Red XLamp LEDs Delivers Best-in-Class Horticulture Efficiency
Cree, Inc. announces the next-generation XLamp® XP-E2 Photo Red (660 nm) and Far Red (730 nm) LEDs, delivering breakthrough performance for horticulture applications. The new Red XP-E2 LEDs provide a drop-in upgrade for the previous generation that outperforms competing LEDs by up to 68 percent. These higher-performance horticulture LEDs increase the efficiency of LED luminaires and shorten their payback periods, making it more affordable to grow food under optimized lighting.
Read more »
BJB Connection Interface for Outdoor LED Modules
The model for the future design of human living areas is a "smart city" with intelligent technologies and applications. Smart Cities utilize sensors and controllers in outdoor lighting to conserve resources and enhance human comfort and safety.
Read more »
Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs
Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000K CCT, 85°C, Cree’s new eTone COB LEDs provide the highest efficacy available in the industry compared to competing COB LEDs of the same size and color. The enhanced performance of these new LEDs can radically transform the output, efficacy and size of LED luminaires in applications that need high quality light, including retail, museum, high-end commercial and medical.
Read more »
Nanosilica Filled Epoxy with High Abrasion Resistance
Master Bond EP30NS is a two component epoxy system that cures at room temperature or more rapidly at elevated temperatures. It is optically clear especially in thin sections and can be used as an adhesive, sealant, coating and encapsulation compound. EP30NS offers dimensional stability, linear shrinkage of less than 0.01%, excellent physical strength characteristics and cures rigid. Most significantly, this epoxy system has been independently tested per ASTM D4060-14 for abrasion resistance for 1,000 cycles and exhibited a loss of weight of only 18.3 mg. This value exceeds typical epoxy compositions and demonstrates the compound's ability to withstand exposure to scuffing, gouging, scraping, scratching and wear.
Read more »
Fast Production Test of UV-LEDs
Numerous applications, for example in the medical area or in material testing, are based on precisely specified UV radiation. For UV-B and UV-C emitters, the measurement of their spectrum between 325 nm down to 200 nm is generally only possible with extended measurement times due to their low radiant flux. As such, a condition for fast testing within production is high reliability in conjunction with high optical throughput of all participating system components. Within its well-established CAS-series of premium spectroradiometers over many years, Instrument Systems has developed a novel series-type CAS 140D-157. This new system measures precisely and reliably not only within the visible spectrum, but also in the UV. Coupled with a PTFE-coated integrating sphere, the system permits for fast 24/7 production tests of UV emitters to be run.
Read more »
Smart High-Power LED Driver from Lifud
As a pioneer in the LED industry who dared to break away from conventions and apply non-isolated design to the LED driver for UFO high bay driver, Lifud has done a good job referring to the sales records and customer feedback of the LF-FHBxxxYx series.
Read more »
Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs
Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000 K CCT, 85°C, Cree’s new eTone COB LEDs provide the highest efficacy available in the industry compared to competing COB LEDs of the same size and color. The enhanced performance of these new LEDs can radically transform the output, efficacy and size of LED luminaires in applications that need high quality light, including retail, museum, high-end commercial and medical.
Read more »
Luminus Gen 4 COBs: 70W CMH Spots Finally Meet Their Match
Luminus Devices latest, fourth generation chip-on-board LED technology (Gen 4) will open new opportunities in retail lighting and a wide range of indoor and outdoor lighting applications. Luminus Gen 4 COB technology combines significant improvements in efficacy, flux density, high maximum drive current, and high temperature capability to enable breakthrough changes in form factor for luminaire makers, For example, it is finally possible for a COB to deliver the output and punch of a 70 Watt ceramic metal halide lamp in an identical form factor. Luminus has eliminated the barriers that until now had required LED luminaires with comparable center beam candlepower to be larger than the incumbent CMH technology.
Read more »
A New Fixing Technology for Optics Brings Additional Time Savings in Luminaire Assembly
Today it is often the fixing technology which decides how efficiently an LED luminaire can be produced. Innovative assembly procedures help in production by simplifying and shortening processes or eliminating them completely. Just a few minutes are often enough to make a manufacturer more competitive.
Read more »
Cree Launches Industry’s Highest Efficacy 90 CRI COB LEDs
Cree, Inc. announces the XLamp® eTone™ LEDs, a breakthrough set of chip-on-board (COB) LEDs that delivers beautiful 90 color rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. Delivering up to 155 lumens per watt (LPW) at 3000 K CCT, 85°C, Cree’s new eTone COB LEDs provide the highest efficacy available in the industry compared to competing COB LEDs of the same size and color. The enhanced performance of these new LEDs can radically transform the output, efficacy and size of LED luminaires in applications that need high quality light, including retail, museum, high-end commercial and medical.
Read more »
PerfectWhite: Luminus’ Latest Spectrally Tuned COB
Spectrally tuned sources are the essential components of human-centric lighting and Luminus PerfectWhite is it’s newest source, joining the Sensus and AccuWhite products, that has been purpose-designed and improves upon the light from conventional sources. PerfectWhite™, which closely replicates the visual characteristics of halogen lamps (3000 K) was preferred by lighting designers in testing at both Light + Building and Lightfair. Though the spectrums are a virtual match – Luminus filled the cyan gap – PerfectWhite’s color point is slightly below the black body locus and as a result, there’s no green/yellow tint that is common to halogen. A better halogen has long been a wish of the lighting design community and PerfectWhite delivers without infra-red, without green/yellow tint, and without ultraviolet radiation.
Read more »
DAISY – for Modern Glare Free Office Lighting
Most people want to work in an office where they don’t constantly have to adjust their field of vision to avoid being blinded by glary lighting. So LEDiL is very pleased to bring to the market DAISY, our beautiful linear solution for modern glare-free office lighting. Designed to make offices look stunning while at the same time increasing wellbeing in the workplace, DAISY is the perfect choice for premium class office lighting. With DAISY, conforming to office lighting regulations and standards no longer means having to settle for the big, ugly luminaires of yesteryear.
Read more »
High Volume Laser Diode and VCSEL Testing
Hitherto established measurement technologies for laser diodes – such as dispersive scanning spectrometry and Fourier-transform infrared spectroscopy (FTIR) – can react sensitively to a production environment. High-resolution array spectroradiometers are effective alternatives that offer multiple advantages, also in continuous production.
Laser diodes, and in particular vertical-cavity surface-emitting lasers (VCSELs), have experienced rapid market growth due to new applications and new technological approaches. Examples of this are infrared VCSELs integrated into consumer electronics and direct diode lasers based on VCSEL arrays, replacing conventional laser systems.
Read more »
Luxeon V2, the Best Choice for a 2 mm² High Power LED
Lumileds announced breakthrough high power performance with the new Luxeon V2 LED. With the highest performance in its class for output and efficacy, the emitter easily enables DLC Premium performance at the system level. Luxeon V2 utilizes a 2 x 2 mm Chip Scale Package (CSP) in a 3.5 x 3.5 mm standard package. “Luxeon V2 is designed such that 99% of the light is forward directed, resulting in the industry’s most usable light from a compact source,” said Jennifer Holland, Product Line Director at Lumileds.
Read more »
The 22nd China (Guzhen) International Lighting Fair
China (Guzhen) International Lighting Fair is based in China Lighting Capital- Guzhen Town, where thousands of lighting manufacturers lies and is dubbed as the source of lightings. With the help of local government and UBM, the fair has been successfully held for 21 editions.
Read more »
