Skip to content. | Skip to navigation

Personal tools

The Global
Information Hub for
Lighting Technologies
and Design

Sections
Home > Technologies > Intellectual Properties > Catalyst Granted Patent on Switching Architecture for LED Lighting Products
IP, Reports & Roadmaps | Feb 22, 2008

Catalyst Granted Patent on Switching Architecture for LED Lighting Products

Catalyst Semiconductor, Inc. (NASDAQ:CATS) a supplier of analog, mixed-signal and non-volatile memory semiconductors, announced it has received a patent for a unique step-down switching regulator circuit architecture applicable to step-down regulators for driving high brightness LEDs. The patent, titled “LED current bias control using step-down regulator” (patent number 7,323,828), was developed to simplify the design of high brightness LED lighting in emerging household, commercial and automotive lighting applications.

The patent is embedded in the Company’s new line of inductor-based, step-down LED drivers, which bridge the gap between the two traditional choices for LED driver design:  simple-to-use, but power-hungry linear regulators; and switching regulators, which offer lower power dissipation, but are more complex and difficult to implement.  The new patent enables a simpler, smaller, more cost-effective and far more power-efficient “green” LED driver alternative to linear regulators.

“When using this new step-down switching scheme, the designer simply selects a control resistor and the patented switching regulation scheme provides an inherently stable and accurate LED bias across a wide range of voltage operating environments without the complicated equations or calculations associated with alternative LED switching regulators,” stated Anthony Russell, Catalyst’s Power Management Director and co-inventor of the patent.

Traditional switching regulators operate in both Continuous Conduction Mode (CCM) and Discontinuous Conduction Mode (DCM), making them intrinsically complex.  Catalyst’s patented step-down switching regulator architecture operates at the precise intersection between CCM and DCM, the point Catalyst calls Crossover Conduction Mode (XCM), to offer a simpler and more power-efficient solution.  Catalyst’s XCM architecture enables efficient operation over a wide range of high voltage system supplies, versus linear regulators which operate efficiently over a very small supply voltage range.  Additionally, the XCM operation offers unconditional stability and eliminates the need for high-power current sense resistors and associated interface pins, reducing size, complexity and cost.

The first product to incorporate Catalyst’s step-down switching regulator architecture is its CAT4201, a high-efficiency 7W buck LED driver optimized for driving high-brightness, 350mA LEDs at up to 94 percent efficiency. 

About Catalyst Semiconductor:
Headquartered in Santa Clara, California, Catalyst Semiconductor designs and markets analog, mixed-signal and non-volatile memory products, including Digitally Programmable Potentiometers (DPP™), white and color LED drivers, DC/DC converters, LDO regulators, voltage supervisors, bus expanders, serial and parallel EEPROMs, Flash and NVRAM.  Many of Catalyst’s products incorporate the Company’s Quantum Charge Programmable™ technology, to deliver Adaptive Analog™ products, which offer a new level of customer flexibility, lower power and smaller die size.  Catalyst products are used in telecommunications, computer, automotive, industrial and consumer markets. Typical applications include LCD displays, automotive lighting, optical networks, printers, modems, wireless LANs, network cards, DIMM modules, cellular telephones, navigation systems, set-top boxes and Internet routers.  www.catsemi.com.

 
Patent download here .
FEATURED

deLIGHTed Talks: Good Light – Good Life in Wintertime, November 3, 2021

deLIGHTed Talks: Good Light – Good Life in Wintertime,  November 3, 2021 The Good Light Group, together with the Society for Light Treatment and Biological Rhythms (SLTBR), the Daylight Academy (DLA), the International Association of Lighting Designers (IALD), and Luger Research (LR), are organizing and presenting the “Good Light – Good Life” lectures. The webinar ... Read more »

FEATURED

NICHIA Unveils High Radiant Flux Density UV-C LED

NICHIA Unveils High Radiant Flux Density UV-C LED NICHIA, the world’s largest LED manufacturer and inventor of the high-brightness blue and white LED, has launched a high radiant flux density UV-C LED that can help target the inactivation and sterilization of various bacteria and viruses, including the new coronavirus. Read more »

FEATURED

Zhaga Summit: "Sustainable Lighting for Smart Cities and Buildings"

Zhaga Summit: "Sustainable Lighting for Smart Cities and Buildings" Sustainability is a major trend in the lighting industry, driven by regulations and requested by customers and society. The Zhaga Consortium is hosting this online event on 29 September, 15:00 – 18:00 CEST with speakers from national authorities, cities, industry association, lighting design and ... Read more »

FEATURED

Near-field Analysis of VCSEL Arrays

Near-field Analysis of VCSEL Arrays The VTC 4000 is Instrument System‘s VCSEL testing camera for comprehensive near-field analysis of complete VCSEL arrays. It enables the absolutely calibrated, traceable and polarization-controlled 2D characterization of all relevant parameters for every single emitter on the array. The VTC 4000, ... Read more »

page_peel