Products, Materials & Tools | Jun 22, 2015

MechaTronix Launches Advanced LED Pin Fin Coolers for Tilted Spot Lights

With the advantage of pin fin LED coolers under tilted position, MechaTronix announces 2 more diameters as standard available. This second generation pin fin coolers is developed for an optimized free air convection under tilted positions of spot and track lights over 45 degrees. Typically under heavy inclined positioning LED coolers need a far more open structure at the side to prevent obstruction of hot raising air.

MechaTronix is keen on developing situation specific LED coolers per LED brand, and offers in this way an optimal performance which exceeds existing cooling platforms with over 30%. As an example they launch now the LPF67 and LPF86 advanced pin fin coolers. In a diameter of 67mm and 86 mm, these advanced LED coolers keep respectively 3500 lumen and 4500 lumen spot and track lights on the required case and junction temperature even under a full horizontal 90 degrees positioning.

The LPF47 and LPF67 advanced LED pin fin coolers are standard foreseen from Zhaga book 3 and Zhaga book 11 mounting holes, as well as an advanced pattern for direct mounting of COB LED modules. Besides better performance under tilted position the weight of these LED pin fin coolers is far lower than extruded star shaped LED coolers with similar performance. The diameter of 86 mm was typically chosen during development to create a 3000 to 4500 lumen passive replacement for tilted active cooled track and spot lights from the past. A few months ago MechaTronix launched a similar diameter 86 mm star shaped LED cooler, the ModuLED Micro, for similar replacement of active cooled spot and down lights under vertical position. Now with this next generation pin fin cooler it seems active cooling is completely banned in spot and down light applications.

For additional information, please visit www.led-heatsink.com or send an email to lulu@mechatronix-asia.com

About MechaTronix Kaohsiung Co, Ltd:
MechaTronix Kaohsiung Co, Ltd was set up in 2007 in Southern Taiwan’s Kaohsiung as a holding with 3 share holders grouping 5 existing mechanical parts manufacturers with the same end market but different production processes.
All of the 5 manufacturing plants where over 10 years in operation and focussed on the overseas OEM market.

FEATURED

BJB Connection Interface for Outdoor LED Modules

BJB Connection Interface for Outdoor LED Modules The model for the future design of human living areas is a "smart city" with intelligent technologies and applications. Smart Cities utilize sensors and controllers in outdoor lighting to conserve resources and enhance human comfort and safety. Read more »

FEATURED

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000K CCT, 85°C, Cree’s new eTone COB ... Read more »

FEATURED

Nanosilica Filled Epoxy with High Abrasion Resistance

Nanosilica Filled Epoxy with High Abrasion Resistance Master Bond EP30NS is a two component epoxy system that cures at room temperature or more rapidly at elevated temperatures. It is optically clear especially in thin sections and can be used as an adhesive, sealant, coating and encapsulation compound. EP30NS offers dimensional stability, linear ... Read more »

FEATURED

WHITE PAPER - How to Overcome the Security Challenges of Smart Lighting

WHITE PAPER - How to Overcome the Security Challenges of Smart Lighting IoT-powered lighting systems are backbones for smart building applications such as energy harvesting, space optimization, and predictive maintenance. Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel