SSL Overview

Integrating Sphere Meets Light Engine: Gamma Scientific Presents New Uniform Tunable LED Light Source

Gamma Scientific has expanded their family of SpectralLED® Tunable LED Light Sources for camera and image sensor calibration. Specifically, the SpectralLED RS-7-2-IS500-2X combines two LED light source engines together with a half meter sphere that includes a 150 mm output port (other sphere and port sizes are available, as well). Read more »

SSL | Components | Drivers | DALI-2 | Jun 17, 2020

Upowertek Released New Generation NFC Programmable DALI-2 LED Drivers

Today Upowertek released new generation BLD and TLD series 40W to 800W NFC programmable DALI-2 LED driver. The new products meet the latest DALI-2 standard whose compatibility was improved a lot when compared with DALI-1 drivers. NFC programming function is also available on this new series, and users could program the output current plus other functions by NFC programmer or smartphone with NFC communication. Read more »

SSL | Tools | Test Equipment | Street Lighting | Jun 15, 2020

GL Optic Presents New Dedicated Imaging Luminance Measurement System for Road Lighting Quality Control

GL Opticam 3.0 4K TEC is an imaging luminance measurement system that has been fully adapted for the reliable evaluation of road lighting according to EN 12301. Street lighting is an extremely important part of our environment. Its quality translates into the comfort of residents and traffic participants and, above all, increases the safety of drivers, passengers and pedestrians. Read more »

Pushing Photons - Metasurface Design Methods Can Make LED Light Act More Like Lasers

UC Santa Barbara researchers continue to push the boundaries of LED design a little further with a new method that could pave the way toward more efficient and versatile LED display and lighting technology: In a paper published in Nature Photonics, UCSB electrical and computer engineering professor Jonathan Schuller and collaborators describe this new approach, which could allow a wide variety of LED devices — from virtual reality headsets to automotive lighting — to become more sophisticated and sleeker at the same time. Read more »

SSL | Components | LED Drivers | Driver IC | Jun 10, 2020

Infineon's New BCR431U LED Driver Allows More Design Freedom for Low Current LED Strips

Infineon Technologies AG releases the BCR431U. The constant current linear LED driver IC provides low-voltage drop performance for regulating LED current. It is the second device released in the new generation BCR family with low voltage drop focusing on low current designs of up to 37 mA. Typical applications for the new BCR431U include LED strips, channel letters, architectural LED lighting, LED displays, as well as emergency, retail, and appliance lighting. Read more »

ZIGEN Presents New 2700K-3000K-4000K TRI-CCT CoB LEDs

ZIGEN Lighting solution co., ltd. announced industry's first TRI-CCT CoB LEDs "ZG6BGXW4W0T" and "ZG6CGDW4Z0T", which can emit at major 3 correlated color temperatures (CCT): 2700 K, 3000 K and 4000 K, are now ready. Thanks to proprietary ZIGEN's patented LED structure, ZIGEN's new CoB LEDs "ZG6BGXW4W0T" and "ZG6CGDW4Z0T" offer some unique features. Read more »

SSL | Components | LED Modules | Linear Modules | Jun 04, 2020

Xicato's Portfolio of Premium Smart Linear LED Lights Now Shipping Worldwide

Xicato, the leading provider of Bluetooth smart building wireless controls and highest quality spot and linear light sources, today announced the general availability of previously announced XFL line of premium linear lights along with 3rd party AC drivers to fulfill orders. The XFL portfolio features 2nd generation linear lighting technology which includes a wide array of accessories to support a variety of job requirements. Read more »

Tools | Test Equipment | UV Measurement | UV-C | Jun 04, 2020

Ultraviolet Germicidal Irradiation: High-Precision UVC Exposure Measurements from Gamma Scientific

Gamma Scientific announces the release of its Germicidal Ultraviolet Irradiation measurements system to perform irradiance and radiant exposure measurements in the UVC region of the spectrum. The system consists of the model 268UVC sensor, which measures 37 mm in diameter with an active area of 11 mm². The sensor, when paired with a Gamma Scientific optical power meter and energy meter, is capable of measuring irradiance levels ranging from 0.05 μW/cm² to 500 mW/cm². Read more »

Displays | Cree | Featured | Jun 03, 2020

Cree's Breakthrough Solution for LED Message Signs

The CV94D family are SMD RGB LEDs designed for the most demanding variable message displays. Manufactured to Cree’s exacting standards of power, longevity, matched sub-pixel brightness and far field optical distribution, these LEDs outperform all existing SMD LED solutions. The CV94D is IPx6/IPx8 spray and water resistant in a 9.4 X 4.2 mm PLCC6 package. Read more »

Measurement | Tools | May 15, 2020

Measuring Uniformity of LED Luminaires in Seconds: MKS Announces Ophir® FluxGage™ 604 Measurement System

MKS Instruments, Inc. (NASDAQ: MKSI) has announced the Ophir® FluxGage™ 604 compact measurement system for LED luminaires. This new series features four additional color sensors evenly arranged in the bottom of the device delivering further x,y, and CCT data as well as the illuminance. Within seconds the user gets an overview of the color and overall uniformity of the measured light. This allows direct evaluation of LED chips or optical assemblies used for color mixing and beam shaping within the design process in order to find the optics that provide the optimal light for a particular application. The system can also be used in end-of-line LED luminaire production applications to instantly detect issues, ensuring high quality product standards are met. The Ophir FluxGage measurement system also measures total luminous flux, color parameters and flicker. Read more »

SSL | Systems + Applications | Luminaires | Tunable White Light | May 07, 2020

Zumtobel Presents CLEAN II: Clean Light You Can Rely On

Some situations demand light in its purest form: when maximum concentration is required. When hygiene and resistance are top priority. When every inch of a room needs to be brightly illuminated. In a hospital, a laboratory, a food production facility. The supreme and industry versions of Zumtobel's CLEAN II take on these special lighting tasks. With their ultra-resistant, discreet design, they focus on what's essential: pure light. tunableWhite technology provides additional support, and perfect white light quality. Read more »

SSL | SSL-Research | Award | Dr. Shuji Nakamura | May 07, 2020

Congratulation, Shuji Nakamura for Another Prestigious Award – The 2020 NAS Award

On April 26, the 2020 National Academy of Science (NAS) Award for the Industrial Application of Science was awarded to Shuji Nakamura, a professor in the department of materials at UC Santa Barbara (UCSB). Read more »

SSL | Systems + Applications | Lamps | MR16 Replacement | May 07, 2020

LUBO Lighting Launches VEGALux High Performance MR16 System Providing Up To 1,500 lm

In its aim to develop high-performance, long-lasting and robust lighting solutions, LUBO Lighting, leading Canadian landscaping and architectural lighting developer and manufacturer, is proud to present its new, state-of-the-art VEGALux system. The new VEGALux MR16 light bulbs are available in three variations: VEGALux 336L, 680L and 1500L. Read more »

Austrian Tech University Graz Revolutionizes 3D Metal Printing Using LEDs

A technology developed at Graz University of Technology uses LED instead of laser sources for the additive manufacturing of metal parts and optimizes 3D metal printing in terms of construction time, metal powder consumption, equipment costs and post-processing effort. Read more »

Tools | Measurement | Test Equipment | Flicker | May 04, 2020

Gigahertz-Optik's BTS256-EF now Offers Enhanced Flicker Frequency Range up to 40 kHz

The BTS256-EF by Gigahertz-Optik GmbH, a well-known measuring device manufacturer, has already been up to that challenge for many years. It offers a wide selection of measuring quantities relevant in general lighting and hence acts as universal measuring device in its field. Now, the device has been updated to record and analyze even higher flicker frequencies than before: It supports signal sampling with up to 40 kHz. Read more »

SSL | Components | LED Modules | Linear Modules | Apr 29, 2020

Xicato's New Premium Smart Linear LED Lights Join Their End-to-End Solutions with Smart Drivers and Controls

Xicato, the leading provider of Bluetooth smart building wireless controls and highest quality light sources, today announced the introduction of XFL, the next generation of smart enabled linear lighting solutions that live up to quality standards the company's LED spot lights have set for the market over the past 12 years. The complete and focused portfolio is designed to support creativity and ease of product selection for lighting designers, specifiers, and customers without the typical pain of searching through endless legacy SKUs often associated with other product portfolios in the market. Read more »

SSL | Systems + Applications | Luminaires | Apr 28, 2020

Tom Dixon and Prolicht Collaboration Leads to a New Lighting Range - CODE

British designer Tom Dixon and leading manufacturer of architectural lighting Prolicht, today announce their collaboration and unveil their new lighting range: CODE. The common ambition was to rethink track lighting and to celebrate the fast-developing world of electronics and LEDs. Their partnership enables a unified proposal for architects and designers: a unique combination of highly technical and decorative lighting in one product. Read more »

SSL | Smart Lighting + IoT | Components | Apr 28, 2020

Douglas Lighting Controls® Introduces New Intelligent Fixture Sensor and Intelligent Fixture Controller

Douglas Lighting Controls®, a member of the Panasonic family of companies, recently introduced the new Intelligent Fixture Sensor (IFS) and Intelligent Fixture Controller (IFC) to its high-performance lighting products portfolio. Specially designed for Luminaire Level Lighting Controls (LLLC), the IFS units can be deployed as independent, fixture-mounted occupancy and daylight sensors. As an alternative, they can be networked with the Dialog® controllers and other devices in the Dialog ecosystem, including wall station switches, load controllers and low voltage ceiling mount sensors, to create a complete Bluetooth® wireless lighting control system. Read more »

Making Office Lighting Smart with HubSense from Osram

Osram presents the HubSense intelligent lighting management system, an easy-to-commission and scalable solution for retrofitting LED office lighting. HubSense is based on standardized "Qualified Bluetooth Mesh" technology and is ideal for upgrading existing lighting systems in small and medium-sized businesses. Existing installations can therefore be updated without new cabling and without the use of a gateway or any other IT equipment. HubSense is also suitable for new installations in single offices, open-plan offices, corridors and conference rooms and offers the flexibility needed to adapt the lighting to changes in room usage. Read more »

Horticulture | Tools | Simulation Tools | Systems + Applications | Apr 23, 2020

LRC Releases New Horticulture Luminaire Calculator

The Lighting Research Center (LRC) at Rensselaer Polytechnic Institute has developed a free, easy-to-use online tool that will assist growers to evaluate the performance, efficiency, and economics of a wide variety of horticultural luminaires, typically used in greenhouses and other controlled agricultural environments. This online tool, called the horticulture luminaire calculator allows growers to accurately compare several luminaires and select the one that will be most effective for their particular application. Read more »

Signify Upgrades Sensor Ready LED Driver Portfolio with New D4i Standard

Signify, the world leader in lighting, has upgraded its portfolio of compact Philips Xitanium Sensor Ready Xtreme LED drivers for outdoor applications with the recently granted D4i certification. This certification program is designed to deliver standardization in the market, drive wider adoption of IoT connectivity in lighting and aid smart city or building projects. It makes it very attractive and easy for customers to switch to connected lighting or install Connect Ready luminaires with D4i certified drivers now, and upgrade to connectivity later. By Q2 2020, Signify will also upgrade the complete non-isolated Philips Xitanium Dimmable Sensor Ready driver portfolio for indoor applications to the new D4i standard, to facilitate the rapid market adoption of energy-saving technologies and drive standardization. Read more »

SSL | Components | Driver Modules | Outdoor Applications | Apr 14, 2020

Upowertek Released High Cost Performance BSD Series

Upowertek has announced a new BSD series constant current LED driver with the power range from 30 to 100 watts. The new series have compact case, great cost performance. Certified by UL class P rated widely, it is mainly applied to built-in usage of shoebox lights, street lights, bay lights, tunnel lights, and floodlights. Read more »

SSL | Components | Driver Modules | Outdoor Applications | Apr 14, 2020

Inventronics Releases Robust IP66/IP67 LED Driver Series for Challenging Power Conditions

Inventronics is pleased to announce the expansion of the new EAM LED driver series that leverages Inventronics latest next generation platform design with special features specifically for markets who face challenging power regulation. The expansion provides models supplying up to 75 W of power in addition to the already existing models supplying up to 150 W of power. The EAM-075SxxxSB/SG series offers industry-leading surge protection and is IP66/IP67 rated for rugged applications. The series also offers design flexibility with an adjustable output current to reduce SKUs and is ultra-compact to fit inside a multitude of luminaires. Read more »

UV-C Radiometer for Disinfection Effectiveness and Safety of UV-C LEDs and Germicidal Lamps

The X1-1-UV-3726 radiometer enables the effectiveness of UV germicidal irradiation (UVGI) to be accurately determined for both low pressure mercury (254nm) germicidal lamps and UV-C LEDs. Additionally, the device has sufficient sensitivity to detect if undesired exposure poses a photobiological safety risk to users. Read more »

SSL | Components | Electronics | Driver Modules | Apr 06, 2020

Upowertek Released Low Inrush Current LED Driver

Recently, Upowertek released 200-400 W low inrush current LED drivers. With the new design, less MCBs (miniature circuit breaker) will be used when doing luminaire installation, which can make field-wiring easier and cost-saving. For driver solution with less than 200 W, an external solution of using Upowertek power pack PMS series to enjoy the ZERO inrush current can be used. Read more »

Environment | SSL | Health + Environment | Research News | Apr 06, 2020

Light Pollution Suppresses Melatonin Production in Perch

Melatonin controls the body clock – high melatonin levels make us feel tired in the evening. However, the hormone also plays an important role in animals' biological rhythms. Artificial light at night – light pollution – can suppress the production of melatonin in fish, even at very low light intensities, a finding established by researchers from IGB. Read more »

SSL | Components | Electromechanics | Connectors | Apr 02, 2020

WAGO's New Lighting Connection Box Promises Unlimited Freedom in LED Light Design

Increasing miniaturization and popular flat LED lights require universal connection options. WAGO's new lighting connection box offers the best solution because it is housed outside the light. This gives lighting manufacturers more design freedom. Additionally, no dirt and dust can get into the light during installation because it no longer has to be opened for the connection. Read more »

SSL | Technologies | Research News | UV | Disinfection | Apr 02, 2020

Seoul Viosys and SETi's Violeds Technology Proves 99.9% Sterilization of Coronavirus (COVID-19) in 30 Seconds

Seoul Viosys and Sensor Electronic Technology, Inc. ("SETi"), leading global innovators of UV LED products and technology, announced that it has been successful in achieving 99.9% sterilization of coronavirus (COVID-19) in 30 seconds. Tests were conducted with the research group of Korea University, Korea's top rank university, by using a compound semiconductor Violeds technology that is being mass-produced. Read more »

SSL | Linear Lights | Systems + Applications | Luminaires | Apr 02, 2020

LumenFocus Presents New Narrow Profile LED Strip Light for many Applications

The ECLN is an efficient, attractive narrow LED strip suitable for many applications, including retail spaces and offices. The ECLN is available in a wide array of lengths and lumen output packages. The housing is made of precision brake-formed cold rolled steel, with three options of finish: Matte White (standard), Matte Black and Metallic Silver. There are seven lengths available – 2', 3', 4', 6', 12', and 16' – each with an array of light output options. Read more »

SSL | Linear Lights | Systems + Applications | Luminaires | Apr 02, 2020

LumenFocus Presents New Efficient LED Wrap Luminaire for many Applications

The EWLN is a highly efficient LED wrap luminaire with many options and configurations. It is suitable for a variety of applications. This luminaire provides comfortable, uniform illumination with a modern aesthetic that fits right at home in classrooms and offices Read more »