Resources | Standardization | Zhaga | LED Modules | Drivers | Mar 17, 2014

Zhaga Aims to Enable Independent Interchangeability of LED Modules and Drivers

Current situation: According to current Zhaga Books, full interchangeability applies only to the complete LED light engine (LLE). It may not be possible to interchange the LED module(s) without also changing the driver, or vice versa. Future situation: Zhaga aims to enable full and independent interchangeability of LED modules and drivers The Zhaga Consortium, which develops specifications for interchangeable LED light engines, has decided that it will also aim to enable LED modules and drivers that are independently interchangeable. This is in addition to Zhaga’s stated aim to enable interchangeability of LED light engines. Read more »

Resources | Standardization | Zhaga | CoB LEDs | LED Modules | Apr 08, 2014

Zhaga Starts Work on New Books

The Zhaga Consortium, which develops specifications for interchangeable LED light engines, has started to write Books 9, 10 and 11 The Zhaga Consortium, a global lighting-industry organization that is enabling interchangeable LED light engines, has started the development of three new interface specifications, known as Books. The new Books are designated numbers 9, 10 and 11. Read more »

Resources | Certification | EEPCA | Performance | Apr 08, 2014

EEPCA & LightingEurope Announce ENEC+ - The First European Mark That Certifies the Initial Performance of LEDs and Other Luminaires

ENEC+ is complementary to the ENEC Mark EEPCA, the European Electrical Products Certification Association, in cooperation with LightingEurope, today announced the launch of ENEC+, the first pan-European mark capable of certifying the initial performance of traditional and LED luminaires. The new performance rating provides the market with certification as to the compliance of LED light fixtures and other luminaires, proving compliance with European safety standards and ensuring the reliability of their stated performance characteristics at the beginning of their life cycle. Read more »

Resources | Standardization | Zhaga | CoB LEDs | Dec 11, 2014

Zhaga Consortium Starts Work on New Specification for COB LED Arrays

Zhaga is now writing a Book on COB LED arrays In response to feedback from a broad range of stakeholders, the Zhaga Consortium, which develops specifications for interchangeable LED light sources, is now working on a new Book that will include Chip-on-Board (COB) LED arrays. The new Zhaga Book will specify a family of six rectangular or square LED modules with different dimensions. Read more »

Resources | Standardization | Zhaga | LED Modules | Jun 03, 2015

Zhaga Consortium Publishes Book 9 Specification

Zhaga's latest specification in Book 9 addresses LED modules of two different dimensions with a ring-shaped light-emitting surface The Zhaga Consortium, a global lighting-industry consortium that is standardizing LED light engines and associated components, has published Book 9 as its latest interface specification. Consumer lighting applications are addressed by this latest LED lighting component specification from Zhaga, which describes small LED modules with a ring-shaped light-emitting surface. Read more »

Resources | Standardization | Zhaga | CoB LEDs | LED Modules | Oct 12, 2015

Zhaga Publishes Book 11 Specification for Small LED Spotlight Modules

Comparison of the Zhaga Book 11 vs. the Zhaga Book 3 module dimensions The Zhaga Consortium has published Book 11, a new specification that describes circular LED modules with a maximum diameter of 35 mm that are suitable for spotlighting and related applications. A Book 11 module requires a separate LED driver. Read more »

Resources | Standardization | Zhaga | Drivers | Dec 09, 2015

Zhaga Book 13 - LED Drivers - for Download, Certified Products Database Improved

Zhaga Book 13 provides precise specifications for the mechanical dimensions of a broad range of LED drivers The Zhaga Consortium has published a new specification for LED drivers that are used in combination with separate LED modules. The introduction of standardized form-factors for LED drivers is expected to bring significant benefits for LED luminaire makers, including enhanced second-sourcing options and the ability to interchange different LED modules and drivers independently. Furthermore, Zhaga has updated its database of certified products and built a new search engine that allows LED luminaire makers and other users to find and compare components. Read more »

Resources | Standardization | ZigBee | Mar 11, 2016

The Connected Lighting Alliance Endorses ZigBee 3.0 for Residential Lighting

The Connected Lighting Alliance Endorses ZigBee 3.0 for Residential Lighting The Connected Lighting Alliance (TCLA) announced today the endorsement of ZigBee 3.0, as the preferred open standard for residential connected lighting applications, simplifying choices for both lighting companies and consumers. Read more »

FEATURED

UniDriver® Universal Input Line Voltage LED Drivers

UniDriver® Universal Input Line Voltage LED Drivers LTF Technology’s UniDriver Series offers the ultimate in flexibility and ease of driver selection for lighting industry OEMs and specifiers. These technologically-advanced LED drivers offer True-Tri-Mode dimming from 100V to 277V (ELV, TRIAC, 0-10V), dimming levels from 100% to 0.1%, compatibility ... Read more »

FEATURED

NICHIA LED Technology Presented at LICHTWOCHE München

NICHIA LED Technology Presented at LICHTWOCHE München LED manufacturer NICHIA, a specialist in highly efficient lighting, Human Centric Lighting and the imitation of natural light, will participate in the Munich Lichtwoche 2021 from 5 to 12 November with a light installation, two presentations and a discussion on the topic of UV-C. The light ... Read more »

page_peel