LFI 2018 | Events | Award | Videos | May 14, 2018

LFI 2018 Award: Crestron's SolarSync Outdoor Sensor

LFI 2018 Award: Crestron's SolarSync Outdoor Sensor Read more »

Resources | White Papers | LightingEurope | Sustainability | Nov 02, 2017

White Paper: Serviceable Luminaires in a Circular Economy from LightingEurope

White Paper: Serviceable Luminaires in a Circular Economy from LightingEurope LightingEurope is proactively exploring the business opportunities that a Circular Economy presents for the lighting industry, as well as the framework conditions required for its successful rollout in the lighting sector. This paper focuses on luminaires, services and design for serviceability and their potential for the lighting industry. Read more »

Resins | White Papers | Optics + Opt. Materials | Resources | Oct 13, 2017

White Paper: Polymeric Systems Bring Clarity to Optical Applications

White Paper: Polymeric Systems Bring Clarity to Optical Applications Some optical assembly applications require optical clarity across a certain wavelength, while others require an opaque coating. Optical grade epoxies, silicones and UV curable coatings provide the versatility to adhere well to a wide variety of substrates and display the critical performance properties required. Learn more about optical transmission, refractive indices, temperature and humidity testing, and more, plus the roles these measurements play in choosing an effective and reliable optical polymer system. Read more »

Resources | White Papers | Test Equipment | Aug 30, 2017

White Paper: FluxGage - A Photometric Test System for LED Luminaires Based on Solar Panels

White Paper: FluxGage - A Photometric Test System for LED Luminaires Based on Solar Panels We present a novel photometric test system for LED luminaires. The new photometric system called „FluxGage“ uses solar panels to detect and measure light. By placing a diffuser and a black pinhole array over a solar panels we achieve a detection surface which is also an absorber. This enables the system to be the same size as the DUT (Device Under Test), as opposed to an integrating sphere which is at least 3 times larger than the DUT. Simulations and experimental results show that this system can measure total flux with an uncertainty of 4.3%. The demonstrated system is used in 2π geometry. The system measures total flux, color parameters (CCT, CRI, chromaticity, etc.) and flicker. Read more »

Resources | White Papers | LEDs | Life-Time | Jun 16, 2017

White Paper: Extending the Life-Time of LEDs

White Paper: Extending the Life-Time of LEDs Choosing the correct protection media for LED devices to improve lifetime and performance. Read more »

Resources | White Papers | Thermal Management | Engineering | Simulation Tools | May 25, 2017

Smartcells - Enabling Fast and Accurate Electronics Thermal Design

Smartcells - Enabling Fast and Accurate Electronics Thermal Design This white paper introduces the concept of SmartCells™ in the context of Computational Fluid Dynamics (CFD) simulation software. They exist in FloTHERM XT™, a CAD enabled electronics cooling simulation tool supplied by Mentor Graphics (Ref 1). This document will explain what they are, how they differ from other meshing approaches employed in the CFD industry, and their benefits to CFD users and electronics thermal designers. Read more »

White Papers | Optics + Opt. Materials | Resources | Apr 21, 2017

White Paper: Shaping LED Diffuser Performance with Polycarbonate Materials

White Paper: Shaping LED Diffuser Performance with Polycarbonate Materials The LED lighting market continues to grow, yet consumers are accustomed to the soft white diffused light from incandescent bulbs. To speed up adoption, manufacturers are utilizing plastic materials containing diffusion additives to offset harsh LED illumination and eliminate hot spots. It’s important to choose the correct diffusion plastic to meet to meet transmission, color and UL requirements. In this paper, we examine how plastic selection, a diffusion package and color help designers achieve the desired look for their application. Read more »

Simulation Tools | Engineering | White Papers | Optics + Opt. Materials | Resources | Mar 15, 2017

White Paper: Predicting Scatter of Light Shaping Diffuser® Angles Using Luminit’s Proprietary Optical Model and OpticStudio

White Paper: Predicting Scatter of Light Shaping Diffuser® Angles Using Luminit’s Proprietary Optical Model and OpticStudio Luminit has developed a proprietary scatter model for users of Zemax. Unlike conventional optical design programs that provide bulk scatter and surface scatter models that “predict” output distribution, Luminit’s proprietary optical model accurately calculates surface effects so users can choose the Light Shaping Diffuser (LSD) angle that offers the most optimized performance. This white paper describes the characteristics of the LSD scatter model and the level of accuracy that can be achieved during this critical stage of the design cycle. Read more »

Archived Webinar

WEBINAR "Faster to Light with Simpler Design: A New Multimode Flyback LED Solution"

WEBINAR "Faster to Light with Simpler Design: A New Multimode Flyback LED Solution" Infineon’s latest Multimode Flyback Controller IC for LED lighting is targeting mid-range to high-end LED drivers for outdoor, interior, office and industrial lighting applications. Its integrated startup cell together with CrCM, DCM and burst mode optimize overall effi­ciency from standby to 100 percent while keeping time to light less than 0.5 seconds and reducing the use of external components. Read more »

OLEDs | White Papers | Optics + Opt. Materials | Resources

Manufacturability of OLED Encapsulation and Light Extraction

Manufacturability of OLED Encapsulation and Light Extraction Applications for OLEDs in lighting are opening unique possibilities for designers; however, the organic materials make OLEDs more fragile than LEDs. A higher-index Luminit Light Shaping Diffuser® developed into a barrier film could be an excellent substrate for OLEDs, encapsulating them while simultaneously supporting them. Read more »

News-Spot | Archived Webinar

Webinar: "Modeling Color Effects in Modern Optical Analysis Software" by Lambda Research

Human Eye Lambda Research Corporation will present a comprehensive webinar on smart designs to model color effects in LED lighting systems using modern optical analysis software. Read more »

Archived Webinar

WEBINAR - INFINEON: "CoolMOS™ CE and LED Driver ICs- The Ideal Combination from LED Tubes to LED Drivers" by Infineon

LED Bulb Application. Infineon, as a well-known system provider, offers the optimal solution for LED Lighting applications starting from LED tubes up to high power LED drivers with the powerful combination of CoolMOS™ CE and the suitable LED Driver ICs. CoolMOS™ CE offers an ideal price/performance value with no compromise on the proven benefits of superjunction technology: it comes with low conduction and switching losses that improve efficiency and ultimately reduce power consumption. CoolMOS™ CE comprises 500V, 600V, 650V and 800V devices targeting LED lighting and further applications like LCD and LED TV. In addition, Infineon has recently launched several new LED Driver ICs suited for various topologies requiring different voltage classes being the perfect match to the broad CoolMOS™ CE portfolio. Read more »

Simulation Tools | Engineering | White Papers | Optics + Opt. Materials | Resources

WHITE PAPER: "LED Reflector and Lens Simulation using TracePro® Illumination Design and Analysis Software"

Complex reflector with 11 LEDs as modeled in TracePro TracePro® allows users to design, analyze, and optimize LED lighting systems using software simulation prior to building hardware. The resultant accuracy of these models depends on the accuracy of the components that make up the model. These include light source characteristics, surface and material properties, and model geometry. Read more »

Resources | White Papers | Thermal Management

WHITE PAPER: "High Intensity UV LED Sources Enabled by Next Generation Substrates"

SEM images of Nanotherm dielectric compared with anodic layers on Al substrate Thermal management of high-power UV LEDs is substantially more demanding than for white LEDs. This arises due to their lower efficacy combined with the end use requirement for intense light sources. Critical to the thermal management of densely packed LED arrays is the substrate the semiconductors are mounted on. This whitepaper investigates how next generation Nanoceramic substrates can benefit the LED industry and presents a case study of a 75W UV LED module, just 2cm². Read more »

Resources | White Papers | Light Sources | Engineering | Simulation Tools

WHITE PAPER: "Accurate LED Source Modeling Using TracePro"

Ray trace example Modern optical modeling programs allow product design engineers to create, analyze, and optimize LED sources and LED optical systems as a virtual prototype prior to manufacturing the actual product. The precision of these virtual models depends on accurately representing the components that make up the model, including the light source. Read more »

FEATURED

Provide UVC Disinfection Total Solution for You - Edison Opto

Provide UVC Disinfection Total Solution for You - Edison Opto In recent years, due to the global outbreak of COVID-19, the people's demand for anti-epidemic and sterilization of anti-virus products has risen, ranging from portable sterilization equipment, home appliances sterilization, and public health sterilization. With the rise of environmental awareness ... Read more »

EDITORIAL

Zhaga and the DALI Alliance Add Sensors and Controllers to Zhaga-D4i Certification

Zhaga and the DALI Alliance Add Sensors and Controllers to Zhaga-D4i Certification The joint Zhaga-D4i certification program from the DALI Alliance and the Zhaga Consortium has already qualified a number of Zhaga-D4i Book 18 outdoor luminaires with Zhaga receptacles and D4i components. Now, certified D4i control devices with Zhaga connectors can also be submitted for Zhaga-D4i ... Read more »