LpR Article | Jul 01, 2016

The Influence of LED Emission Characteristics on the Efficiency of Lighting Systems by Osram Opto Semiconductor

In general lighting, efficiency is the main focus. Under specific operation conditions, the main issue appears to be luminous flux. Dr. Roland Schulz, application engineer in the Solid State Lighting division at Osram Opto Semiconductor, takes a deeper look at the influence of LED radiation characteristics.
Add comment

You can add a comment by filling out the form below. Plain text formatting. Comments are moderated.

Question: What is 1 + 3 ?
Your answer:
EDITORIAL

Blue High-Power Laser Diodes from Osram for Show, Point and Line Lasers

Blue High-Power Laser Diodes from Osram for Show, Point and Line Lasers Multi Mode in the InGaN portfolio: The blue multi-mode laser diodes PLPT5 447KA and 450KA from Osram Opto Se- miconductors are available as 1.6 and 2.2 Watt versions with a wavelength of 447 nm. The indium-gallium-nitride diodes are edge emitters, which are built into a hermetically sealed TO ... Read more »

EDITORIAL

UV-C Disinfection Technologies Must be Integrated in EU Renovation Plans

UV-C Disinfection Technologies Must be Integrated in EU Renovation Plans LightingEurope launches an UV-C expert group that promotes the benefits of UV-C disinfection technologies and stimulates market demand and fair market access in Europe. The technology has been proven to deactivate, without exception, all viruses against which it has been tested. LightingEurope is ... Read more »