Standardization + Regulation | May 24, 2012

JEDEC Publishes First International Thermal Testing Standards for LEDs

JEDEC Solid State Technology Association, the global leader in the development of standards for the microelectronics industry, today announced the publication of a new series of standards for component level testing of high-brightness/power LEDs. Development within JEDEC’s JC-15 Committee involved LED industry leaders, and resulted in the new JESD51-5x series of standards aimed at thermal characterization of power LED components. The series is in compliance with the International Commission on Illumination (CIE)’s existing LED measurement recommendations.

JESD51-50, 51, 52 and 53 are all available for free download via the JEDEC website: http://www.jedec.org/standards-documents/results/jesd51-5.

As the efficiency of power LEDs has improved over time (now in the range of 20-40% depending on the type of LED), the use of high-brightness/power LEDs as a lighting source has become widespread in diverse applications in numerous industries. In these use cases, thermal design is critical in order to ensure expected LED lifetimes and light output, and the design process requires accurate thermal data for LED components. Prior to the publication of the JESD51-5x series, a lack of widely accepted thermal testing standards for power LED components meant that published data sheet information was often questionable. Therefore, development of the new standards was urgently needed.

Both LED manufacturers and LED integrators who assemble LEDs to substrates will benefit from these new standards.  They include clear recommendations for which data to include on LED data sheets, as well as test environments and procedures defined specifically for power LEDs, removing previously existing ambiguity about how thermal performance of an LED package or a metal core printed circuit board (MCPCB) assembled LED device is identified.

John Kelly, JEDEC President, noted, “Clear guidelines for the thermal testing of LEDs were needed, and the publication of JESD51-50, 51, 52 and 53 is the result of quick action by industry leaders and JEDEC’s JC-15 Committee.  JEDEC is pleased to offer manufacturers a comprehensive solution for their testing needs.”

The new standards will be featured in a presentation at the upcoming CORM (Council for Optical Radiation Measurements) 2012 event on May 31st in Ottawa, Canada. Dr. Andras Poppe of Mentor Graphics and Budapest University of Technology and Economics, and a key author of the new standards within JC-15, will speak on the topic of “New JEDEC thermal testing standards for high power LEDs”.

For more information visit: http://cormusa.org/CORM_2012_Program.html.

About JEDEC:
JEDEC is the leading developer of standards for the microelectronics industry.  Over 4,000 participants, appointed by nearly 300 companies, work together in 50 JEDEC committees to meet the needs of every segment of the industry, manufacturers and consumers alike. The publications and standards that they generate are accepted throughout the world. All JEDEC standards are available online, at no charge. For more information, visit www.jedec.org.

FEATURED

Edison Released Brand New DOB III Series Products

Edison Released Brand New DOB III Series Products The DOB III series increased the efficiency, dimming smoothness also provide ultra- low flicker function (flicker 5% and even 5% during dimming). It is compliant to the 2021 European flicker standard IEC TR61547( PstLM) and to CIE TN006 (SVM) on request. It can be applied in many different lighting ... Read more »

EDITORIAL

Würth Elektronik's Power-Saving WL-SMTW: Colors for Feeding Plants

Würth Elektronik's Power-Saving WL-SMTW: Colors for Feeding Plants SMT mountable LEDs in a 2835 package extend Würth Elektronik extensive range of horticulture LEDs. The three WL-SMTW series LEDs emit light of the wavelengths 450 nm (Deep Blue), 660 nm (Hyper Red) and 730 nm (Far Red) – ideal for applications controlling plant growth through specific light ... Read more »

EDITORIAL

Higher-Performance UV-C Solutions from Lumitronix Feature Nichia's New NCSU334B UVC LED

Higher-Performance UV-C Solutions from Lumitronix Feature Nichia's New NCSU334B UVC LED Following the successful introduction of the first UVC LED modules in August 2020, LED expert Lumitronix from Hechingen is expanding the existing concept of linear module solutions with three new, more powerful versions. These are as well mainly addressed to professional customers who are trained ... Read more »

EDITORIAL

Nexperia Launches Industry-First LED Drivers in DFN Package with Side-Wettable Flanks

Nexperia Launches Industry-First LED Drivers in DFN Package with Side-Wettable Flanks Nexperia, the expert in essential semiconductors, today announced a new range of LED drivers in the space-saving DFN2020D-6 (SOT1118D) package. This case style features side-wettable flanks (SWF) which facilitate the use of AOI (automated optical inspection), and improve reliability. This is the ... Read more »