Components | Electromechanics | Connectors | Apr 02, 2019

TE Connectivity's LUMAWISE Endurance S - New Compact Solution to Zhaga Book 18 Compatibility

TE Connectivity's LUMAWISE Endurance S - New Compact Solution to Zhaga Book 18 Compatibility TE Connectivity (TE), a world leader in connectivity and sensors, has introduced a new compact connectivity solution that matches a new standardized interface between an outdoor LED luminaire and a sensing/communication module that sits on the outside of the luminaire. TE´s LUMAWISE Endurance S connector system consists of a standardized interface connection according Zhaga Book 18 and includes a receptacle to be mounted on the luminary and a base-and dome combination to function as enclosure for the control-electronics. Read more »

Components | Electromechanics | Connectors | Mar 14, 2019

TE Connectivity Introduces ITB Releasable Poke-In Connectors for LED Lighting Applications

TE Connectivity Introduces ITB Releasable Poke-In Connectors for LED Lighting Applications TE Connectivity (TE), a world leader in connectivity and sensors, has unveiled BUCHANAN WireMate ITB (Inverted Thru-Board). These wire-to-board connectors are for use in linear and circular LED modules found in all sorts of commercial and industrial lighting systems. Read more »

Components | Electromechanics | Electronics | EMI Filters | Medical | Special Applications | Dec 10, 2018

TE Connectivity Introduces Corcom MRI LED Lighting Filters

TE Connectivity Introduces Corcom MRI LED Lighting Filters In medical applications very often strict EMI suppression and clean power is required. One especially critical application is Magnetic Resonance Imaging (MRI). Unfortunately standard LED drivers and LED lighting products don't provide sufficient EMI suppression. Even LED lights outside the MRI room may influnce the MRI equipment. Especially designed filters can eliminate this problem. TE Connectivity’s new Corcom MRI LED lighting filters is such a product. Read more »

Components | Electromechanics | Connectors | Outdoor Applications | IP-Protection | Nov 19, 2018

TE Connectivity Introduces LUMAWISE Endurance N Base with Vent

TE Connectivity Introduces LUMAWISE Endurance N Base with Vent TE Connectivity’s (TE) LUMAWISE Endurance N base with vent is ANSI 136.41 compliant for photocontrols and accepts sleeves and covers in varying heights. These components are assembled to provide a total power and signal interface between the photocontrol module and a lighting fixture’s mating receptacle. Read more »

BJB | Optics | Holder | Featured | Nov 13, 2018

A New Fixing Technology for Optics Brings Additional Time Savings in Luminaire Assembly

A New Fixing Technology for Optics Brings Additional Time Savings in Luminaire Assembly Today it is often the fixing technology which decides how efficiently an LED luminaire can be produced. Innovative assembly procedures help in production by simplifying and shortening processes or eliminating them completely. Just a few minutes are often enough to make a manufacturer more competitive. Read more »

Components | Electromechanics | Holder | Jun 05, 2018

TE Connectivity Offers New LED Holders Compatible With Most COB-LEDs

TE Connectivity Offers New LED Holders Compatible With Most COB-LEDs TE Connectivity (TE), a world leader in connectivity and sensors, has added the LUMAWISE Z45 LED Holder to its range of holders for chip-on-board (COB) LEDs. The new second-generation LED holder from TE is made in a high-strength, highly reflective halogen-free flame retardant thermoplastic (PBT). The Z45 LED holder is 5mm smaller in diameter compared to TE’s Z50 holder and uses adhesive for fast and easy assembly of the COB LEDs in the luminaire. Read more »

Components | Electromechanics | Connectors | Connectivity | Sensors | Horticulture | May 08, 2018

TE Connectivity at LFI - The Next Generation of Solutions for Horticultural Lighting

TE Connectivity at LFI - The Next Generation of Solutions for Horticultural Lighting TE Connectivity (TE), a world leader in connectivity and sensors, will demonstrate how it is illuminating the industry with its latest connectivity solutions for horticultural lighting at Lightfair International (LFI) in Chicago, USA from May 8 – 10, 2018. At the TE booth (#2563), visitors can see how the company’s solutions are helping lighting installers and manufacturers grow their business with TE’s latest components for horticultural lighting. Read more »

Components | Electromechanics | Holder | Driver Modules | Development Kits | Feb 16, 2018

TE Connectivity Introduces Development Kit for Lumawise Drive LED Holder Type Z50

TE Connectivity Introduces Development Kit for Lumawise Drive LED Holder Type Z50 TE Connectivity (TE), a world leader in connectivity and sensors, has introduced a development kit for its new Lumawise Drive LED Holder Type Z50, enabling luminaire designers to purchase a single unit for desktop testing, product evaluation and luminaire prototyping. Each kit contains an LED holder, a cable assembly and a thermal interface material. Read more »

Components | Electromechanics | Connectors | Feb 09, 2018

Adels-Contact Introduces LEDtrack – LCS 75 – SMDblank

Adels-Contact Introduces LEDtrack – LCS 75 – SMDblank On 18 March it will be that time again: The world’s leading trade fair for lighting and building technology, Light + Building 2018, with more than 2,600 exhibitors, will open its doors. Along with their well-known solutions, Adels-Contact will present three innovations that impress with their quality and reliable functionality. Read more »

Components | Mechanics | Profiles | Oct 20, 2017

Lumibright Bendable LED Profiles for Curved LED Lighting Applications

Lumibright Bendable LED Profiles for Curved LED Lighting Applications Fitting aluminum LED extrusions to a curved surface was a hassle in the past. Giving you complete freedom to alter the LED extrusion in any way you need, the flexible construction of the LED profiles will definitely fit your tastes and even a demanding customer will be literally delighted with the smart design that meets most demanding lighting designs. Brighten entire living rooms, kitchens or hallways– it couldn’t be easier with the super bright bendable LED aluminium extrusions. Light up your residential/commercial spaces & enjoy pleasant rays, coming out of a subtle, LED aluminium extrusion. Read more »

Components | Electromechanics | Holder | Driver Modules | Sep 14, 2017

TE's Lumawise Drive LED Holder Type Z50 Solves a Common LED Driver Problem

TE's Lumawise Drive LED Holder Type Z50 Solves a Common LED Driver Problem TE Connectivity (TE), a world leader in connectivity and sensors, introduces the Lumawise drive LED Holder Type Z50 for chip-on-board (COB) LEDs. The new Lumawise drive LED Holder Type Z50, used in track and spot lighting, integrates DC/DC driver and the holder into a single package that enables lighting designers to develop compact, better-looking and more cost-effective lighting products. Read more »

Components | Electromechanics | Holder | Sep 14, 2017

LEDiL Introduces Hekla - Proprietary Sockets and Solderless Connectors

LEDiL Introduces Hekla - Proprietary Sockets and Solderless Connectors LEDiL’s new solderless Hekla connectors are made to provide the best possible compatibility and functionality with our products. The innovative design features two Push-in connectors (pre-installed in the connector assembly) that will transform the same socket into a solderless connector; giving you the possibility to decide whether or not to solder the LEDs. Read more »

Featured | Components | Electromechanics | Connectors | Sep 06, 2017

BJB Introduces New SMD Terminal Block for LED Boards

BJB Introduces New SMD Terminal Block for LED Boards SMD terminal blocks are easy to handle and provide a permanently secure connection to LED-board power supply for all kinds of light applications. Their flat design makes a significant contribution to good lighting quality and avoids the formation of undesired shadows. Moreover, the SMD series from BJB also fulfils specific technical requirements dictated by the respective luminaire design. Examples of this include rear-side wiring and the use of stranded conductors. Read more »

Featured | Electromechanics | Tracks | Indoor Applications | Jul 11, 2017

Linear Flat System - Also the Right Choice for Power Tracks

Linear Flat System - Also the Right Choice for Power Tracks Power tracks are very often used in shops and retail outlets in order to implement various lighting scenarios quickly and easily. Different arrangements and individual positioning are always necessary when the presentation of the product range changes. And that happens more than just once a year. Matched with special drivers which fi t on a power track, the Linear Flat System, together with a lampholder and counterholder, forms a complete modular system for linear lighting in current power track systems. In this way, it is possible to construct a lighting system with interchangeable LED modules without any additional luminaire housings. Read more »

Components | Electromechanics | Holder | Driver Modules | May 12, 2017

TE Connectivity Unveils LUMAWISE Drive LED Holder

TE Connectivity Unveils LUMAWISE Drive LED Holder TE Connectivity (TE), a world leader in connectivity and sensors, is unveiling the LUMAWISE Drive LED holder Type Z50 for chip-on-board (COB) LEDs. The new LUMAWISE Drive LED holder Type Z50, used in track and spot lighting, integrates the holder and driver into a single package that offers lighting designers the possibility to develop compact, better-looking and more cost-effective lighting products. Read more »

FEATURED

EzyLED™ Reduces Circuit Driver Complexity

EzyLED™ Reduces Circuit Driver Complexity American Bright, a global LED lighting solutions manufacturer, announced a series of EzyLED 3030. merican Bright's EzyLED™ is a proprietary LED device with a built-in IC. This patented design drastically reduces the need for additional circuitry and other on-board components making it the ideal ... Read more »

FEATURED

On-the-Fly Light Measurement of Modulated LEDs with DSP 200

On-the-Fly Light Measurement of Modulated LEDs with DSP 200 Instrument Systems addresses increasing demands on light measurement technology in the automotive sector: the goniophotometer AMS 5000 combined with the DSP 200 photometer offers a perfect solution for testing modulated LEDs, which today ensure a driving experience under optimum lighting conditions. Read more »

FEATURED

Electrolube Provides Innovative Resin Solution for LED Lens Issue

Electrolube Provides Innovative Resin Solution for LED Lens Issue Electrolube, the global manufacturer of electro-chemicals, has provided an innovative solution for a complex LED assembly issue. The customer, a leading manufacturer of street lighting and high-bay luminaires in India, had been experiencing problems with the attachment of individual lenses to the ... Read more »

FEATURED

Lumileds Introduces Brightest, Most Reliable RGB LED Module

Lumileds Introduces Brightest, Most Reliable RGB LED Module Leading in luminous intensity and reliability, Lumileds' new LUXEON MultiColor Module 0.5 W is the ideal building block for applications demanding consistent, brilliant color. Read more »

EDITORIAL

High Conductive Foils Enabling Large Area Lighting

High Conductive Foils Enabling Large Area Lighting Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP as one of the leading partners for research and development for surface technologies and organic electronics and Sefar AG, a leading manufacturer of precision fabrics from monofilaments, developed a roll-to-roll ... Read more »

page_peel