IP, Reports & Roadmaps | Apr 18, 2007

Led with light transmissive heat sink

An more efficient or higher luminance LED assembly may be formed from a high power LED chip having a first surface, and a second surface, the first surface being mounted to a substrate; the second surface being in intimate thermal contact with a light transmissive heat sink having a thermal conductivity greater than 30 watts per meter-Kelvin. The LED chip is otherwise in electrical contact with at least a first electrical connection and a second electrical connection for powering the LED chip. Providing light transmissive heat sink can double the heat conduction from the LED dies thereby increasing life, or efficiency or luminance or a balance of the three.
Add comment

You can add a comment by filling out the form below. Plain text formatting. Comments are moderated.

Question: What is 1 + 5 ?
Your answer:
FEATURED

WHITE PAPER - 4 Key Considerations for Your IoT Strategy

WHITE PAPER - 4 Key Considerations for Your IoT Strategy The digital universe is expected to grow exponentially. Much of this data will be generated by billions of IoT devices. Do you have an IoT strategy that’s ready to take advantage of these data? Download this whitepaper and get details on the 4 key considerations for building a strong IoT foundation. Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel