Products, Materials & Tools | Dec 23, 2008

Silicone-Free Interface Material Provides High Thermal Conductivity

MH&W International has introduced Keratherm U 90 thermal interface material for use where contamination concerns prohibit the use of silicone-based thermal pads, but where high levels of thermal conductivity are needed for sufficient thermal transfer in hot electronic devices.

U 90 material consists of a ceramic-filled polyurethane film with thermal conductivity of 6.0 W/mK and thermal impedance of just 0.05 Kin2/W. The material has a high voltage breakdown property of 4.0 kV. It provides strong perforation protection with a tensile strength of 2.5 N/mm2 and a Shore A hardness of 70.

   
Typical applications for silicone-free U 90 thermal interface pads include medical devices, laser equipment, lighting systems, solar energy, disc drives and aerospace electronics.
   
MH&W’s Keratherm U 90 interface material is available in 0.100 and 0.200 mm thicknesses.(3.9 and 7.8 mil). Standard and custom shapes are available in continuous rolls for automated or manual application. Pricing for U 90 thermal interface pads starts at $0.15 for 1 inch square, 0.200 mm thick pads in high volume quantities.
   
U 90 silicone-free thermal interface materials are part of the Keratherm line of thermally conductive interface materials. More information on U 90 pads can be found at www.mhw-thermal.com or by calling 1-201-891-8800 for samples and quotes.
    
About MH&W International Corp:
MH&W International provides innovative, customer-focused thermal management solutions, including Keratherm thermally conductive films, and a wide range of gap fillers, greases, graphite films and insulators.
Add comment

You can add a comment by filling out the form below. Plain text formatting. Comments are moderated.

Question: What is 1 + 5 ?
Your answer:
FEATURED

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs

Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000 K CCT, 85°C, Cree’s new eTone COB ... Read more »

FEATURED

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match

Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match Luminus Devices latest, fourth generation chip-on-board LED technology (Gen 4) will open new opportunities in retail lighting and a wide range of indoor and outdoor lighting applications. Luminus Gen 4 COB technology combines significant improvements in efficacy, flux density, high maximum drive ... Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel