McLED

Testing

Los Alamos National Laboratory Announces Dramatic Improvements in QD Technology

Dramatic advances in the field of quantum dot light emitting diodes (QD-LEDs) could come from recent work by the Nanotechnology and Advanced Spectroscopy team at Los Alamos National Laboratory.

LED professional Editors

LED professional

Quantum dots are nano-sized semiconductor particles whose emission color can be tuned by simply changing their dimensions. They feature near-unity emission quantum yields and narrow emission bands, which result in excellent color purity. The new research aims to improve QD-LEDs by using a new generation of engineered quantum dots tailored specifically to have reduced wasteful charge-carrier interactions that compete with the production of light.

“QD-LEDs can potentially provide many advantages over standard lighting technologies, such as incandescent bulbs, especially in the areas of efficiency, operating lifetime and the color quality of the emitted light,” said Victor Klimov of Los Alamos.

Incandescent bulbs, known for converting only 10 percent of electrical energy into light and losing 90 percent of it to heat, are rapidly being replaced worldwide by less wasteful fluorescent light sources. However, the most efficient approach to lighting is direct conversion of electricity into light using electroluminescent devices such as LEDs.

Due to spectrally narrow, tunable emission, and ease of processing, colloidal QDs are attractive materials for LED technologies. In the last decade, vigorous research in QD-LEDs has led to dramatic improvements in their performance, to the point where it nearly meets the requirements for commercial products. One outstanding challenge in the field is the so-called efficiency roll-off (known also as “droop”), that is, the drop in efficiency at high currents.

“This ‘droop’ problem complicates achieving practical levels of brightness required especially for lighting applications,” said Wan Ki Bae, a postdoctoral researcher on the nanotech team.

By conducting spectroscopic studies on operational QD-LEDs, the Los Alamos researchers have established that the main factor responsible for the reduction in efficiency is an effect called Auger recombination. In this process, instead of being emitted as a photon, the energy from recombination of an excited electron and hole is transferred to the excess charge and subsequently dissipated as heat.

A paper, “Controlling the influence of Auger recombination on the performance of quantum-dot light-emitting diodes” is being published Oct. 25 in Nature Communications. In addition, an overview article on the field of quantum-dot light-emitting diodes and specifically the role of Auger effects appeared in the September Materials Research Society Bulletin, Volume 38, Issue 09, also authored by researchers of the Los Alamos nanotech team.

Not only has this work identified the mechanism for efficiency losses in QD-LEDs, Klimov said, but it has also demonstrated two different nano-engineering strategies for circumventing the problem in QD-LEDs based on bright quantum dots made of cadmium selenide cores overcoated with cadmium sulfide shells.

The first approach is to reduce the efficiency of Auger recombination itself, which can be done by incorporating a thin layer of cadmium selenide sulfide alloy at the core/shell interface of each quantum dot.

The other approach attacks the problem of charge imbalance by better controlling the flow of extra electrons into the dots themselves. This can be accomplished by coating each dot in a thin layer of zinc cadmium sulfide, which selectively impedes electron injection. According to Jeffrey Pietryga, a chemist in the nanotech team, “This fine tuning of electron and hole injection currents helps maintain the dots in a charge-neutral state and thus prevents activation of Auger recombination.”

These studies at Los Alamos National Laboratory were funded by a grant from the U.S. Department of Energy Office of Science.

Did you like this article?

Share this article

You could also like this

Testing

Why detecting defects in LED light modules matters

The latest episode of the LED professional podcast looks at automated LED testing in lighting manufacturing. As LED modules move to higher densities and multi-die designs, manufacturers face growing demands for consistent quality, optical performance and reliability, while production has to stay efficient and cost-effective. The episode explains how automated testing detects defects, measures optical performance, improves production efficiency and reduces quality-related costs. It also takes a closer look at the T100L automatic LED tester from SPEA (Volpiano, Italy), whose fiberless testing technology addresses the limitations of conventional testing methods and is designed for greater flexibility, accuracy and throughput. A seven-minute episode, released on 14 November 2026.

Testing

Glamox opens new laboratory and research facility in Poland

Glamox has opened a new laboratory and research facility near its Dobczyce manufacturing site in Poland to centralize product testing, research and compliance for building, marine and Ex lighting products.

Testing

Automotive LED Light Testing: From Design Trends to Zero Defects Manufacturing

The automotive industry is undergoing a lighting revolution. Driven by design freedom, lighting has evolved from a basic safety necessity into a core element of vehicle identity, passenger experience, and external communication.

Testing

CIE Launches Two Advanced Tutorials on Measurement Uncertainty and LED Reference Spectra

The International Commission on Illumination (CIE) has announced two specialized tutorials taking place in September and November 2026, offering lighting professionals, metrology experts, and researchers an opportunity to deepen their knowledge of modern photometric and radiometric measurement…

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.