Products, Materials & Tools | May 05, 2010

Lighting Science Group Launches Breakthrough Line of LED Bulbs - DEFINITY

Lighting Science Group is democratizing LED lighting by offering a new line of LED products with approximately 50 percent more lumens (light output) than competing products, at a dramatically lower retail price.

Americans can now start lowering energy cost without sacrificing light quality by installing Lighting Science Group's new DEFINITY line of LED light bulbs. Built in the USA by American workers, the DEFINITY LED line includes A19, PAR38, PAR30, PAR20, MR16, and G25 bulb types that are all dimmable and will last nearly 20 years.* By way of comparison, Lighting Science Group's DEFINITY LED A19 bulb has a longer life and retails at approximately half the suggested retail price ($20 vs. $40) of GE's recently announced, but not available until later this year, Energy Smart A19 bulb that will be made in China.

"The DEFINITY line sets a new standard for lighting performance at an affordable price," said Zach Gibler, Chief Executive Officer, Lighting Science Group. "Built in the USA, the DEFINITY LED bulbs offer the best lumens per dollar package and can save Americans hundreds of dollars in maintenance, replacement, and energy cost. Furthermore, unlike CFLs, the DEFINITY LED bulbs contain no mercury, are completely recyclable, are instant on, and offer outstanding light quality."

To ensure performance and reliability, the DEFINITY LED line was tested under the rigorous LM-79 process by an independent laboratory approved by the U.S. Department of Energy's CALiPER program. These testing results show that the DEFINITY LED bulbs outperform competing products on the market. Moreover, saving green by buying green has been made easier, since the DEFINITY LED bulbs have a payback of one to two years.

"With the phase-out of incandescent light bulbs, Americans can now purchase long-lasting, environmentally responsible and sustainable replacements that makes economic sense--without sacrificing lighting quality," said Gibler.

The suggested retail price of the DEFINITY line of LED light bulbs ranges from $20 to $55, depending on type, and are being offered through lighting distributors and directly by Lighting Science Group. To find your nearest sales location, go to: http://www.lsgc.com/contact-us/manufacturers-sales-representatives

About Lighting Science:
Lighting Science Group Corporation (LSCG.PK) designs, develops, manufactures and markets LED lighting solutions that are environmentally friendlier and more energy efficient than traditional lighting products. LSG offers retrofit LED lamps in form factors that match the form factor of traditional lamps or bulbs and LED luminaires for a range of applications including public and private infrastructure for both indoor and outdoor applications. LSG's Custom Solutions business unit designs, develops and manufactures custom LED lighting solutions for architectural and artistic projects. LSG is headquartered in Satellite Beach, Florida; LSG's Custom Solutions business unit is based in Rancho Cordova, California; LSG's European operations are based in Goes, The Netherlands; and, LSG has sales offices in Tokyo, Japan, Buckinghamshire, England and Sydney, Australia. LSG has over 200 workers in its Satellite Beach, Florida manufacturing facility that build lighting products from domestic and imported parts. More information about LSG is available at www.lsgc.com.

Add comment

You can add a comment by filling out the form below. Plain text formatting. Comments are moderated.

Question: What is 1 + 5 ?
Your answer:
FEATURED

High Bay LED Driver of Efficiency 95%

High Bay LED Driver of Efficiency 95% LIFUD just launched its 1ST generation of high bay driver, LF-FHBxxxYD/YE, for European market and Asian Pacific market. There’s a 12V cable reserved for connecting the driver to smart modules like sensors, Zigbee modules, DALI modules, etc. This 12V cable makes it flexible to meet various demands ... Read more »

FEATURED

Cree® XLamp® CMT LEDs Deliver up to 45 Percent Higher Lumen Density than Competition

Cree® XLamp® CMT LEDs Deliver up to 45 Percent Higher Lumen Density than Competition The new CMT LEDs extend Cree’s metal-based chip-on-board (COB) LED technology to the most prevalent COB form factors. Cree’s XLamp High Current LED Arrays provide up to 45% more lumen density and up to 17% higher efficacy, and feature an innovative metal substrate technology that delivers higher ... Read more »

FEATURED

BJB Launches Innovative Single-row LED Optic Series for Linear and Area Lighting with Slim Design and Integrated Fixing Elements

BJB Launches Innovative Single-row LED Optic Series for Linear and Area Lighting with Slim Design and Integrated Fixing Elements Optics are a critical part of the lighting system, especially when it comes to efficiency and precision beam control. Even the most efficient light sources would be rendered useless without high-quality optics. They enable the designer to extract light from the source and precisely direct it ... Read more »

FEATURED

Accredited Quality for Colorimetric Quantities

Accredited Quality for Colorimetric Quantities Since 2009 Instrument Systems has received accreditation to DIN EN ISO / IEC 17025 for photometric tests and now offers its certified measurement solutions with the flexible scope of application of Category III. Read more »

FEATURED

Smart Control with GRE’s Dimming Modules

Smart Control with GRE’s Dimming Modules Smart and sustainable technologies have been on the forefront at the international lighting events. With the advance of smart devices and return on investment requirements, the smart building is widely becoming the new standard building model. Read more »

FEATURED

Light is the Efficiency Booster

Light is the Efficiency Booster In order to cut costs while providing high-quality light, many luminaire manufacturers today rely on robust LED components and intelligent control technology from OSRAM. Our future-proof lighting systems reduce the power consumption as well as the maintenance effort. Read more »

FEATURED

A.A.G. Stucchi Presents New IP66/68 Connectors

A.A.G. Stucchi Presents New IP66/68 Connectors A.A.G. Stucchi, an Italian company and leader in the lighting components industry, is ready to present 2 new series of IP66/68 connections: 3800 series of mini connectors and 610 series of distributors. The two product series have their very compact design in common. Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel