General Lighting

LED/SSL & General Lighting

Seoul Viosys Violeds Module that Sterilizes 99.9% of Coronavirus in 3 Seconds in Mass Production

Seoul Viosys, a leading compound semiconductor solution provider, announced that it has developed an optimal module designed to sterilize 99.9% of the coronavirus in 3 seconds using "Violeds", a UV LED technology, and started mass production. Along with this, Seoul Viosys is developing a so-called "Photon Shower" product that is applied with this technology to contribute to the safety of medical staff and patients who have been struggling amid COVID-19 pandemic. Read more »

SSL | LEDs | White Mid Power LEDs | Linear Lights | Sep 09, 2020

Lumileds Breakthrough Assures Uniform Dimming Performance from LED to LED

Today, Lumileds introduced the first LED engineered for architectural applications that require uniform light output through the entire dimming range and operating conditions. The new LUXEON 3030 HE Plus Deep Dimming mid-power LED is designed for LED to LED flux uniformity across the entire dimming curve – down to 1% - that is required to achieve consistent visual performance. Read more »

SSL | Components | Driver IC | Sep 07, 2020

Digital High Power Factor XDP™ Controller for Cost-Effective Flyback LED Drivers

Infineon Technologies AG introduces the XDP™ digital power XDPL8219. The high-performance flyback controller features secondary-side regulation for high-performance and robust LED designs. It provides high power factor and constant voltage output. The device operates in quasi-resonant mode (QRM) to maximize the efficiency and minimize the electromagnetic interference (EMI) over a wide load range. It accommodates active burst mode (ABM) at light load to prevent audible noise while achieving a no-load standby power level below 100 mW. Read more »

SSL | Smart Lighting + IoT | Driver Modules | Controls | Aug 28, 2020

Inventronics Introduces Class I/II, DALI-2 D4i LED Drivers with Zhaga Compliant Form Factor

Inventronics announces the release of a new family of IP20, Class I/II LED driver with DALI-2 D4i certification providing intra-luminaire and health monitoring solutions. The EBS-080SxxxBT2 is a new generation of drivers providing reduced maintenance costs and a streamlined production. They utilize convenient push terminals for a simpler installation and time-savings wireless programming via NFC allowing luminaires to be adjusted safely at any time and easy in-application troubleshooting. They are also equipped with power monitoring so users can measure energy consumption to better evaluate their ROI. Read more »

SSL | Systems + Applications | Luminaires | Indoor Applications | Aug 28, 2020

Amerlux's Cubebits Sets New Bar for Linear Downlights with Extraordinary Design

Amerlux, a leading design-and-manufacture lighting company, announced a groundbreaking set of recessed linear downlights that will re-shape industry views on lighting size. Cubebits brings a whole new definition to the term comfortable lighting by bringing breathtaking visuals to the space below with a single illumination beam. It offers a 1.5" aperture profile in 3-cell, 6-cell, 9-cell or 12-cell units as well as mounting into the Amerlux Linea Pendants and Gruv recessed 1.5 linear profiles. Cubebits is compatible with Grid, GB and wood millwork ceilings. Perfect for all retail, hospitality and commercial environments, the lighting is discreetly designed in a black and white specular finished louver that exudes bold confidence. Read more »

Lextar Releases New I-Mini LED Modules Covering TV and Automotive Applications

Lextar unveils a full series of I-Mini Blue LED backlighting products adopting 3 key technologies including COB, DOB and mini lens array. Products can be applied to TV, monitor, laptop, automotive display and chartplotter; some of which have been mass produced and delivered to customers. This ensures Lextar's leading position in mini LED backlighting market. Read more »

New LUXEON Rubix Color LEDs – High Power, Small Size and Unmatched Flexibility

Today, Lumileds released the very small and very powerful LUXEON Rubix – a new color LED building block – designed to deliver maximum flux at drive currents up to 3A and unmatched design flexibility. With LUXEON Rubix, engineers are freed from the design constraints of pre-configured modules and can create custom arrays with smaller optics supporting smaller size luminaires. Read more »

NICHIA LEDs with Tinted Encapsulation Boost Contrast in Outdoor Video Displays

Building on over 25 years of LED manufacturing expertise dedicated to the video display market, Nichia announces NSSM332B – the newest addition to its surface-mount (SMD) LED portfolio. The NSSM332B is an innovative three-cavity, 2828 package design (dimensions: 2.8x2.8x2.5 mm) with tinted encapsulation to provide enhanced contrast to outdoor screens. The unique design takes full advantage Nichia's latest die and packaging technology, and offers increased brightness and efficacy to complement the high-contrast properties. For an 8 mm pitch display at 7,000 Nit, the NSSM332B has an estimated power dissipation of only 26.6 mW, which is greater than 50% savings in energy, compared to a typical black package. Read more »

UL Helps Advance LED Lighting Innovations

UL, a leading global safety science company, today announced that its lighting laboratory in Carugate, Italy, located in metro Milan, has received accreditation from the Digital Illumination Interface Alliance (DiiA) to be a Digital Addressable Lighting Interface (DALI) protocol test house. As an international standard for a two-way communication system that brings digital technology to lighting, DALI defines the commands that LED drivers and ballasts need to recognize in order to communicate via controllers and computers equipped with appropriate software or building management systems. With the DiiA accreditation, UL now has the ability to test control gears and devices, such as push-buttons and occupancy and light sensors, against the DALI standard. Read more »

Ledvance's New Portfolio Provides Smart Lighting for a Better Living Experience

An increasing number of customers are looking to integrate smart home functions in their residential area. With Professional Smart for Residential and the new Ledvance PARATHOM® portfolio, Ledvance supports professional users such as installers to achieve the full potential of connected lighting for their customers. The new Ledvance PARATHOM® portfolio for residential and garden areas can be controlled optionally by voice command or app and offers a suitable solution for a wide range of requirements. The portfolio impresses with a combination of quality, innovation, reliability and user-friendliness and is complemented by easy installation, good value for money and features such as color and color temperature change or dimming capabilities. Read more »

SSL | Components | UV | UV-C | UV-Modules | Disinfection | Aug 05, 2020

Lumitronix Adds New UV-C LED Modules for Sterilization and Decontamination to Its UV Portfolio

The Swabian LED company Lumitronix has used the current situation to expand its range of products in the UV-C sector. Within a short period of time, three linear module solutions have been developed, which are primarily aimed at professional customers who are trained in the use of UV-C radiation and can ensure hazard-free operation. Read more »

SSL | LEDs | White LEDs | Outdoor Applications | Jul 30, 2020

Industry Leading LUXEON 5050 LED Gets Performance Boost

Streetlights and high-bay fixtures require high flux and efficacy to meet the ever-increasing demands for system efficiency and energy cost reduction for these applications. Today, LUXEON 5050 LEDs received an upgrade in both flux and efficacy. Typical performance is now 675 lm with 172 lm/W in full bin shipments and higher performance is available. Read more »

SSL | LED Drivers | Driver Modules | Outdoor Applications | Jul 24, 2020

Delta Launches New EUCO Arena Sport Series LED Drivers for Reliable, Efficient Arena and Outdoor Lighting

Delta, a global leader in power and thermal management solutions, today announced the launch of EUCO Arena Sport Series LED drivers, which are designed to provide luminaire manufacturer's a versatile solution for many industrial and commercial lighting applications such as high mast lighting, recreational sports lighting, harbors, airports, and parking lot lighting. Built on three independent output channels with a maximum power of 500 W (1500 W total), these drivers have a wide operating temperature range that ensures performance and reliability for the most rugged applications. These drivers offer precise tuning of the drive current and are equipped with dimming circuitry for DALI-2 digital dimming to allow for adjustment of lighting levels from 0.1% to 100%. In addition to the driver architecture and circuit topology, Delta has achieved a very low typical current ripple of ≤1% peak-to-peak. That is important when it comes to televised events, since current ripple can cause LED flicker. Flickering lights affect the quality of sports broadcasts and limit slow motion options. Read more »

SSL | LED Drivers | Driver Modules | Outdoor Applications | Jul 24, 2020

Inventronics Introduces DALI-2 D4i Certified LED Drivers with NFC Wireless Programming, Power Monitoring and IP66/IP67 Rating

Inventronics is proud to introduce a new family of IP66/IP67 LED drivers with DALI-2 D4i certification granted by the Digital Illumination Interface Alliance (DiiA). The EUM-240SxxxBx family leverages Inventronics latest enhanced platform allowing for reduced inventory SKUs, increased design flexibility and a wide input voltage range of 90-305 Vac to assist world-wide applications. The new EUM-240SxxxBx provides OEMs the ability to monitor crucial driver information to reduce maintenance costs, the ability to plug and play controls and streamline production with their wireless NFC programming. They provide constant power at 240 W at a wide input current range from 700-6700 mA. Read more »

SSL | Components | UV | UV LED | Special Applications | Jul 24, 2020

OMC Announces New Ultra-High-Efficiency IR SMA Fibre-Optic Transmitter LED - FDE870HE

OMC, the pioneer in optoelectronics design & manufacture, announces its new FDE870HE industrial fibre optic transmitter LED that can deliver up to four times more launch power into multimode fibre for the same current versus existing transmitter devices. This ultra-efficient transmitter contains a high-performance 870 nm chip and features an array of micro-optic elements that gather and focus the emitted photons, coupling considerably more light into multimode optical fibres and enabling data to be transmitted reliably over greater distances, or for the system to use less power to achieve the same result. Greater long-term reliability of the system is a further benefit due to the vastly enhanced day-1 launch power and much lower drive current requirements. Read more »

SSL | UV | Special Applications | UV curing | Jul 24, 2020

FireJet™ ONE - The ONE Solution for All Your UV Curing Needs

Phoseon Technology introduces the industry's smallest, highest-powered member of their air-cooled product line, the FireJet™ ONE. These premium 20 W/cm² UV LED curing lamps are designed primarily for the inkjet, flexographic and screen printing markets where high power in a compact form factor, is a key requirement. Read more »

SSL | IR | IR-LEDs | Special Applications | Jul 22, 2020

Ushio's Epitex D-Series SWIR LEDs Now Up to Four Times More Powerful

Ushio has commenced production of its latest high-powered short-wavelength infrared (SWIR) LEDs, the Epitex D-Series. Following the prior success of the S-Series, the Epitex D-Series achieves the world's highest output power and efficiency: The high-power versions have ramped up their forward current to 1 A and gain a boost of up to four times the original radiated power output. Read more »

GlacialPower'sNew GP-CVP040N-xxVL Series LED CCV Driver with TRIAC Dimming for Low Voltage Areas

GlacialPower, the power division of the LED technology manufacturer GlacialTech Inc, announces the new GP-CVP040N-xxVL series LED constant voltage driver is suitable for low voltage areas. It is available in 12 V DC and 24 V DC output rated power of 40.8 W. The driver supports TRIAC dimming function, and appropriates for LED strips application in places such as restaurants, jewelry shop, home and theater. Read more »

Precision Test Solution for Blue Light Hazard Evaluation from Gamma Scientific

Gamma Scientific announces the release of its Blue Light Hazard testing system. The system utilizes the RadOMA GS-1220 spectroradiometer coupled with an aperture or integrating sphere depending on customer measurement requirements, offering evaluation and classification of displays and luminaires according to IEC 62471 and IEC/TR 62778. Read more »

SSL | Systems + Applications | LED Drivers | Driver Modules | Jul 10, 2020

Inventronics Introduces Completely New Line of IP66/IP67 LED Drivers

Inventronics has introduced an entirely new series of IP66/IP67 LED drivers leveraging their latest enhanced platform allowing for reduced inventory SKUs and increased design flexibility. The new EUM-Lx family is equipped with even more features providing OEMs the ability to monitor crucial driver information, reduce maintenance costs and streamline production. They also allow OEMs simplify installation by achieving various output current configurations from 700-5600 mA, adapt existing luminaires to different individual requirements and provide extreme design versatility. Read more »

Lumileds Combines Record-breaking Efficiency with Impeccable Light Quality in Proven 3030 LED Package

Lumileds today revealed its complete line of LUXEON 3030 HE LEDs that enable best-in-class fixtures for a wide variety of applications including architectural, office, high-impact retail, and indoor area illumination. "The LUXEON 3030 HE is built to achieve outstanding efficiency and productivity, superior quality of light with 2 and 3 SDCM options, while simplifying design and production of new fixtures," said Mei Yi, Product Marketing Manager of Mid Power Products at Lumileds. "The LUXEON 3030 HE LEDs were engineered for exacting control of forward voltage within 0.1 volt and enable easy driver design and uniform power output." Read more »

SSL | Components | UV | UV-C | Disinfection | Jun 29, 2020

GKT's New UV-C Board Combines LEDIL's "VIOLET" and NICHIA's "NCSU334A"

In these turbulent times, we need reliable disinfection. Large amounts of water or large areas must be disinfected quickly within a few seconds. We offer a new design for this. Based on the new LEDIL "VIOLET" UV-C 12x multibeam lens, we have combined with the also new UV-C LED "NCSU334A" from NICHIA. Read more »

SSL | Systems + Applications | Products, Materials + Tools | Components | Luminaires | UV | UV-C | Jun 26, 2020

Signify Invests to Broaden Its UV-C Lighting Portfolio for Professional Disinfection

Signify, the world leader in lighting, is increasing its UV-C lighting production capacity and expanding its UV-C product portfolio. The company is leveraging more than 35 years of expertise in UV-C lighting to address the growing global need for the disinfection of air, surfaces and objects. Read more »

SSL | Systems + Applications | Luminaires | Jun 24, 2020

Minimalism and Magic - New Members of the Nimbus Q Four Family: Q Four TT, Q Four IN and Q Four Track

The new members of the Nimbus Q Four family of luminaires – Q Four TT, Q Four IN and Q Four Track – display an excellent, almost "magical" lighting effect. Nimbus's core idea with the Q ONE and Q Four ceiling luminaires was to create a lighting kit for high-quality, focused light. The first Q One and Q Four models were launched two years ago. Now three further versions have been added to the Q Four family of luminaires: the tilting and turning Q Four TT spotlight, the Q Four IN for flush mounting on the ceiling and the Q Four Track, which is mounted on a conductor rail. One reason for their excellent light quality is the Bartenbach LFO lens, which focuses light on the surface to be illuminated in a targeted manner. As Dietrich F. Brennenstuhl, CEO of the Nimbus Group, stated: "A light from an invisible source that immediately lends the illuminated object a certain magic. Read more »

SSL | Materials | Electronics | 3D Manufacturing | Jun 24, 2020

New LCP Compound Permits Micro-Components with Delicate Conductor Path Structures

Plastics specialist Ensinger is presenting a new compound for laser direct structuring (LDS): TECACOMP LCP LDS 1049426 black, based on a Liquid Crystal Polymer (LCP), is designed for thin-walled 3D MID components with very fine conductor paths. The innovative material is particularly suitable for high-frequency applications in the fields of industry automation, electronics (consumer, networks) and the automotive sector. Read more »

SSL | Components | Drivers | DALI-2 | Jun 17, 2020

Upowertek Released New Generation NFC Programmable DALI-2 LED Drivers

Today Upowertek released new generation BLD and TLD series 40W to 800W NFC programmable DALI-2 LED driver. The new products meet the latest DALI-2 standard whose compatibility was improved a lot when compared with DALI-1 drivers. NFC programming function is also available on this new series, and users could program the output current plus other functions by NFC programmer or smartphone with NFC communication. Read more »

SSL | Tools | Test Equipment | Street Lighting | Jun 15, 2020

GL Optic Presents New Dedicated Imaging Luminance Measurement System for Road Lighting Quality Control

GL Opticam 3.0 4K TEC is an imaging luminance measurement system that has been fully adapted for the reliable evaluation of road lighting according to EN 12301. Street lighting is an extremely important part of our environment. Its quality translates into the comfort of residents and traffic participants and, above all, increases the safety of drivers, passengers and pedestrians. Read more »

Pushing Photons - Metasurface Design Methods Can Make LED Light Act More Like Lasers

UC Santa Barbara researchers continue to push the boundaries of LED design a little further with a new method that could pave the way toward more efficient and versatile LED display and lighting technology: In a paper published in Nature Photonics, UCSB electrical and computer engineering professor Jonathan Schuller and collaborators describe this new approach, which could allow a wide variety of LED devices — from virtual reality headsets to automotive lighting — to become more sophisticated and sleeker at the same time. Read more »

SSL | Components | LED Drivers | Driver IC | Jun 10, 2020

Infineon's New BCR431U LED Driver Allows More Design Freedom for Low Current LED Strips

Infineon Technologies AG releases the BCR431U. The constant current linear LED driver IC provides low-voltage drop performance for regulating LED current. It is the second device released in the new generation BCR family with low voltage drop focusing on low current designs of up to 37 mA. Typical applications for the new BCR431U include LED strips, channel letters, architectural LED lighting, LED displays, as well as emergency, retail, and appliance lighting. Read more »

ZIGEN Presents New 2700K-3000K-4000K TRI-CCT CoB LEDs

ZIGEN Lighting solution co., ltd. announced industry's first TRI-CCT CoB LEDs "ZG6BGXW4W0T" and "ZG6CGDW4Z0T", which can emit at major 3 correlated color temperatures (CCT): 2700 K, 3000 K and 4000 K, are now ready. Thanks to proprietary ZIGEN's patented LED structure, ZIGEN's new CoB LEDs "ZG6BGXW4W0T" and "ZG6CGDW4Z0T" offer some unique features. Read more »