Most Recent

Business | Distributor News | Osram | Sep 19, 2020

Blue High-Power Laser Diodes from Osram for Show, Point and Line Lasers

Multi Mode in the InGaN portfolio: The blue multi-mode laser diodes PLPT5 447KA and 450KA from Osram Opto Se- miconductors are available as 1.6 and 2.2 Watt versions with a wavelength of 447 nm. The indium-gallium-nitride diodes are edge emitters, which are built into a hermetically sealed TO package. The high-power lasers in the Metal Can® TO56 package are an efficient radiation source and offer a high modulation bandwidth. Read more »

LightingEurope | UV-C | Business News | Sep 19, 2020

UV-C Disinfection Technologies Must be Integrated in EU Renovation Plans

LightingEurope launches an UV-C expert group that promotes the benefits of UV-C disinfection technologies and stimulates market demand and fair market access in Europe. The technology has been proven to deactivate, without exception, all viruses against which it has been tested. LightingEurope is advocating the installation of UV-C disinfection technologies as part of the EU Renovation Wave and the application and enforcement of existing safety rules and standards. Read more »

Kenneth Martin from Zumtobel about Comfortable Lighting

Kenneth Martin has been specifying, qualifying an developing components and characterization setups for LED light sources within the Zumtobel Group since 2006. With his expertise on spectral measurements and applications, he supports integrative lighting solutions topics. He gathered valuable knowledge in physics and optical system engineering while studying at the University of Applied Sciences RV-Weingarten, during the internships at a quality assurance department of a reflector aluminum manufacturer and the optical development department of Zumtobel. He combines his enthusiasm for lighting and sustainable construction engineering with a DIY philosophy. Read more »

SSL | Components | CoB LEDs | UV-LEDs | UV-C | Displays | Sep 11, 2020

Stanley Electric Proves 99.9% Inactivation of SARS-CoV-2 for 265 nm UV-C LED in Mass Production

Stanley Electric Co., Ltd. announced that their recently released 265 nm UV-C LED is in mass production and its effectivity to fight SARS-CoV-2 has been tested in cooperation with the Yamaguchi-University by Dr. Daisuke Hayasaka and Dr. Hiroshi Shimoda. As a result of the conducted evaluation test, Stanley Electric has confirmed high effectiveness of virus inactivation (inability to multiply) of SARS-CoV-2（the virus that causes COVID-19）using their 265 nm UVC LED. Read more »

SSL | Smart Lighting + IoT | Components | Driver Modules | DMX | Sep 11, 2020

eldoLED's New POWERdrive 50W Raises the Bar for DMX Drivers

eldoLED today introduced its 50 W, the industry's ready to use' four-channel DMX driver. This latest addition to the POWERdrive family features DMX interface protection, faster startup times, lower standby power requirements, and a broader range of LED output current. Improved dimming algorithms reduce flicker and artefacts in rolling-shutter image sensors while offering the industry's smoothest fades. This quality of light improvements make the POWERdrive 50W uniquely suited for both architectural and entertainment installations. Read more »

Helvar and Steinel Join Forces for Next Generation DALI-2 Lighting Control Solution

Helvar and Steinel, widely known for innovation, quality and leading lighting control technologies and solutions, announce today their international partnership. The partnership will combine Steinel's expertise in sensing technology with Helvar's expertise in Intelligent Lighting Solutions. Blending the precise, high-quality sensing of Steinel with the intelligent solution capabilities of Helvar will serve benefits such as increasing sustainability by delivering highly efficient buildings, both in terms of optimizing energy as well as space. In addition, creating more intelligent buildings for the benefits of enhancing wellbeing, comfort and productivity to its building occupants. Read more »

SSL | UV | UV Measurement | UV-C | Sep 11, 2020

Gigahertz-Optik UVC Radiometer for Germicidal UV Sources Including 222 nm Excimer Lamps

The new X1-1-UV-3727 radiometer is designed to accurately measure the far-UVC irradiance or dose produced by 222 nm excimer lamps. This is in addition to the measurement of other germicidal UV source types including low pressure Hg lamps and UV LEDs. Each meter has a wide dynamic range and is supplied with a traceable calibration certificate from the ISO-17025 accredited Gigahertz-Optik laboratory. Read more »

Seoul Viosys Violeds Module that Sterilizes 99.9% of Coronavirus in 3 Seconds in Mass Production

Seoul Viosys, a leading compound semiconductor solution provider, announced that it has developed an optimal module designed to sterilize 99.9% of the coronavirus in 3 seconds using "Violeds", a UV LED technology, and started mass production. Along with this, Seoul Viosys is developing a so-called "Photon Shower" product that is applied with this technology to contribute to the safety of medical staff and patients who have been struggling amid COVID-19 pandemic. Read more »

SSL | LEDs | White Mid Power LEDs | Linear Lights | Sep 09, 2020

Lumileds Breakthrough Assures Uniform Dimming Performance from LED to LED

Today, Lumileds introduced the first LED engineered for architectural applications that require uniform light output through the entire dimming range and operating conditions. The new LUXEON 3030 HE Plus Deep Dimming mid-power LED is designed for LED to LED flux uniformity across the entire dimming curve – down to 1% - that is required to achieve consistent visual performance. Read more »

Project Connected Home over IP Connectivity Standard Developing Into Reality

When we set out in December 2019 to create a unifying standard for the smart home industry, there was naturally a lot of excitement — and of course, questions. Would this global consortium truly be able to bring this new standard to market? How long would it take? What products would actually emerge? Would we be able to pull off our promise to unify a fragmented industry under a single connectivity standard that would help companies focus on creating experiences over "plumbing"? Read more »