Skip to content. | Skip to navigation

Personal tools

The Global
Information Hub for
Lighting Technologies
and Design

Sections
Home > Technologies > LEDs & OLEDs > Dynamic In-Car Lighting Scenarios - Osram's Osire E4633i Prototype with Inova's Serial Control Driver
Technologies | LEDs | RGB LEDs | Controls | Driver IC | Oct 09, 2018

Dynamic In-Car Lighting Scenarios - Osram's Osire E4633i Prototype with Inova's Serial Control Driver

The more autonomous a car becomes, the more the way in which it is used will change. As developments continue toward autonomous driving, more and more attention is being focused on the passenger cell. Light will become an integral part of the passenger cell, taking on functional and design-specific tasks. Previously static light, which could only be switched on and off, has now been given a dynamic dimension with the prototype of the Osire E4633i – with countless design options for car manufacturer.

“In the future, the interior of vehicles will be more than simply a cabin for the driver and passengers. It will be an extension of our living space in which we will be able to work and relax”, explained Stephan Pawlik, Marketing Manager Automotive Interior at Osram Opto Semiconductors: “Light sources in car interiors will provide ambient lighting and perform a number of additional functions. For example, they could use dynamic and color effects to draw the driver’s attention back to the traffic in good time.”

To make it easier to provide such new functions in vehicles, Osram has installed a serial control driver from Inova Semiconductors in the new E4633i product from the Osire family in addition to the three color chips (red, blue and green). In the lighting solution it is now possible for a large number of separate LEDs to be controlled via a serial bus system either individually or in groups. This provides simple implementation of uniform color rendering across the entire color space as well as dynamic light cases. Control of the desired color and brightness has been simplified because the E4633i is precalibrated and can automatically correct color shifts in the red range caused by fluctuations in temperature. The LED has an extremely compact pre-mold SMT package with a footprint of 4.6x3.3x0.7 mm. The compact package and the link to the serial bus now allow implementations with more LEDs in a much smaller space.

Since September 2018, Osram Opto Semiconductors is a member of the Iseled Alliance (Integrated Serial/Smart Embedded Light Emitting Diode) and will drive development forward in this field. The prototype of the Osire E4633i will be presented for the first time at electronica 2018 at the Osram booth (booth 155) in Hall B4. The trade fair will take place from November 13 to 16 in Munich.

About Osram:

Osram, based in Munich, is a leading global high-tech company with a history dating back more than 110 years. Primarily focused on semiconductor-based technologies, our products are used in highly diverse applications ranging from virtual reality to autonomous driving and from smartphones to smart and connected lighting solutions in buildings and cities. Osram uses the endless possibilities of light to improve the quality of life for individuals and communities. Osram’s innovations enable people all over the world not only to see better, but also to communicate, travel, work and live better. Osram has approximately 26,400 employees worldwide as of end of fiscal 2017 (September 30) and generated revenue of more than €4.1 billion. The company is listed on the stock exchanges in Frankfurt and Munich (ISIN: DE000LED4000; WKN: LED 400; trading symbol: OSR). Further information can be found at www.osram.com

FEATURED

Continuous versus Discrete Calibration Sources: Consideration for Use

Continuous versus Discrete Calibration Sources: Consideration for Use Rapid advancements in the field of solid-state lighting have presented opportunities for the use of LED-based systems for calibrations typically performed with lamp-based sources. Their highly efficient and long-lived performance, rapid power up, and compact size have made LED-based sources an ... Read more »

FEATURED

LUXTECH Offers First Compelling Flex Modules Designed to Replace Traditional Rigid Modules: LUXroll (UL Listed)

LUXTECH Offers First Compelling Flex Modules Designed to Replace Traditional Rigid Modules:  LUXroll (UL Listed) The Indirect Costs of Using Rigid Boards Make Switching to Flexible LED Modules a Compelling Choice. Read more »

EDITORIAL

New date: Light + Building Autumn Edition 2022

New date: Light + Building Autumn Edition 2022 Frankfurt am Main, January 10, 2022. As the pandemic situation continues to develop very dynamically, Messe Frankfurt is postponing the world's leading trade fair for light and building technology to autumn 2022. Last December, intensive discussions with customers and cooperation partners had ... Read more »

page_peel