Tools | Manufacturing | Test Equipment | Conformal Coating | Jul 24, 2018

Nordson ASYMTEK Combines Conformal Coating and Inspection into One Automated System

Nordson ASYMTEK a Nordson company, a global leader in dispensing, jetting, and coating equipment and technologies, announces an automated coating inspection (ACI) line combining its Select Coat® SL-940 Conformal Coating system with the FX-940UV Series ACI/AOI Automated Conformal Coat Inspection system. Together, the systems ensure a conformal coating process that's accurate and reliable, and delivers ongoing coating quality and consistency.

Eliminating coating problems starts with a high-quality conformal coating system with process controls. The Nordson ASYMTEK Select Coat SL-940 conformal coating system provides the highest quality and productivity for automated coating processes. The system has a wide range of features to monitor and control the process and to provide traceability, such as Fan Width Control, Viscosity Control, Flow Monitoring, a bar code system, and a vision system. Information can be exchanged with customer-specific Factory Information Systems (FIS) and Manufacturing Execution Systems (MES) to ensure factory production workflow.

Conformal coatings used by electronic manufacturers contain UV indicators for the purpose of inspection. Since coatings are transparent, parts must be viewed under ultraviolet or black light to verify coverage and non-coverage. The FX-940UV's advanced, high-power UV lighting and newly available image-processing technology integrate several techniques, including coverage and color inspection, normalized correlation, and rule-based algorithms to provide complete inspection coverage with an unmatched low false-failure rate. Advanced multiple-camera imaging technology offers high-speed inspection with defect coverage. The FX-942 model provides dual-sided viewing (top-down and bottom-up) cameras. The ACI/AOI systems inspect conformal coating coverage and verify correct part assembly in SMT or through-hole applications, improving quality and enhancing yield.

With minimal programming, the inspection set-up is fast and intuitive, typically requiring less than 30 minutes. A known-good board is used to teach the coverage and non-coverage areas. Automated inspection typically takes only a few seconds and results are immediately displayed. These results can be stored and reviewed off-line. The FX-940UV also reads all common barcodes and captures board images for product traceability.

Configurable for several line positions, the FX-940UV ACI series is equally effective for coating, pre- and post-cure, and final assembly inspection. Off-line programming maximizes machine utilization and real-time SPC monitoring provides a valuable yield enhancement solution. The FX-940UV can be fully integrated with a FIS/MES system to capture up-to-the-minute process data. Single-page, quick feedback reports provide an overall view of the inspected board and allow you to zoom in on specific areas of interest, such as around keep out zones and critical components.

Together, Nordson ASYMTEK's Select Coat® SL-940 conformal coating system and FX-940 ACI can team up for coating that is done accurately and reliably.

For more information contact Nordson ASYMTEK at info@nordsonasymtek.com,or visit www.nordsonasymtek.com

About Nordson ASYMTEK:

Nordson ASYMTEK, a world leader in precision fluid dispensing, conformal coating, and jetting technologies, designs and manufactures dispensing and coating systems, supported by an award-winning global applications and service network for over 35 years. To find out more, visit www.NordsonASYMTEK.com

About Nordson Corp:

Nordson Corporation engineers, manufactures, and markets differentiated products and systems that precisely dispense adhesives, coatings, sealants, biomaterials, polymers, plastics, and other materials, fluid management, test and inspection, UV curing, and plasma surface treatment, all supported by application expertise and direct global sales and service. Nordson serves consumer non-durable, durable and technology end-markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, construction, and general product assembly and finishing. Founded in 1954, headquartered in Westlake, Ohio, Nordson has operations and offices in nearly 40 countries. Visit Nordson at www.nordson.com

FEATURED

New Photometer DSP 200 - More Accurate, Faster and Further

New Photometer DSP 200 - More Accurate, Faster and Further Instrument Systems has introduced a new, versatile photometer to the market. The DSP 200 conforms to the highest accuracy grade L to DIN 5032-7 (2017) and has an extremely broad measuring range from 0.1 mlx to 200 klx for all common light sources, including pulse-width modulated LEDs. It is ... Read more »

FEATURED

WHITE PAPER - LEDs Lead the Way for Horticultural Lighting

WHITE PAPER - LEDs Lead the Way for Horticultural Lighting Horticultural lighting is one of the fastest growing markets in the LED lighting industry today. Currently estimated at being worth $690 million dollars annually by LEDInside, this figure is projected to reach billions in the coming years. Read more »

FEATURED

LUXTECH Introduces FLEX Color, Architectural Grade RGB Tape

LUXTECH Introduces FLEX Color, Architectural Grade RGB Tape LUXTECH, a leading American manufacturer of architectural grade LED modules, introduces FLEX Color to their line of flexible LED strips. The RGB strip light is populated by high quality LEDs with tight binning to maintain color consistency. Read more »

FEATURED

Job Opportunity

Job Opportunity Synergy 21 has been a successful, well-known brand in the lighting industry for around 9 years. We satisfy our customers with top-notch planning, development, production, and distribution of high-quality lighting fixtures. We also offer an attractive working environment to over 200 employees at 6 ... Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel