Resources | White Papers | Light Sources | Engineering | Simulation Tools

WHITE PAPER: "Accurate LED Source Modeling Using TracePro"

Modern optical modeling programs allow product design engineers to create, analyze, and optimize LED sources and LED optical systems as a virtual prototype prior to manufacturing the actual product. The precision of these virtual models depends on accurately representing the components that make up the model, including the light source.

This paper discusses the physics behind light source modeling, source modeling options in TracePro, selection of the best modeling method, comparing modeled vs measured results, and source model reporting.

 

Download the White Paper

 

white_paper_lambda

Lambda

FEATURED

Light Diffusing Polyurethane LED Potting Compound

Light Diffusing Polyurethane LED Potting Compound UR5635 light diffusing polyurethane LED potting compound is a two-part, semi-rigid polyurethane resin which has been formulated to have a light diffusing effect. Its cloudy appearance offers a unique light diffusion effect which has seen UR5635 used to great success as an LED potting compound for ... Read more »

FEATURED

Epoxy Features Very Low Coefficient of Thermal Expansion

Epoxy Features Very Low Coefficient of Thermal Expansion Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Read more »

page_peel