Standardization & Regulation | Oct 13, 2006

NIST releases new standard for semiconductor industry

A wide range of optical electronic devices, from laser disk players to traffic lights, may be improved in the future thanks to a small piece of semiconductor, about the size of a button, coated with aluminum, gallium, and arsenic (AlGaAs).

The 1-centimeter square coating, just 3 micrometers thick, is the first standard for the chemical composition of thin-film semiconductor alloys issued by the National Institute of Standards and Technology (NIST). Standard Reference Material (SRM) 2841 was requested by the compound semiconductor industry to help measure and control thin film composition as a basis for optimizing material and device properties. The SRM can be used to calibrate equipment for making or analyzing these materials. Buyers are expected to include companies that grow or characterize thin films or use them to make devices, as well as government and university laboratories.

AlGaAs is used as a barrier material to increase conductivity in high-speed circuits for wireless communication; semiconductor lasers for optical disk drives, bar code scanning, xerography, and laser surgery; and light-emitting diodes for remote controls, traffic lights, and medical instruments. The NIST standard is expected to increase the accuracy of chemical characterization of AlGaAs films by an order of magnitude over the current state of the art. Improved accuracy will reduce wasteful duplication of reference wafers, increase the free exchange of thin-film materials between vendors and their customers, and ultimately improve the accuracy of data on relationships between material composition and properties.

Add comment

You can add a comment by filling out the form below. Plain text formatting. Comments are moderated.

Question: What is 1 + 2 ?
Your answer:
FEATURED

Light Diffusing Polyurethane LED Potting Compound

Light Diffusing Polyurethane LED Potting Compound UR5635 light diffusing polyurethane LED potting compound is a two-part, semi-rigid polyurethane resin which has been formulated to have a light diffusing effect. Its cloudy appearance offers a unique light diffusion effect which has seen UR5635 used to great success as an LED potting compound for ... Read more »

FEATURED

Epoxy Features Very Low Coefficient of Thermal Expansion

Epoxy Features Very Low Coefficient of Thermal Expansion Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Read more »

page_peel