Systems & Applications | Luminaires | High Bay | Aug 17, 2017

Shat-R-Shield® Launches Ironclad™ LED Vapor Tight High Bay Fixture

Shat-R-Shield, Inc. announces the new Ironclad™ LED Vapor Tight High Bay luminaire as a retrofit for fluorescent fixtures commonly installed in applications exposed to moisture, dust and other harsh elements that require frequent wash-down. With industry leading lumen outputs of 22,000 and 33,000, this high efficiency NSF-rated, non-metallic LED solution replaces a six lamp T8 or six lamp T5 fixture and is ideal for general illumination mounted in ceiling heights of 20-30 feet.

Shat-R-Shield’s Ironclad™ VTHB is constructed of fiberglass reinforced polycarbonate with a seamless gasket seal and stainless steel components for optimal chemical and impact resistance. Its rounded edges allow for easy water shed and durability against high-pressure hose down up to 1500 PSI. The tethered lens is available in clear or frosted for uniform, glare-free illumination.

Offered in 158 watt (22,120 lumens) and 236 watt (32,860 lumens) models, the Ironclad™ VTHB is available with color temperatures of 4000 K or 5000 K, voltages of 120-277 V or 347-480 V, and an option for 90 minutes of battery backup. It comes standard with 0-10 V dimming, has a CRI of 80, L70 of >72,000 hours and an operating temperature of -40°C to 50°C backed by a five-year warranty.

The VTHB boasts an impressive certification base consisting of NSF, DLC, cUL, UL Wet Location and UL1598 with ratings including IP65, IP66, IP67, NEMA 4X, NEMA 5 and 5VA flammability rating. The ruggedness of the luminaire paired with unmatched light performance makes it the quintessential solution for food and beverage processing, industrial facilities, tunnels, parking garages, cold storage, wastewater treatment plants and more.

The Ironclad™ VTHB is proudly manufactured at Shat-R-Shield’s North Carolina facility using globally and domestically sourced components. To learn more please visit www.shatrshield.com/products/led_vthb

About Shat-RShield®:

Shat-R-Shield®, the original manufacturer of shatter‐resistant lamps, has been ensuring lighting safety since 1976. Millions of shatter‐resistant Shat-R-Shield® lamps are currently on-the-job worldwide for foodservice, high-tech manufacturers, food & beverage processors, and institutions seeking the ultimate, cost‐effective worksite protection from broken and shattered glass. Shat-R-Shield® lamps are UL-EPH classified, NSF certified, and meet FDA, OSHA, ASM, Canadian and Mexican Government food safety regulations. The company is located in Salisbury, NC. Please visit www.shatrshield.com or email info1@shatrshield.com

FEATURED

BJB Connection Interface for Outdoor LED Modules

BJB Connection Interface for Outdoor LED Modules The model for the future design of human living areas is a "smart city" with intelligent technologies and applications. Smart Cities utilize sensors and controllers in outdoor lighting to conserve resources and enhance human comfort and safety. Read more »

FEATURED

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000K CCT, 85°C, Cree’s new eTone COB ... Read more »

FEATURED

Nanosilica Filled Epoxy with High Abrasion Resistance

Nanosilica Filled Epoxy with High Abrasion Resistance Master Bond EP30NS is a two component epoxy system that cures at room temperature or more rapidly at elevated temperatures. It is optically clear especially in thin sections and can be used as an adhesive, sealant, coating and encapsulation compound. EP30NS offers dimensional stability, linear ... Read more »

FEATURED

WHITE PAPER - How to Overcome the Security Challenges of Smart Lighting

WHITE PAPER - How to Overcome the Security Challenges of Smart Lighting IoT-powered lighting systems are backbones for smart building applications such as energy harvesting, space optimization, and predictive maintenance. Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel