Webinars & White Papers — LED professional - LED Lighting Technology, Application Magazine

This paper focuses on integrated LED lamps intended for replacement of general service incandescent lamps. Future white papers are planned to address other LED dimming topics, such as: color change; light output and efficiency (dimming curve); dimming protocols (Internet protocols, 0-10); LED modules with auxiliary drivers; and control architectures that dim without modulated power. Read more »

Solid State Lighting for Incandescent Replacement—Best Practices for Dimming

Comparison of the use phase and production energy consumption for various lighting technologies (Carnegie Mellon LCA). LED lighting at an efficacy of 60 lumens per watt has a comparable overall energy consumption to CFL.2 With higher efficacy LED products,

A typical performance plot of a 120mm size axial fan with curves for both airflow and efficiency

Choosing a Measurement System for LED Sources, Luminaires and Displays

For passive cooling, both, simulation and measurement results demonstrate the advanages of a pin fin design over conventional fins when tilted more than 50°

Sections

Application circuit with the new ILD6070 driver: The current reduction is triggered at a threshold of the solder point temperature of the LED driver IC which is adjustable using an external resistor connected to the Tadj pin

Side Emitting lens and reflector combination initial configuration with large angular output and 62% efficiency.

WEBINAR - INFINEON: "CoolMOS™ CE and LED Driver ICs- The Ideal Combination from LED Tubes to LED Drivers" by Infineon

7d81abc7921e43acbd9a0bb0b06aeed7.jpeg

Screen Shot 2017-10-13 at 14.45.10.jpg

images.png

Unknown.png

82694b7e-5388-4e59-a2ae-276e3445ab26.jpeg

82694b7e-5388-4e59-a2ae-276e3445ab26.jpeg

Unknown.jpeg

600x90.jpg

600x90.jpg

Unknown.png

Arm_IntelligentBuildings_whitepaper-120x80.jpg

7d81abc7921e43acbd9a0bb0b06aeed7.jpeg

Screen Shot 2017-10-13 at 14.45.10.jpg

Luxeon LED as modeled as a surface source using the Tracepro Bridge in SolidWorks

What's_Next_for_Mid-Power_LEDs_in_Lighting_Applications

WEBINAR: "What's Next for Mid-Power LEDs in Lighting Applications" by Philips Lumileds

WEBINAR: "What's Next for Mid-Power LEDs in Lighting Applications" by Philips Lumileds

Solid State Lighting for Incandescent Replacement—Best Practices for Dimming

Solid State Lighting for Incandescent Replacement—Best Practices for Dimming

Comparison of the use phase and production energy consumption for various lighting technologies (Carnegie Mellon LCA). LED lighting at an efficacy of 60 lumens per watt has a comparable overall energy consumption to CFL.2 With higher efficacy LED products,

A typical performance plot of a 120mm size axial fan with curves for both airflow and efficiency

Choosing a Measurement System for LED Sources, Luminaires and Displays

For passive cooling, both, simulation and measurement results demonstrate the advanages of a pin fin design over conventional fins when tilted more than 50°

White Paper - Why Pin Fin LED Coolers Perform Better Under Tilted Position

Figure 2: WPE and LERP Distribution

Unlocking_a_Buildings_IoT_Potential_With_Secure_Smart-Lighting

White-Paper-Measuring-Color-Uniformity

Georg Bechter Licht Introduces CERA 28 - Profound Radiance, Artistic, Handmade, Fragile, with Velvety Light