Products, Materials & Tools | May 25, 2009

Power Integrations Achieves 92%-Efficient Power Supply for LED Streetlights up to 150W

Power Integrations (Nasdaq:POWI), the leader in high-voltage integrated circuits for energy-efficient power conversion, released a new engineering report (DER-212) describing a 92%-efficient power supply for LED streetlight applications.

The design utilizes Power Integrations' HiperPLC power supply controller, which enables a simple, cost-effective circuit design by combining power factor correction (PFC) and resonant (LLC) control functions on a single integrated circuit. The new design will be showcased in the Power Integrations booth at LED Expo Korea (Kintex, Korea; May 20-23) and LED Lighting Taiwan (Taipei, Taiwan; June 10-12).

LEDs are rapidly emerging as the preferred streetlighting technology, displacing traditional technologies such as high pressure sodium (HPS) lamps. LEDs consume far less electricity for each lumen of useful light emitted, delivering as many as 80 lumens per watt when driven by a high-efficiency resonant power supply, versus just 58 lumens per watt for HPS lamps. In addition, LEDs provide better directional control and color quality than HPS lights, an important consideration in shopping and residential areas. LEDs can also turn on and off instantly and retain their efficiency when dimmed - features well suited to automated sensing of ambient light and human activity, allowing light output to be optimized for cost, with minimal consequences to the community lighting scheme. Maintenance costs, and therefore the total cost of ownership, are also significantly reduced due to the intrinsically high reliability of LEDs compared to HPS lamps.
         
HiperPLC, Power Integrations' first high-power product, is designed to control AC-DC converters from 80 to 600 watts. HiperPLC minimizes costs by reducing the size of the PFC magnetics required, and by combining the PFC and LLC controllers into a single IC.The IC provides up to 0.99 power factor and features synchronization of PFC and LLC controllers. Synchronization reduces the ripple in the bulk capacitors, which reduces capacitor operating temperature and significantly extends the life of the power supply. Support for HiperPLC is now featured in Power Integrations' PI Expert software (version 7.1.4), an automated power supply design tool based on PI products.
          
Comments Doug Bailey, Power Integrations' vice president of marketing: "Municipalities around the world are finding that LEDs offer a greener, more economical approach to streetlighting by saving both energy and maintenance costs. However, these benefits cannot be fully realized without a highly efficient, reliable power supply driving the LEDs. With HiperPLC, designers can produce a simple, reliable, cost-effective, power supply with efficiency as high as 92%."
         
DER-212 is available now for download at www.powerint.com/PDFFiles/der212.pdf. For more information, visit the Power Integrations LED lighting microsite. Power Integrations' PI Expert design software, with full support for HiperPLC, can be downloaded at no cost from http://www.powerint.com/pi-expert.
          
References:
1. DER-212:150 W Power Factor Corrected LLC Power Supply Using HiperPLC (PLC810PG), Power Integrations (5/11/09). www.powerint.com/PDFFiles/der212.pdf
2. Power Integrations' LED Lighting Microsite:www.powerint.com/applications/led-lighting
   
About Power Integrations:
Power Integrations is the leading supplier of high-voltage analog integrated circuits used in energy-efficient power conversion. The company's innovative technology enables compact, energy-efficient power supplies in a wide range of electronic products, in AC-DC, DC-DC and LED lighting applications. Since its introduction in 1998, Power Integrations' EcoSmart(R) energy-efficiency technology has saved an estimated $3.4 billion of standby energy waste and prevented millions of tons of CO2 emissions. The company's Green Room web site (www.powerint.com/greenroom) provides a wealth of information about "energy vampires" and the issue of standby energy waste, along with a comprehensive guide to energy-efficiency standards around the world. Reflecting the environmental benefits of EcoSmart technology, Power Integrations is included in clean-technology stock indices sponsored by the Cleantech Group (Amex: CTIUS) and Clean Edge (Nasdaq: CELS). For more information, please visit http://www.powerint.com.
Add comment

You can add a comment by filling out the form below. Plain text formatting. Comments are moderated.

Question: What is 1 + 3 ?
Your answer:
FEATURED

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000 K CCT, 85°C, Cree’s new eTone COB ... Read more »

FEATURED

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match Luminus Devices latest, fourth generation chip-on-board LED technology (Gen 4) will open new opportunities in retail lighting and a wide range of indoor and outdoor lighting applications. Luminus Gen 4 COB technology combines significant improvements in efficacy, flux density, high maximum drive ... Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel