Most Recent

Rich document Troff document Fulham Introduces Universal Voltage Version of Integrated DirectAC LED Engine and Retrofit Kit
Fulham, a leading supplier of lighting sub-systems and electronics for commercial and specialty applications, today announced the release of universal voltage versions of its DirectAC direct-drive LED units. The DirectAC LED Engines were released earlier this year in a 120 V and with this product release, the same low-profile, self-contained LED engine with integrated driver is now available in a new unit that can support power ratings from 120 to 277 volts.
Rich document Upowertek Announces DALI Compatibility for 50-400W BLD Series LED Driver
DALI (digital addressable lighting interface) protocol is very commonly used for intelligent lighting control according to IEC 62386 from the fluorescent age and many retrofitting projects using LED lights require DALI compatibility. Upowertek recently announced that BLD series support DALI control, and still own all the existing features like NFC programming without having to power on the driver and dim to off with low standby power.
Rich document “UV Power” Research Project Is Working on LED-Replacements for Conventional UV Light Sources
Since February 2017, a total of five research institutes and companies have been working on “UV Power”, a collaborative project funded by the German Federal Ministry of Education and Research (BMBF). The partners have made it their goal to provide high-power UV LEDs to cover a wide variety of applications. These LEDs will eventually replace conventional UV light sources, which often contain toxic mercury, in areas such as production, disinfection, the environment, life sciences and medicine. UV LEDs are also likely to open up new areas of application.
Rich document “UV Power” Research Project Is Working on LED-Replacements for Conventional UV Light Sources
Since February 2017, a total of five research institutes and companies have been working on “UV Power”, a collaborative project funded by the German Federal Ministry of Education and Research (BMBF). The partners have made it their goal to provide high-power UV LEDs to cover a wide variety of applications. These LEDs will eventually replace conventional UV light sources, which often contain toxic mercury, in areas such as production, disinfection, the environment, life sciences and medicine. UV LEDs are also likely to open up new areas of application.
Rich document LED Calibration Standards in the ACS Series
The LED calibration standards in the Instrument Systems ACS series allow you to easily and reliably check the accuracy of photometric devices supplied by Instrument Systems, and recalibrate the photometric value (e.g. averaged luminous intensity, luminous flux or luminance) as necessary.
Rich document Adura LED Solutions Announces Color Tunable LED on Board Modules
Adura LED Solutions, today announced a new line-up of High Power LED on Board (LoB) modules for Indoor and outdoor Lighting that features color tunability and increased design compatibility. The new module 2024C LoB can be driven from 50-250 W using variety of 3535 packed LEDs from Cree, Nichia, Lumileds, Seoul Semiconductors, Samsung and other LED suppliers.
Rich document Troff document Tristimulus Sensor Supports Accurate Measurement of Photobiologically Active Light
ams, a leading worldwide supplier of high performance sensor solutions, today introduced the AS7264N, a tri-stimulus sensor which provides measurements of color that closely match the human eye’s response to the visible light spectrum. The new sensor also accurately measures blue-light wavelengths, which researchers have linked to important health effects such as disruption or management of the circadian rhythm, accelerated eye aging, and eye strain.
Rich document Cree CMA LEDs Provide Best-in-Class Lumen Output and Efficacy
Cree’s new XLamp® CMA High Current LED Arrays provide the industry’s best lumen density and efficacy for metal-based COB LEDs. CMA LEDs deliver up to 2 ½ times the lumen density of Cree’s Standard Density CXA2 LEDs. The new CMA LEDs are compatible with existing CXA2 holders and optics, enabling lighting manufacturers to boost lumen output with minimal redesign. CMA LEDs feature a new innovative metal COB technology that delivers higher reliability than competing metal COBs.
Rich document SoC Technologies in Lighting - Today’s Landscape and Tomorrow's Practices
A system-on-chip (SoC) quite suddenly became an important component in the lighting industry, fueling IoT innovation and opening new opportunities, while at the same time bringing disruption and new challenges. With rapid advancements in wireless communication, the impact of connected technologies on the lighting business will only keep increasing. This means deeper integration with SoCs and more attention from silicon vendors as they start competing for market share in this promising segment. But what is the current state of SoC design from the lighting perspective? Are chipmakers keeping up with the growing expectations for wireless lighting control solutions that are mature and truly reliable? When developing its complete Bluetooth software stack for professional lighting, Silvair worked with a number of different SoCs. Therefore, Piotr Winiarczyk, Wireless Solution Architect, and Szymon Rzadkosz might have found the answers to these questions.
Rich document InterLumi Panama 2018 is Forging Ahead in Full Swing
As one of the most important lighting fairs in Latin America and the Caribbean, InterLumi Panama is forging ahead with its 3rd edition which is going to be held from 11 to 13 July 2018 at ATLAPA Convention Center in Panama.
FEATURED

Cree® XLamp® XHP35.2 HI – Newest Extreme High Power LED

Cree® XLamp® XHP35.2 HI – Newest Extreme High Power LED The XLamp® XHP35.2 HI LED is the newest Extreme High Power LED available in the XP footprint. Built on Cree's latest high power LED technology, the XHP35.2 HI LED features a 12 V configuration for simplified driver design with industry leading candela and lumen density. Optimized for high intensity ... Read more »

FEATURED

LUXTECH Introduces ONECUT: 47” LED Module Cuttable Every ½”

LUXTECH Introduces ONECUT: 47” LED Module Cuttable Every ½” ONECUT is LUXTECH’s most versatile linear/rigid LED module to date; cuttable every ½” between every LED without sacrificing uniformity or performance which means it’s the only linear SKU you’ll need. Standard with poke-in connectors, screw mounting holes, and intermittent solder pads make for ... Read more »

EDITORIAL

Blue High-Power Laser Diodes from Osram for Show, Point and Line Lasers

Blue High-Power Laser Diodes from Osram for Show, Point and Line Lasers Multi Mode in the InGaN portfolio: The blue multi-mode laser diodes PLPT5 447KA and 450KA from Osram Opto Se- miconductors are available as 1.6 and 2.2 Watt versions with a wavelength of 447 nm. The indium-gallium-nitride diodes are edge emitters, which are built into a hermetically sealed TO ... Read more »

EDITORIAL

UV-C Disinfection Technologies Must be Integrated in EU Renovation Plans

UV-C Disinfection Technologies Must be Integrated in EU Renovation Plans LightingEurope launches an UV-C expert group that promotes the benefits of UV-C disinfection technologies and stimulates market demand and fair market access in Europe. The technology has been proven to deactivate, without exception, all viruses against which it has been tested. LightingEurope is ... Read more »

EDITORIAL

Broadband Neutral White LEDs Including Effective UV Component Modelled on the Sun for Rapid Plant Growth

Broadband Neutral White LEDs Including Effective UV Component Modelled on the Sun for Rapid Plant Growth With the plant LEDs GW3535U and GW1919U (COB) euroLighting offers new broadband LEDs with a special spectrum for stimulating plant growth (horticulture lighting). The advantage: the LEDs are not restricted to a specific plant species or growth phase, but can be used universally. Ready-to-use lamps ... Read more »