Business News | Aug 08, 2006

DOE awards seven small business innovation research grants for SSL technology

The U.S. Department of Energy (DOE) has awarded seven Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology. The SBIR program seeks to increase the participation of small businesses in federal R&D.
  • Five Phase I awards will explore the technical merit or feasibility of an innovative concept or technology
  • Two Phase II awards will expand on Phase I results and enable awardees to evaluate the commercial potential of new technology.

To learn more about the DOE Office of Science SBIR program, visit  http://sbir.er.doe.gov/sbir/.

The Phase I awards are listed below:

Recipient: K Technology Corporation
Title : Advanced Materials for Thermal Management in III-Nitride LEDs
Summary : This research will focus on developing advanced materials that can extract heat from light emitting diodes (LEDs), enabling the LEDs to emit higher-intensity light, which will make them more viable for independent light sources such as room lighting.

Recipient: Physical Optics Corporation
Title : Highly Efficient Organic Light Emitting Devices for General Illumination
Summary : This project will focus on improving light extraction efficiency from organic light emitting devices (OLEDs) through development of a new device structure. Improved light extraction efficiency is needed to make OLEDs competitive with conventional lighting devices.

Recipient: Physical Optics Corporation
Title : Microporous Alumina Confined Nanowire Inorganic Phosphor Film for Solid-State Lighting
Summary : This project will explore a new advanced phosphor that, combined with a light-emitting diode, will create a pure white SSL device that is at least 20 percent more efficient than current devices.  The advanced phosphor technology will help to create long-lived devices with fewer environmental hazards associated with both the processing and use of the devices.

Recipient: Universal Display Corporation
Title : Novel Plastic Substrates for Very High Efficiency OLED Lighting
Summary : This research will explore novel plastic substrates to further increase the conversion efficiency of electrical energy into light energy for phosphorescent organic light emitting devices. Ultimately, these white solid-state devices may completely replace conventional incandescent and fluorescent lighting sources.

Recipient: Universal Display Corporation
Title : Novel High Efficiency High CRI Phosphorescent OLED Lighting Containing Two Broad Emitters
Summary : This project will demonstrate a path to novel low-cost, high-efficiency white lighting with a simple device structure that employs only two emissive phosphorescent dopants. This approach will simplify and lower the manufacturing cost of OLED lighting, and make OLEDs more efficient and cost-effective in general lighting applications.

The Phase II awards are listed below:

Recipient: Fairfield Crystal Technology, LLC
Title : Novel Growth Technique for Large Diameter AlN Single Crystal Substrates
Summary : This project will focus on development and commercialization of aluminum nitride single crystal substrates that enable the fabrication of highly efficient light emitting devices for solid-state lighting. Inadequate substrates currently hamper the development of high efficiency, high brightness LEDs for general lighting.

Recipient: Universal Display Corporation             
Title : High Recombination Efficiency White OLEDs
Summary : This project will utilize novel organic light emitting diode (OLED) fabrication techniques developed in Phase 1, and focus on enhancing the power efficiency and operational stability of phosphorescent OLEDs through improvements in the recombination efficiency of electrons and holes in the OLED emissive layer.

FEATURED

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000 K CCT, 85°C, Cree’s new eTone COB ... Read more »

FEATURED

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match Luminus Devices latest, fourth generation chip-on-board LED technology (Gen 4) will open new opportunities in retail lighting and a wide range of indoor and outdoor lighting applications. Luminus Gen 4 COB technology combines significant improvements in efficacy, flux density, high maximum drive ... Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel