Resources | Certification | EEPCA | Performance | Apr 08, 2014

EEPCA & LightingEurope Announce ENEC+ - The First European Mark That Certifies the Initial Performance of LEDs and Other Luminaires

EEPCA, the European Electrical Products Certification Association, in cooperation with LightingEurope, today announced the launch of ENEC+, the first pan-European mark capable of certifying the initial performance of traditional and LED luminaires. The new performance rating provides the market with certification as to the compliance of LED light fixtures and other luminaires, proving compliance with European safety standards and ensuring the reliability of their stated performance characteristics at the beginning of their life cycle.

The ENEC+ Mark offers decisive benefits and advantages:
•    It is a pan-European certification scheme that covers the initial performance reliability of both LED and other luminaires; it is the alternative to multiple national marks
•    It is based on an evolution model and will evolve towards a scheme that covers the performance of LED luminaires over their stated life time, according to market demand and technology progress, and possibly include other aspects such as eco-design and over time performance
•    It allows full traceability of the products through an online database containing the references and characteristics of all certified products
•    It significantly reduces the costs borne by the manufacturer when answering to calls for tender: no need for repeated testing against varying qualification rules. All initial specification elements are included in the ENEC+ license
•    It provides an objective basis for fair comparison of the initial performance of (LED based) luminaires
•    It covers both LED based and traditional luminaires

EEPCA and LightingEurope jointly started this exercise and continue its development, with the aim to develop a certification scheme that covers the full performance of traditional and LED luminaires. Keeping pace between the ENEC+ scheme and new technological and legislative progress is at the core of the philosophy shared by both associations—as well as seeing the development of the scheme as a permanent work in progress.

ENEC+ has been developed on the basis of the well-known ENEC Mark, which for more than 20 years has established itself as the leading pan-European mark of quality and safety, providing authoritative assurance of compliance with European standards. Today, the ENEC Mark covers some 85,000 products and is recognised by more than 21 European countries.

ENEC+ is complementary to the ENEC Mark: only ENEC-safety certified products are eligible for ENEC+. As a voluntary scheme, it represents a deliberate choice made in favour of the market: professional users of luminaires, whether LED based or not, have a powerful instrument to choose a safe and reliable product and manufacturers have a tool to show their commitment to bringing safe and reliable products to the market.

Valberto Baggio, President of EEPCA, welcomes the new certification scheme: “The launch of ENEC+ demonstrates our ability to respond to the new market expectations. Its evolution model makes it future-proof as it will always remain attuned to the developments in product performance. ENEC+ has all the elements necessary to become largely adopted by manufacturers, as the ENEC Mark has been for the past 20 years.”

LightingEurope President Dietmar Zembrot points out that the “ENEC+ scheme comes at the right time as lighting manufacturers active on the European market now have the possibility to better respond to quality based tenders in the area of professional lighting fixtures in the European market.”

FEATURED

Epoxy Features Very Low Coefficient of Thermal Expansion

Epoxy Features Very Low Coefficient of Thermal Expansion Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses. It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required. Read more »

FEATURED

New BJB LED Connector for Linear LED Modules: Book 21 Compliant

New BJB LED Connector for Linear LED Modules: Book 21 Compliant Lampholders were standard in older, traditional lighting systems. Modern LED fixtures that utilize non-replaceable LEDs create several assembly and field-replacement disadvantages. Zhaga Book 21 addresses these shortcomings by standardizing linear 'socketable' LED modules. In accordance with Book ... Read more »

FEATURED

EzyLED™ Now Stocked at Digi-Key

EzyLED™ Now Stocked at Digi-Key American Bright, a global LED lighting solutions manufacturer, announced a series of EzyLED 3030. American Bright's EzyLED™ is a proprietary LED device with a built-in IC. This patented design drastically reduces the need for additional circuitry and other on-board components making it the ideal ... Read more »

FEATURED

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED

Cree Expands Design Possibilities for Architectural Lighting with the Worldwide Proven CLQ6A LED These SMD LEDs are packaged in an industry standard PLCC8 package. These high performance 4 color SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for signage applications. Read more »

FEATURED

Measuring the Oxygen Content of Blood with LEDs

Measuring the Oxygen Content of Blood with LEDs Pulse oximetry is a non-invasive method for determining haemoglobin (Hb) saturation through oxygen in the blood and heart frequency. It uses the fact that oxygen-rich and oxygen-poor haemoglobin absorb red and infrared light differently. In order to measure the oxygen content reliably, LEDs with ... Read more »

EDITORIAL

LpS/TiL 2019 - Europe's Foremost Lighting Conference Discussed Latest Lighting Trends

LpS/TiL 2019 - Europe's Foremost Lighting Conference Discussed Latest Lighting Trends Last week saw the co-hosted LED professional Symposium +Expo (LpS), Trends in Lighting Forum &Show (TiL) and for the first time the Digital Addressable Lighting Interface (DALI) Summit return to Bregenz, Austria. The three international conference and exhibition events were carefully curated to ... Read more »

EDITORIAL

The 2019 LpS & TiL Award Winners: Celebrating the Complete Spectrum of Light

The 2019 LpS & TiL Award Winners: Celebrating the Complete Spectrum of Light It is a great pleasure for the LpS and TiL organization committee to announce the award winners for 2019. For the second time in a row, after the traditional cruise on the lake from Bregenz to Lindau, the gala dinner at the Eilgut Halle has proven to being a great place for the LpS & TiL award ... Read more »

page_peel