IP, Reports & Roadmaps | Apr 18, 2007

Led with light transmissive heat sink

An more efficient or higher luminance LED assembly may be formed from a high power LED chip having a first surface, and a second surface, the first surface being mounted to a substrate; the second surface being in intimate thermal contact with a light transmissive heat sink having a thermal conductivity greater than 30 watts per meter-Kelvin. The LED chip is otherwise in electrical contact with at least a first electrical connection and a second electrical connection for powering the LED chip. Providing light transmissive heat sink can double the heat conduction from the LED dies thereby increasing life, or efficiency or luminance or a balance of the three.
Add comment

You can add a comment by filling out the form below. Plain text formatting. Comments are moderated.

Question: What is 1 + 5 ?
Your answer:
FEATURED

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000 K CCT, 85°C, Cree’s new eTone COB ... Read more »

FEATURED

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match Luminus Devices latest, fourth generation chip-on-board LED technology (Gen 4) will open new opportunities in retail lighting and a wide range of indoor and outdoor lighting applications. Luminus Gen 4 COB technology combines significant improvements in efficacy, flux density, high maximum drive ... Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel