the spread of pathogens as quickly and effectively as possible. Read more »
Components | UV | UV-LEDs | UV-Modules | UV-C | Disinfection | May 04, 2020
Lumitronix Provides Solutions for Use of UV-C LED Under Real Conditions
Lumitronix Provides Solutions for Use of UV-C LED Under Real Conditions As an official distributor of Nichia in Europe, the Hechingen-based LED company Lumitronix offers access to the most powerful UVC LED currently on the market. The NCSU334A emits a wavelength of 280 nm in the ultraviolet range and especially in the UV-C band and enables immediate sterilization and cleaning of air, liquids and surfaces. Bacteria, germs and viruses can be reliably killed in this way. This means that the UV LED from the world's largest LED manufacturer can also act as a possible weapon against the novel corona virus. Read more »
Components | UV | UV-LEDs | UV-C | Disinfection | Apr 23, 2020
Luminus Breaks the $0.10 per mW Barrier for UV-C LEDs
Luminus Breaks the $0.10 per mW Barrier for UV-C LEDs Luminus Devices announces the immediate availability of its newest UV-C LED, the XBT-3535, with performance ranging from 50 mW to 80 mW in the 275-285 nm range. With the global need for disinfection and sterilization devices increasing, the price-performance combination of the XBT-3535 will allow companies to quickly bring novel and affordable solutions to market. Read more »
UV | Tools | Measurement | UV Measurement | Test Equipment | Disinfection | Apr 08, 2020
UV-C Radiometer for Disinfection Effectiveness and Safety of UV-C LEDs and Germicidal Lamps
UV-C Radiometer for Disinfection Effectiveness and Safety of UV-C LEDs and Germicidal Lamps The X1-1-UV-3726 radiometer enables the effectiveness of UV germicidal irradiation (UVGI) to be accurately determined for both low pressure mercury (254nm) germicidal lamps and UV-C LEDs. Additionally, the device has sufficient sensitivity to detect if undesired exposure poses a photobiological safety risk to users. Read more »
SSL | Technologies | Research News | UV | Disinfection | Apr 02, 2020
Seoul Viosys and SETi's Violeds Technology Proves 99.9% Sterilization of Coronavirus (COVID-19) in 30 Seconds
Seoul Viosys and SETi's Violeds Technology Proves 99.9% Sterilization of Coronavirus (COVID-19) in 30 Seconds Seoul Viosys and Sensor Electronic Technology, Inc. ("SETi"), leading global innovators of UV LED products and technology, announced that it has been successful in achieving 99.9% sterilization of coronavirus (COVID-19) in 30 seconds. Tests were conducted with the research group of Korea University, Korea's top rank university, by using a compound semiconductor Violeds technology that is being mass-produced. Read more »
Featured | UV | UV-LEDs | UV-C | Disinfection | Curing | Apr 01, 2020
Nichia UV LED Technology Supports Evolving Markets
Nichia UV LED Technology Supports Evolving Markets Nichia, a leading global specialist in LED technology, is now aiming to extend its dominance to the UV market following its impressive showcase at the recent RadTech 2020 conference and exhibition in Orlando, Florida, USA. The company's latest solutions remain ideal for curing applications, but an extended portfolio is of particular benefit, as UV is known to be incredibly effective in killing viruses, bacteria, fungi and protozoa. Read more »
UV | Components | UV LED | UV-LEDs | UV-C | Disinfection | Mar 31, 2020
Specification and Applications for ProLight Opto's Recently Released UV-C LEDs
Specification and Applications for ProLight Opto's Recently Released UV-C LEDs Escalation of the Coronavirus outbreak have led to higher demand for Ultra-Violet C (UV-C) LED around the world. UV-C as a germicidal light source can inactivates microorganisms by destroying nucleic acids and disrupting their DNA with its short wavelength. The effective germicidal wavelength is between 200-290 nm; shorter wavelength is more efficient but is also more damaging to the human body. The major chip manufacturers make 265-285 nm as mainstream wavelength, because it can improve single chip's radiometric power and increase in sterilization efficiency. Read more »
SSL | Test Equipment | Safety | UV Measurement | UV | Tools | Mar 03, 2020
Instrument Systems: New Products for the Postponed L+B
Instrument Systems: New Products for the Postponed L+B Instruments Systems has been prepared to feature two new respectively optimized solutions for two different tasks at Light + Building which is postponed to September 27th - October 2nd. Instrument Systems has modified its proven TOP 200 telescopic optical probe to satisfy the requirements of the new IEC TR 62778 technical report. Furthermore, Instrument Systems launches traceable calibration UV-LEDs with extremely low measurement uncertainty. Read more »
Resources | Commentary | UV | Disinfection | Feb 05, 2020
Selecting the UV LED Wavelength for Purification Applications
Selecting the UV LED Wavelength for Purification Applications Patrick Durand is the Worldwide Technical Director at Future Lighting Solutions (FLS) with over 15 years of experience in the solid state lighting industry. Patrick leads the FLS Technical Marketing teams and FLS laboratory teams located in multiple regions around the world with the objective of providing world-class support to lighting OEMs in developing luminaires with the latest SSL technology from the light source to the complete system incorporating the LED driver, optic, thermal management and intelligent control solutions. Read more »
page_peel