Products, Materials & Tools | Feb 29, 2012

Osram OS Improves Temperature Dependent Efficiency of Oslon SSL LEDs by 25%

Oslon SSL-LEDs by Osram Opto Semiconductors stand for high light output. The new generation of high-power-LEDs will be appreciated by users for its improved performance, with an efficiency increase of approximately 25 percent. Additionally, the luminous flux of the LED at elevated temperatures has now been stabilised. In doing so, it is possible to retain a virtually constant luminous efficacy, despite high application temperatures. Thanks to this optimisation, the luminaire design is significantly simplified.

With the new generation of Oslon SSL LEDs, Osram Opto Semiconductors presents a particularly temperature stable light source. The LED provides a luminous flux of typically 98 lm in warm white (3,000 K), with an operating current of 350 mA at an application temperature of 85°C in the chip. With its typical luminous efficacy of 96 lm/W, referring to the ratio between luminous flux and expended electrical output, it is among the most efficient 1 mm²-Chip-LEDs presently to be found on the market. The combination of higher luminous flux and reduced forward voltage of 3.1 V equals an efficiency increase of approximately 25 percent, when compared with the previous generation. For manufacturers of lighting solutions, this makes luminaire development much easier: a smaller number of LEDs attains the same luminous flux, as well as the same efficiency as before.

Technical Data (at 350 mA operating current):
Dimensions component size: 3 mm x 3 mm
Radiation characteristic: 80° / 150°
Lifetime:                         > 50,000 hours (L70/B50 at Tj=125°C)
Light colors and CRI:      3,000 K: CRI 80 min. / 5,000 K: CRI 70 typ.
Luminous efficacy:         3,000 K: typ. 96 lm/W / 5,000 K: typ. 111 lm/W (@Tj = 85°C)
Luminous flux:               3,000 K: typ. 98 lm / 5,000 K: typ. 113 lm
Forward voltage typ:       2.9 V

The product portfolio is continually being expanded by additional color temperatures.

More technical data on the product can be found in the product catalog

State-of-the-art technology in use:
The latest developments in chip technology, converters, and package are the secret to the performance optimization of the Oslon SSL. The higher temperature stability of its luminous flux, even when operating under “hot” application conditions, significantly simplifies thermal management. “This efficiency enhancement not only implies a reduction of the initial costs incurred by our customers, it also makes the development of luminaire solutions so much easier,” says Martin Wittmann, responsible marketing manager at Osram Opto Semiconductors.

Particularly small and bright:
The new Osram Oslon SSL LEDs are available in the light color “warm white” (3,000 K), suitable forinterior lighting (type EC), for instance in downlights, as well as in “cold white” (5,000 K), for use in exterior lighting (type PC). As with the previous products of the OSRAM Oslon SSL-range, also the new arrivals are available in the small component size of 3 mm x 3 mm and offer two different lenses. Thanks to the reflectivity of the package, the light that is irradiated to the side or to the back is reflected and can be used again. “Thus, this LED generation, which combines the converter and reflective package, ensures the best possible light color homogeneity over angle,” Martin Wittmann adds.

About Osram Opto Semiconductors:
Osram AG (Munich, Germany) is a wholly-owned subsidiary of Siemens AG and one of the two leading light manufacturers in the world. Its subsidiary, Osram Opto Semiconductors GmbH in Regensburg (Germany), offers its customers solutions based on semiconductor technology for lighting, sensor and visualization applications. OSRAM Opto Semiconductors has production sites in Regensburg (Germany) and Penang (Malaysia). Its headquarters for North America is in Sunnyvale (USA), and for Asia in Hong Kong. Osram Opto Semiconductors also has sales offices throughout the world. For more information, go to www.osram-os.com.

FEATURED

Cree Launches Industry’s First Extreme Density LED

Cree Launches Industry’s First Extreme Density LED Cree announces the new XLamp® XD16 LED, the industry’s first Extreme Density LED, which delivers up to 5½ times higher lumen density than Cree’s previous generation of high power LEDs. The XD16 LED combines breakthrough lumen density, low optical cross-talk, unsurpassed thermal contact and ease of ... Read more »

FEATURED

Lumileds Delivers up to 48% Higher “Punch” than Competitors

Lumileds Delivers up to 48% Higher “Punch” than Competitors Lumileds introduced today the Luxeon CZ Color Line, a product line optimized to deliver maximum punch. “The Luxeon CZ features up to 48% higher punch than any other undomed color LED,” said Jennifer Holland, Product Line Director of the Luxeon Color Family. To meet the recent market trend of color ... Read more »

FEATURED

LIFUD High Bay LED Driver & Smart Sensor

LIFUD High Bay LED Driver & Smart Sensor LIFUD just launched her second generation of high bay driver, LF-FHB series. It can be completely turned OFF even without cutting off the AC power. When the second generation of LF-FHB series works with a smart sensor (= microwave sensor + light sensor) which was developed by LIFUD R&D, the light ... Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel