Special Applications

Displays | Cree | Featured | Jun 03, 2020
Cree's Breakthrough Solution for LED Message Signs
Cree's Breakthrough Solution for LED Message Signs The CV94D family are SMD RGB LEDs designed for the most demanding variable message displays. Manufactured to Cree’s exacting standards of power, longevity, matched sub-pixel brightness and far field optical distribution, these LEDs outperform all existing SMD LED solutions. The CV94D is IPx6/IPx8 spray and water resistant in a 9.4 X 4.2 mm PLCC6 package. Read more »
UV | Measurement | Featured | May 25, 2020
Precise Measurement of UV Light Sources for Disinfection
Precise Measurement of UV Light Sources for Disinfection UV radiation encompasses a very wide wavelength spectrum between 10 and 400 nm and is subdivided in ISO Standard 21348 into three ranges. The UVC range between 100 and 280nm is currently extremely relevant for air and water disinfection for combating COVID-19. Since the outbreak of the pandemic this has been manifested, among other things, in a sharp increase in the demand for UVC light sources. Read more »
UV-C | UV-LEDs | May 15, 2020
CIE Position Statement on the Use of UV Radiation to Manage the Risk of COVID-19 Transmission
CIE Position Statement on the Use of UV Radiation to Manage the Risk of COVID-19 Transmission The coronavirus disease (COVID-19) pandemic has accelerated the search for environmental controls to contain or mitigate the spread of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) responsible for the disease. SARS-CoV-2 is usually transmitted from person to person by contact with large respiratory droplets, either directly or by touching virus-contaminated surfaces (also denoted as fomites) and subsequently touching the eyes, nose or mouth. Importantly, there is growing evidence of virus transmission via the airborne route as the large respiratory droplets dry out and form droplet nuclei which can remain airborne for several hours. Depending on the nature of the surface and environmental factors, fomites can remain infectious for several days (van Doremalen, 2020). The use of germicidal UV radiation (GUV) is an important environmental intervention which can reduce both contact spread and airborne transmission of infectious agents (like bacteria and viruses). GUV within the UV-C range (200 nm–280 nm), primarily 254 nm, has been used successfully and safely for over 70 years. However, GUV must be knowledgably applied with appropriate attention to dose and safety. Inappropriate GUV application can present human health and safety issues and produce insufficient deactivation of infectious agents. Application in the home is not advisable and GUV should never be used to disinfect the skin, except when clinically justified. Read more »
Research News | Technologies | Special Applications | Manufacturing | 3D Printing | May 04, 2020
Austrian Tech University Graz Revolutionizes 3D Metal Printing Using LEDs
Austrian Tech University Graz Revolutionizes 3D Metal Printing Using LEDs A technology developed at Graz University of Technology uses LED instead of laser sources for the additive manufacturing of metal parts and optimizes 3D metal printing in terms of construction time, metal powder consumption, equipment costs and post-processing effort. Read more »
Components | UV | UV-LEDs | UV-C | Disinfection | May 04, 2020
Effective UV-C LED Solutions for Pathogen Containment, Medical and Biotechnical Applications at euroLighting
Effective UV-C LED Solutions for Pathogen Containment, Medical and Biotechnical Applications at euroLighting Short UV-C light has been proven to kill 99.9 percent of bacteria, viruses and other pathogens. euroLighting offers new product solutions in the form of UV-C LEDs, the effect of which can be used specifically to effectively sterilise air, water and surfaces and greatly reduce the risk of infection. Based on the current virus pandemic and in view of statements by experts that such situations could occur more frequently in the future, solutions are urgently sought to contain the spread of pathogens as quickly and effectively as possible. Read more »
Components | UV | UV-LEDs | UV-Modules | UV-C | Disinfection | May 04, 2020
Lumitronix Provides Solutions for Use of UV-C LED Under Real Conditions
Lumitronix Provides Solutions for Use of UV-C LED Under Real Conditions As an official distributor of Nichia in Europe, the Hechingen-based LED company Lumitronix offers access to the most powerful UVC LED currently on the market. The NCSU334A emits a wavelength of 280 nm in the ultraviolet range and especially in the UV-C band and enables immediate sterilization and cleaning of air, liquids and surfaces. Bacteria, germs and viruses can be reliably killed in this way. This means that the UV LED from the world's largest LED manufacturer can also act as a possible weapon against the novel corona virus. Read more »
Components | UV | UV-LEDs | UV-C | Disinfection | Apr 23, 2020
Luminus Breaks the $0.10 per mW Barrier for UV-C LEDs
Luminus Breaks the $0.10 per mW Barrier for UV-C LEDs Luminus Devices announces the immediate availability of its newest UV-C LED, the XBT-3535, with performance ranging from 50 mW to 80 mW in the 275-285 nm range. With the global need for disinfection and sterilization devices increasing, the price-performance combination of the XBT-3535 will allow companies to quickly bring novel and affordable solutions to market. Read more »
UV | Tools | Measurement | UV Measurement | Test Equipment | Disinfection | Apr 08, 2020
UV-C Radiometer for Disinfection Effectiveness and Safety of UV-C LEDs and Germicidal Lamps
UV-C Radiometer for Disinfection Effectiveness and Safety of UV-C LEDs and Germicidal Lamps The X1-1-UV-3726 radiometer enables the effectiveness of UV germicidal irradiation (UVGI) to be accurately determined for both low pressure mercury (254nm) germicidal lamps and UV-C LEDs. Additionally, the device has sufficient sensitivity to detect if undesired exposure poses a photobiological safety risk to users. Read more »
SSL | Technologies | Research News | UV | Disinfection | Apr 02, 2020
Seoul Viosys and SETi's Violeds Technology Proves 99.9% Sterilization of Coronavirus (COVID-19) in 30 Seconds
Seoul Viosys and SETi's Violeds Technology Proves 99.9% Sterilization of Coronavirus (COVID-19) in 30 Seconds Seoul Viosys and Sensor Electronic Technology, Inc. ("SETi"), leading global innovators of UV LED products and technology, announced that it has been successful in achieving 99.9% sterilization of coronavirus (COVID-19) in 30 seconds. Tests were conducted with the research group of Korea University, Korea's top rank university, by using a compound semiconductor Violeds technology that is being mass-produced. Read more »
Featured | UV | UV-LEDs | UV-C | Disinfection | Curing | Apr 01, 2020
Nichia UV LED Technology Supports Evolving Markets
Nichia UV LED Technology Supports Evolving Markets Nichia, a leading global specialist in LED technology, is now aiming to extend its dominance to the UV market following its impressive showcase at the recent RadTech 2020 conference and exhibition in Orlando, Florida, USA. The company's latest solutions remain ideal for curing applications, but an extended portfolio is of particular benefit, as UV is known to be incredibly effective in killing viruses, bacteria, fungi and protozoa. Read more »
UV | Components | UV LED | UV-LEDs | UV-C | Disinfection | Mar 31, 2020
Specification and Applications for ProLight Opto's Recently Released UV-C LEDs
Specification and Applications for ProLight Opto's Recently Released UV-C LEDs Escalation of the Coronavirus outbreak have led to higher demand for Ultra-Violet C (UV-C) LED around the world. UV-C as a germicidal light source can inactivates microorganisms by destroying nucleic acids and disrupting their DNA with its short wavelength. The effective germicidal wavelength is between 200-290 nm; shorter wavelength is more efficient but is also more damaging to the human body. The major chip manufacturers make 265-285 nm as mainstream wavelength, because it can improve single chip's radiometric power and increase in sterilization efficiency. Read more »
SSL | microLEDs | Displays | Special Applications | Mar 09, 2020
Plessey Extends its Data-Vµ™ microLED Product Family with a Passive Matrix Micro-Display
Plessey Extends its Data-Vµ™ microLED Product Family with a Passive Matrix Micro-Display Plessey, an embedded technologies developer at the forefront of microLED technology for augmented and mixed reality (AR/MR) display applications, has added passive matrix microLED displays to its Data-Vµ product family. Following the successful launch of Plessey's Data-Vµ segmented microLED display products in 2019, the company has now extended the range with the introduction of passive matrix pixelized microLED displays, based on Plessey's proprietary monolithic GaN-on-Silicon technology. Read more »
SSL | Test Equipment | Safety | UV Measurement | UV | Tools | Mar 03, 2020
Instrument Systems: New Products for the Postponed L+B
Instrument Systems: New Products for the Postponed L+B Instruments Systems has been prepared to feature two new respectively optimized solutions for two different tasks at Light + Building which is postponed to September 27th - October 2nd. Instrument Systems has modified its proven TOP 200 telescopic optical probe to satisfy the requirements of the new IEC TR 62778 technical report. Furthermore, Instrument Systems launches traceable calibration UV-LEDs with extremely low measurement uncertainty. Read more »
SSL | OLEDs | Displays | Systems + Applications | Feb 18, 2020
LG's Revolutionary Transparent OLED Touch Signage Display Creates AR Effect
LG's Revolutionary Transparent OLED Touch Signage Display Creates AR Effect The new release from LG updates the popular Transparent OLED display that generated so much excitement during its rollout. With Transparent OLED Touch Signage, LG has made futuristic technology available to businesses today. The LG solution, more commonly called the Transparent OLED Touch, superimposes vividly colored images and text in high definition on whatever stands behind the screen, just as its predecessor does. Its revolutionary new facet, however, is its touchscreen capability. The Transparent OLED Touch stuns in its transparency, touch capability, durability and design. Read more »
SSL | Technologies | microLEDs | Displays | Feb 13, 2020
Compound Photonics and Plessey Create microLED Display Modules from Bonded Wafers
Compound Photonics and Plessey Create microLED Display Modules from Bonded Wafers Compound Photonics US Corporation (CP), a leading provider of compact high-resolution microdisplay solutions for Augmented Reality (AR) and Mixed Reality (MR) applications, and Plessey Semiconductors Ltd. (Plessey), an embedded technologies developer at the forefront of microLED technology for AR and MR display applications, today announced they have produced the first fully addressable microLED display modules resulting from their previously announced strategic partnership to develop and introduce GaN-on-Silicon microLED based microdisplay solutions for AR/MR applications. Read more »
Resources | Commentary | UV | Disinfection | Feb 05, 2020
Selecting the UV LED Wavelength for Purification Applications
Selecting the UV LED Wavelength for Purification Applications Patrick Durand is the Worldwide Technical Director at Future Lighting Solutions (FLS) with over 15 years of experience in the solid state lighting industry. Patrick leads the FLS Technical Marketing teams and FLS laboratory teams located in multiple regions around the world with the objective of providing world-class support to lighting OEMs in developing luminaires with the latest SSL technology from the light source to the complete system incorporating the LED driver, optic, thermal management and intelligent control solutions. Read more »
Resources | LpR Article | Drivers | Automation | Special Applications | Feb 05, 2020
LED Driver for High Power Machine Vision Flash
LED Driver for High Power Machine Vision Flash Automation is nothing new and its demands are rapidly increasing, either in production or inspection. More sensors are used and many are based on direct or reflected light detection. Some work in the visible range and others work in the non-visible spectrum of light. LED lighting has become the standard in most applications as the solid-state light source offers numerous advantages over other lighting technologies. However, the LED lighting system is only as good as the peripheral components and LED drivers are one key element in many applications. Keith Szolusha, LED driver applications manager and Kyle Lawrence, associate applications engineer, identified the challenges for machine vision flash applications and propose a solution example with Analog Devices' LT3932 high speed LED driver. Read more »
Resources | LpR Article | Technologies | UV | Horticulture | Feb 05, 2020
Transparent Material Considerations for UV Optics in Horticultural Lighting Applications
Transparent Material Considerations for UV Optics in Horticultural Lighting Applications Advancements in UV LED technology have begun changing the horticultural lighting landscape. Research is still ongoing to discover the extent of benefits and best practices of using UV light in horticulture. Using optics in tandem with UV LED light systems can help reach performance goals and optimize growing. Although there are several UV- transmitting materials available, not all are equivalent or able to meet the requirements for UV applications. Justine Galbraith, glass engineer, and Sharayah Follett, market development manager at Kopp Glass, Inc. discuss the performance considerations of various UV-transmitting materials and how application challenges are addressed by integrating optical elements. Read more »
Smart Lighting + IoT | SSL | Displays | Components | Electronics | Sensors | Jan 28, 2020
Vishay Launches Integrated RGBC-IR Sensors With I²C Interface in Low Profile Packages
Vishay Launches Integrated RGBC-IR Sensors With I²C Interface in Low Profile Packages Vishay Intertechnology, Inc. broadens its optoelectronics portfolio with new RGBC-IR sensors for applications such as automatic white balancing and color cast correction in digital cameras; automatic LCD backlight adjustment; and active monitoring of LED color output for IoT and smart lighting. The new VEML3328 (top-looking) and VEML3328SL (side-looking) sensors offer better linearity and higher sensitivity compared to previous generation devices, as well as new features including an infrared (IR) channel. Read more »
Components | LEDs | UV LED | UV | Curing | Disinfection | Jan 20, 2020
Lextar Launches New UV LED Series for Sterilization and Curing
Lextar Launches New UV LED Series for Sterilization and Curing UV LED technology is regarded as a more efficient method of treating microorganisms in drinking water. This technology has been valued and included into drinking water treatment standard by NSF International last November for microbial reduction and provides a new test method to certify manufacturer claims. Read more »
Technologies | Micro-LEDs | LED Modules | Displays | Jan 09, 2020
SSC Develops World's First One Pixel Micro LEDs for 4K Resolution TV from 42" to 220"
SSC Develops World's First One Pixel Micro LEDs for 4K Resolution TV from 42" to 220" Seoul Viosys Co., Ltd. (CEO Young Joo Lee) and Seoul Semiconductor Co., Ltd. (CEO Chung Hoon Lee), leading global innovators of LED and UV LED technologies, announced the new concept display, 'Micro Clean LED' at CES 2020, the biggest global consumer electronics and technology show, running from January 7th through January 10th. Read more »
Resources | LpR Article | Special Applications | Artificial Intelligence | Dec 16, 2019
AI & Lighting
AI & Lighting LpR 73 Article, page 62: Recently, Artificial Intelligence has emerged as an evolutionary force in almost every industry, demonstrating its potential to radically change existing processes. In common literature, AI is interchangeably used with Machine Learning for which various tools have already become commonplace. Henri Juslén, D.Sc (tech.), Chief Future Illuminator, Omar Nasir, M.Sc (tech.), Data Scientist, and Javad Nouri, M.Sc, Data Scientist at Helvar Oy Ab discuss AI on the context of the lighting industry where the scope of applications of AI is similarly quite broad, impacting the various stages involved in the lighting life-cycle such as design, installation, commissioning and configuration. Read more »
Resources | Reports | Roadmap | Micro-LEDs | Displays | Oct 04, 2019
Yole Releases Report on MicroLEDs: Satus and Reality Check
Yole Releases Report on MicroLEDs: Satus and Reality Check MicroLEDs are drawing an increasing amount of attention. Startups have raised more than US$800 million to date, including at least US$100 million in 2019. It is estimated Apple has spent in the range of US$1.5 to US$2 billions on the technology over the last five years. Panel makers such as Samsung Display, LG Display, AUO or Innolux have also significantly increased their efforts. Under this dynamic context, Yole Développement (Yole) is continuing its investigations towards microLED technologies and related applications. Read more »
Tools | Measurement | Spectroradiometer | UV Measurement | Special Applications | Sep 17, 2019
New Stray Light Correction Method Enables UV Hazard Measurements with Array Spectroradiometer
New Stray Light Correction Method Enables UV Hazard Measurements with Array Spectroradiometer A new stray light correction method implemented in the BTS2048 UV array spectroradiometer now enables applications previously only possible with double monochromator systems. This novel method was presented at the CIE's 29th quadrennial session. It combines Out-of-Range and In-Band stray light correction techniques, thereby greatly increasing the dynamic range of accurate UV measurements. Read more »
Technologies | Research | Flexible OLEDs | Automotive | Special Applications | Sep 17, 2019
Fraunhofer Shows Modular OLED Light Strips
Fraunhofer Shows Modular OLED Light Strips At the International Symposium on Automotive Lighting 2019 (ISAL) in Darmstadt from September 23 to 25, 2019, the Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP, a provider of research and development services in the field of organic electronics, will present OLED light strips of any length with additional functionalities for the first time at booth no. 37. Read more »
page_peel