Featured | Electromechanics | Connectors | Outdoor Applications | IP-Protection | Feb 12, 2019

BJB Connection Interface for Outdoor LED Modules

The model for the future design of human living areas is a "smart city" with intelligent technologies and applications. Smart Cities utilize sensors and controllers in outdoor lighting to conserve resources and enhance human comfort and safety.

The best LED lighting systems integrate intelligent modules via a 'twistlock' connection. BJB, in accordance with Zhaga Book 18 standards, has developed the 47.121 series of module receptacles for easy installation and exchange of smart modules.

"Electromechanical interfaces have been our speciality for over 100 years" says the developer responsible at BJB. "When the world was first electrified, our company was already focusing on the best ways of combining the light source and luminaire in a harmonious manner. And with LED technology and smart applications for light management, our product range has become even wider." The new 47.121 receptacle represents a universal solution for sensors and communication modules, which are connected by means of a 'twistlock' system. They can be changed, replaced or subsequently installed in an outdoor luminaire without difficulty. In the latter case, the receptacle is temporarily sealed with a tight-fitting cap.

Easy to install, safe to handle and made of high-quality materials

Like every product from BJB, the 47.121 receptacle is designed for safe, long-term use. In addition to the criteria set out in Zhaga Book 18, typical BJB advantages are also evident, such as easy installation and the use of high-quality materials. The receptacle can be attached to carriageway, street and surface area lights in an upwards, sideways or downwards direction by means of a standardised panel cut-out. For communication and data transmission, the connected module is provided with a DC line and DALI 2 or a 2-wire bus. The fourth connection is reserved as a digital IO port. The contacts have a maximum load of 2 A, 24 V. The module is hot pluggable and takes solid or stranded tinned conductors between 0.5 and 1.5 mm. It is certified according to DIN EN 61984 and UL 773 and has protection class ratings IP X5 and IP 6X.

For additional product information, please visit www.bjb.com/en/Outdoor-Lighting-Connectivity-Interface or contact us for samples at:

Company Headquarters:
BJB GmbH & Co. KG
Werler Str. 1
59755 Arnsberg
Germany
Tel.: +49 2932 982 0
E-mail: info@bjb.com

BJB USA:
BJB Electric, L.P.
6375 Alabama Highway
Ringgold, GA 30736
USA
Tel: +1 (706) 965-2526
E-mail: sales@bjb.com

About BJB:

BJB is a world renowned German manufacturer and lighting technology solution provider offering a comprehensive range of products & services: LED modules, COB holders, optical components, PCB fixing elements, SMD connectors, testing and automation solutions. BJB has been a leader in the lighting industry since 1867 and now pioneers innovative solutions for solid-state lighting technology. - www.bjb.com

EDITORIAL

Advanced "Super-Planckian" Material Exhibits LED-Like Light When Heated

Advanced "Super-Planckian" Material Exhibits LED-Like Light When Heated Could there be a new kind of light in the universe? Since the late 19th century, scientists have understood that, when heated, all materials emit light in a predictable spectrum of wavelengths. Research published this week in Nature Scientific Reports presents a material that emits light when ... Read more »

EDITORIAL

LpS/TiL 2020 Cancelled

LpS/TiL 2020 Cancelled DORNBIRN, Austria, February 26, 2020 – In light of the recent postponement of Light + Building to September 2020 and due to the spread of the coronavirus, the organizer of LpS 2020 and TiL 2020, Luger Research e.U. has had to make the decision to cancel the LpS/TiL 2020 events. Read more »

EDITORIAL

WEBINAR (May 14th): How to Achieve Better Products to the Eye Through Virtual Prototyping?

WEBINAR (May 14th): How to Achieve Better Products to the Eye Through Virtual Prototyping? In the CADFEM webinar on May, 14, 2020 you will learn, how physics-based simulations - virtual prototyping - contribute to develop better lighting products. The live presentation pictures the whole process - from editing the geometric model to the definition of light sources and sensors to the use ... Read more »

EDITORIAL

Selecting the UV LED Wavelength for Purification Applications

Selecting the UV LED Wavelength for Purification Applications Patrick Durand is the Worldwide Technical Director at Future Lighting Solutions (FLS) with over 15 years of experience in the solid state lighting industry. Patrick leads the FLS Technical Marketing teams and FLS laboratory teams located in multiple regions around the world with the objective of ... Read more »