Articles & Interviews
LpR Article |
Jul 04, 2016
Practical Results of a Gas Station Refurbishment with LED Luminaires by the Electromagnetica SA Semiconductor Lighting Centre
Perfect lighting at a gas station is very important for competitiveness. But a conventional lighting system is also a costly and energy demanding installation with high maintenance costs. Stelian Matei from the Electromagnetica SA Semiconductor Lighting Centre shows how a well-planned upgrade of conventional lighting to LED lighting lowers energy consumption and maintenance and, therefore, costs.
Read more »
LpR Article |
Jul 04, 2016
Development Process for a Metal-Halide Replacement LED Module by Neonlite International Ltd.
Seen for the first time at this year’s Light + Building, the TECOH® MHx, has provided specifiers and designers with a viable LED metal halide alternative. Talking about the issues surrounding such a development, Fred Bass, Managing Director of Neonlite International Ltd., the brand owner of MEGAMAN, shows how the module series has been developed and highlights its potential for metal halide replacement moving forward.
Read more »
LpR Article |
Jul 04, 2016
LED Market and Development Trends from the Point of View of a Full-Range Trader in Lighting by Everlight
In an interview with LED professional, Ms. Beate Jungwirth, Director of Marketing & Communications and PR at Everlight and Dr. Christopher Keusch, Senior Sales Manager at Everlight, talk about the market and development trends in the area of LEDs. The experts also discuss Everlight’s focus at the LED professional Symposium +Expo 2012 which takes place in Bregenz, Austria from September 25th to 27th.
Read more »
LpR Article |
Jul 04, 2016
LED Market and Development Trends from the Point of View of a Full-Range Trader in Lighting by Everlight
In an interview with LED professional, Ms. Beate Jungwirth, Director of Marketing & Communications and PR at Everlight and Dr. Christopher Keusch, Senior Sales Manager at Everlight, talk about the market and development trends in the area of LEDs. The experts also discuss Everlight’s focus at the LED professional Symposium +Expo 2012 which takes place in Bregenz, Austria from September 25th to 27th.
Read more »
LpR Article |
Jul 04, 2016
Energy Efficiency and Thermal Simulations of a Retrofit LED Light Bulb by the University of Turku
Mika Maaspuro and Aulis Tuominen from the University of Turku investigated the energy efficiency of a LED driver mounted inside a retrofit light. The heat generation of the LEDs and the driver of the light bulb have been simulated and measured. A thermal model for the light bulb has been created and simulated using a Finite-Element-Method (FEM) software. Parameters of the model have been adjusted to match the temperature measurements which have been done with IR-camera and thermocouples.
Read more »
LpR Article |
Jul 04, 2016
Energy Efficiency and Thermal Simulations of a Retrofit LED Light Bulb by the University of Turku
Mika Maaspuro and Aulis Tuominen from the University of Turku investigated the energy efficiency of a LED driver mounted inside a retrofit light. The heat generation of the LEDs and the driver of the light bulb have been simulated and measured. A thermal model for the light bulb has been created and simulated using a Finite-Element-Method (FEM) software. Parameters of the model have been adjusted to match the temperature measurements which have been done with IR-camera and thermocouples.
Read more »
LpR Article |
Jul 04, 2016
Mesopic Photometry - An Accurate System of Road Lighting Evaluation by Surya Roshni Ltd.
For a long time, photopic vision was the basis for all light measurement tasks, but today this approach is challenged. According to several research results, it seems that mesopic vision should be used as a basis to evaluate street lighting applications or other low level lighting applications. Prija Jain from the Executive Design and Development (Photometry & Optics) department of Surya Roshni Ltd. in India gives us an overview on the recent status of the discussion, explains it and shows the resulting consequences.
Read more »
LpR Article |
Jul 04, 2016
Aspects of Light Quality in Solid State Lighting by OSRAM Opto Semiconductors
For ages the quality of light has been one of the biggest topics for luminaire manufacturers. But since the introduction of LEDs in general lighting the definition of light quality has got a new dimension. Pros and cons of LED lighting quality are often very controversial. Alexander Wilm, Application Engineering Manager of OSRAM Opto Semiconductors, presents facts about LED lighting quality that provide a sound basis for discussions.
Read more »
LpR Article |
Jul 04, 2016
Additive Manufacture of Optics Goes Digital by LUXeXceL B.V.
With a new technology for additive manufacturing, optics fabrication has gone digital, making more product innovation and variety affordable by eliminating the expense of molds and tooling, enabling just-in-time manufacturing and bringing a new freedom for optics and lighting designers. Marco de Visser, Business Development Manager at LUXeXceL B.V. gives an update on this technology and its new opportunities.
Read more »
Tech-Talks Bregenz |
Aug 09, 2016
Tech-Talks BREGENZ - Francis Wong, AVP Lighting Business Unit, Lextar
Francis Wong, Associate Vice President Lighting Business Unit at Lextar, visited the LED professional team for a Tech Talk in Bregenz after Light & Building 2016. Siegfried Luger, Arno Grabher-Meyer and Dr. Guenther Sejkora could discuss Lextar's history, current position, future orientation and strategies. Further exciting topics were the ongoing technology developments, the requirements on modern lighting systems, the latest lighting trends from Light & Building and the relevance of OLED and IoT technology for the company.
Read more »
LpR Article | Research |
Aug 09, 2016
Flicker Beyond Perception Limits - A Summary of Lesser Known Research Results
Since the introduction of fluorescent lamps, the lighting industry knows about flicker issues. However, many aspects are still unclear. Especially effects beyond the flicker fusion threshold are mostly ignored, and sometimes even denied. Dr. Walter Werner, CEO of Werner Consulting, gives a summary of research results indicating that further research is needed and that for high quality lighting very likely a much higher PWM modulation frequency is required.
Read more »
Commentary |
Aug 10, 2016
Lifetime and Reliability by Günther Sejkora
Although questions regarding lifetime and reliability of Solid-State-Lighting (SSL) products are essential for customers, knowledge about it is still fragmentary. It was easy to give answers to these questions in the times of conventional lamps (incandescent, fluorescent, high pressure): light output degraded over time and end of life was reached when light output fell below a certain level or when the lamp “burned out”.
Read more »
LpR Article | Technologies |
Aug 11, 2016
Concepts to Overcome Lifetime Issues of LED Drivers
Lighting technology has changed significantly in recent years after a century of little to modest advancements. LED luminaires offer advancement in lower power consumption and expected life. Maggie Nadjmi, EE Product Manager at SL Power Electronics, explains why this new technology will probably not meet the life and reliability expectations if no attention is paid to the drivers and power supplies used to power LEDs. She discusses the main components affecting lifetime and how to eliminate them or design a product to still achieve the desired lifetime.
Read more »
LpR Article | Quality |
Aug 11, 2016
TM-30 or the Quest for New Metrics to Measure Light Color Quality
As the lighting industry’s need for an unambiguous measure of lighting color quality becomes more urgent, the TM-30 test method put forward by the Illumination Engineering Society of America (IES) is one approach that could offer a solution. Arno Grabher-Meyer, Editor in Chief at LED professional gives a quick status overview.
Read more »
LpR Article | Technologies | Medical |
Aug 11, 2016
High-End White Light Sources Fiber Optics Technology for Medical Applications
Often technologies that are too expensive for the mass market at the beginning are already adopted in medical applications. When reaching a certain level of maturity, costs usually become more reasonable and adaptations for the consumer market begins. Holger Laabs, Oliver Mehl and Henning Rehn from Osram GmbH present a light source technology and its prerequisites for fiber optics that could become one of these technologies.
Read more »
LpR Article |
Aug 11, 2016
LED Lamps Recycling Technology for a Circular Economy
While having a long propagated lifetime, LED lighting products, especially lamps, have a foreseeable end of life. And since they contain many valuable elements they practically beg to be recycled. However, like other highly integrated electronics products recycling is not a simple task. Andrea Gassmann, Jörg Zimmermann, Roland Gauß, Rudolf Stauber and Oliver Gutfleisch from the Fraunhofer Project Group Materials Recycling and Resource Strategies IWKS and the Technische Universität Darmstadt Institute for Materials Science respectively, present and discuss a method that could open the way to successful recirculation of precious components and materials.
Read more »
LpR Article | Research |
Aug 11, 2016
Quality and Health Aspects of LED Lamps for the European Residential Lighting Market
Because of shortfalls in regards to consumer information about high quality, energy efficient, substitute products for incandescent lamps, there has been a significant amount of irritation on the side of the consumer. As part of the Intelligent Energy Europe Program of the European Union, Prof. Dr. Georges Zissis from the Paul Sabatier - University Toulouse and his team investigated 370 LED lamps. All relevant parameters of 95 different lamp types from store shelves in 12 European countries were measured and evaluated regarding quality and health issues.
Read more »
Commentary | Interview |
Sep 02, 2016
The Good the Bad and the Ugly
We sit as lighting designers in our offices and look at beautiful pictures of beautiful lighting scenarios in beautiful glossy magazines. We are inspired by possibilities that new lighting technologies can offer us and allow ourselves to dream of the beautiful projects to come.
Read more »
Tech-Talks Bregenz |
Sep 02, 2016
Tech-Talks BREGENZ - Sebastian Huelck, Director Lighting, EBV Elektronik
Solid State Lighting has not only changed the way that light is generated but also how areas or objects are illuminated. It has changed the whole industry and business. Sebastian Huelck, Director of Segment Lighting at EBV Elektronik GmbH & Co. KG, discussed these changes and the new requirements for modern distribution with Siegfried Luger and Dr. Guenther Sejkora. He explained the transition of distributors from pure logistic specialists to one-stop shops and full service providers, and commented on regional differences. He finished off by giving insights into the future projects of the company.
Read more »
LpR Article |
Sep 05, 2016
How to Design with LEDs: Concurrent Engineering Yields Fully Optimized Lighting Systems
LEDs are often viewed as a replacement for other light sources. The right starting point for designing an appropriate replacement is crucial to the result. Brian S. Jasenak, Optical and Process Engineer at Kopp Glass, describes a concurrent engineering approach that optimizes the optics and other system components, and may help to reduce the number of LEDs needed as well as the overall cost of the LED lighting fixture.
Read more »
