Systems & Applications | Special Applications | Displays | LEDs | LED Modules | Aug 23, 2019

Lextar to Releases New Mini LED Product Series

Lextar Electronics Corp.will release a new series of Mini LED ready for mass production, including I-Mini Blue, the smart backlight module integrating mini LED and driver IC, which can realize high contrast and slim design and is already introduced to applications such as gaming laptop panel. At the same time, Lextar will also launch pitch 0.7mm UFP I-Mini RGB display as well as micro LED technology. Applications of the whole series will be presented in Touch Taiwan 2019 held in Nankang Exhibition Center during 28 to 30, August 2019.

The mini LED backlighting series released this time covers wide applications including TV, gaming monitor, laptop, automotive display and VR, demonstrating Lextar's speed in mini LED backlighting application deployment. Following the success of industry-leading mass production of mini LED backlighting, this year Lextar releases integrated I-Mini Blue backlight module, which integrates blue mini LED flip chip and driver IC to achieve high contrast, slim design and competitive cost in panel module assembly. Lextar's I-Mini Blue realizes new local dimming technology of over a thousand zones, which can precisely control the backlight and achieve dynamic contrast ratio of 1,000,000:1. This K-zone backlight solution is perfect for applications such as TV, gaming monitor and laptop. Meanwhile, Lextar will also exhibit AM (active matrix) mini LED backlight module adopting COG (chip on glass) technology. By transferring the blue mini LED chips on TFT glass panel, it is possible to achieve a local dimming of over 2,300 zones on a 2.9" panel. Through this, a small-sized panel can realize a stereopsis with high contrast and is suitable for VR applications.

For mini RGB display, Lextar introduces a lineup of fine pitch RGB display modules. The UFP I-mini RGB module, with an ultra fine pitch of P0.7, featuring high brightness, high contrast, sunlight readability and flexible in display size, is demonstrated in applications including signage, bus stop sign, chartplotter, automotive panel, HUD and tail light.  In addition, Lextar also launches mini RGB LED series, including 1313 & 2121 with a 4-in-1 fine-pitch design, as well as single package of 1010 & 1515.  Customers can select the most appropriate package according to the viewing distance. The product series is expected to mass produced by the end of this year.

In Touch Taiwan 2019, Lextar will also present the latest micro LED display technology, showing a 5.1" AM micro LED display.  By assembling flip chip micro LED on the transparant glass, the brightness can reach up to 30,000 nits. This product not only shows micro LED's anti-strong light capability, but also proves Lextar's leading position in micro LED technology. Lextar's advanced opto-semiconductor components, including VCSEL for 3D sensing, IR LED, wearable application and UV package, are also one of the must-see points in Lextar's showcase.

Lextar stated that the display field has always been the application where Lextar possesses the most competitive advantage.  Through the launch of new series of mini LED backlight and RGB display, Lextar fully demonstrates its mass production capability and will continuously commit to the development of next generation micro LED display technology. In the future, Lextar will devote to the cultivation in 3 major fields including display, automotive and advanced opto-semiconductor to apply the core technology to smart life.

About Lextar Electronics:

Lextar Electronics Corp. (TAIEX: 3698), founded in 2008 in Taiwan, is a subsidiary of AU Optronics, the world-class TFT-LCD and solar PV manufacturer. Lextar specializes in manufacturing opto semiconductor epitaxial, chips, packages, modules and integrated solutions. The range of applications includes LCD backlighting, R/G/B display, automotive lighting, sensing and UV. The company now houses around 3,800 employees and its headquarters is in the Hsinchu Science Park, Taiwan. Lextar has two manufacturing sites in Taiwan, and three in China, which are Chuzhou, Suzhou and Xiamen respectively. Lextar's turnover in 2018: USD 359 million. - www.lextar.com

FEATURED

Epoxy Features Very Low Coefficient of Thermal Expansion

Epoxy Features Very Low Coefficient of Thermal Expansion Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Read more »

FEATURED

New BJB LED Connector for Linear LED Modules: Book 21 Compliant

New BJB LED Connector for Linear LED Modules: Book 21 Compliant Lampholders were standard in older, traditional lighting systems. Modern LED fixtures that utilize non-replaceable LEDs create several assembly and field-replacement disadvantages. Zhaga Book 21 addresses these shortcomings by standardizing linear 'socketable' LED modules. In accordance with Book ... Read more »

FEATURED

EzyLED™ Now Stocked at Digi-Key

EzyLED™ Now Stocked at Digi-Key American Bright, a global LED lighting solutions manufacturer, announced a series of EzyLED 3030. American Bright's EzyLED™ is a proprietary LED device with a built-in IC. This patented design drastically reduces the need for additional circuitry and other on-board components making it the ideal ... Read more »

FEATURED

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED These SMD LEDs are packaged in an industry standard PLCC8 package. These high performance 4 color SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for signage applications. Read more »

FEATURED

Measuring the Oxygen Content of Blood with LEDs

Measuring the Oxygen Content of Blood with LEDs Pulse oximetry is a non-invasive method for determining haemoglobin (Hb) saturation through oxygen in the blood and heart frequency. It uses the fact that oxygen-rich and oxygen-poor haemoglobin absorb red and infrared light differently. In order to measure the oxygen content reliably, LEDs with ... Read more »

EDITORIAL

LpS/TiL 2019 - Europe's Foremost Lighting Conference Discussed Latest Lighting Trends

LpS/TiL 2019 - Europe's Foremost Lighting Conference Discussed Latest Lighting Trends Last week saw the co-hosted LED professional Symposium +Expo (LpS), Trends in Lighting Forum &Show (TiL) and for the first time the Digital Addressable Lighting Interface (DALI) Summit return to Bregenz, Austria. The three international conference and exhibition events were carefully curated to ... Read more »

EDITORIAL

The 2019 LpS & TiL Award Winners: Celebrating the Complete Spectrum of Light

The 2019 LpS & TiL Award Winners: Celebrating the Complete Spectrum of Light It is a great pleasure for the LpS and TiL organization committee to announce the award winners for 2019. For the second time in a row, after the traditional cruise on the lake from Bregenz to Lindau, the gala dinner at the Eilgut Halle has proven to being a great place for the LpS & TiL award ... Read more »

page_peel