Thermal Management

Products, Materials + Tools | Jul 22, 2010
Silicone-Free Interface Material Provides High Thermal Conductivity
Silicone-Free Interface Material Provides High Thermal Conductivity MH&W International has introduced Keratherm U 90 thermal interface material for use where contamination concerns prohibit the use of silicone-based thermal pads, but where high levels of thermal conductivity are needed for sufficient thermal transfer in hot electronic devices. Read more »
Products, Materials + Tools | Jul 22, 2010
CeramCool® Optimized for 4W Cooling
CeramCool® Optimized for 4W Cooling The optimized geometry allows operation of a 4W LED at a maximum temperature of 60°C and reduces the temperature at the hot-spot by 6°C resulting in a significant reduction of stress on a critical component. This means the thermal resistance of the Rubalit ceramic assembly for an identical shape is 13% better than aluminum. Read more »
Products, Materials + Tools | Jul 26, 2010
Nuventix Revolutionary Synthetic Jet Coolers Now Available for PAR-38 and MR-16 Bulbs
Nuventix Revolutionary Synthetic Jet Coolers Now Available for PAR-38 and MR-16 Bulbs Nuventix unveiled two new LED cooling modules. These two products, utilizing Nuventix’ SynJet™ technology, provide high reliability, low audible noise and low power consumption cooling technology for two industry standard lighting configurations. Using the SynJet approach allows twice the light output compared to passive LED thermal management designs. Read more »
Products, Materials + Tools | Jul 26, 2010
NUVENTIX UNVEILS REVOLUTIONARY AIR COOLING SYNJET TECHNOLOGY
NUVENTIX UNVEILS REVOLUTIONARY AIR COOLING SYNJET TECHNOLOGY From LEDs 2007, Nuventix today formally introduced its revolutionary fanless air cooling SynJet™ technology. The patented synthetic jet cooling approach solves active thermal management problems in a completely new way, providing the most reliable, effective and flexible cooling solutions for product designers across a variety of industries, including LED lighting, telecommunications and consumer electronics. SynJet high reliability cooling solutions enable new electronic designs by allowing designers to focus on functionality, not thermals. Read more »
Products, Materials + Tools | Jul 27, 2010
ATS Heat Sinks Cool DRAGONstick(R) LED Lighting Strips
ATS Heat Sinks Cool DRAGONstick(R) LED Lighting Strips NORWOOD, Advanced Thermal Solutions, Inc. (ATS), a leading thermal management and mechanical packaging solutions provider, today has introduced three new heat sink solutions, the ATS-486, ATS-503 and ATS-504 for cooling OSRAM's DRAGONstick® LEDs and other linear LED lighting products. Read more »
Products, Materials + Tools | Nov 23, 2010
Industry's First Multidirectional Mini Blower
Industry's First Multidirectional Mini Blower Providing a unique solution for customized air-flow applications, JARO's new JRB2235 series rotates at 8500 RPM's and produces a powerful 1.2 CFM of super-cooled air (with a static pressure of .122" of H2O). Operating voltage is 4.0V to 5.5VDC. The availability of single or dual unit configurations provides customers with the unique ability to select the precise direction(s) of airflow, making this the first multidirectional mini blower in the Thermal Cooling Industry. Read more »
Products, Materials + Tools | Mar 18, 2011
Techsil's Thixo Gel for Electronics
Techsil has launched the RTV3080 thixo gel designed for electronic applications such as engine-control units, power-steering modules and power semiconductors. Read more »
Products, Materials + Tools | Apr 20, 2011
Nuventix Doubles Lumen Output for PAR38 LED Bulbs
Nuventix, Inc., today unveiled a new thermal management reference design, including electronic drive, that simplifies development and significantly improves lumen output of LED bulbs for PAR38 sockets. The Nuventix SynJet cooling engine and heat sink provides lighting designers with a complete system for achieving a more than 2,000 lumen LED array that fits into the AmericanNational Standards Institute (ANSI) PAR38 form factor – more than doubling today’s lumen output for PAR38 LED bulbs. The design features Texas Instruments’ (TI) custom electronic drive control device, which enables a smaller form factor by integrating discrete components into a single integrated circuit (IC). Read more »
Products, Materials + Tools | Jun 24, 2011
Frigodynamics Launches Coolers with Two-Phase Heat Exchanger Designs
Frigodynamics Launches Coolers with Two-Phase Heat Exchanger Designs Frigodynamics has launched a series of coolers that will revolutionise thermal management in the LED market. The two-phase heat exchanger designs allow high levels of power dissipation with zero power consumption. The wide range of coolers we supply ensure we are also able to provide solutions where space constraints exist. Read more »
Products, Materials + Tools | Jul 12, 2011
SinkPAD Corporation Will Introduce Their New Cool Down Aluminum PCB Applications at the LEDshow in Las Vegas
SinkPAD Corporation Will Introduce Their New Cool Down Aluminum PCB Applications at the LEDshow in Las Vegas SinkPAD Corporation’s Vice President of Marketing and Business development Sam Bhayani has announced that his company SinkPAD Corporation will be exhibiting at the LED show in Las Vegas on July 27th. The LED show and conference is on July 26th and 27th, the conference is both days while the expo is on the 27th. The LED show attracts an exclusive group of buyers from every subset of the LED lighting industry. It has a more direct approach to marketing and promoting LED products. The show is designed to encourage manufacturers and their customers to come face to face discussing their LED lighting needs and solutions. The expo is 20,000 feet of interaction between the right companies. Read more »
Products, Materials + Tools | Nov 16, 2011
Shuoen Launches Graphite Heat Sink for MR16 LED Bulb
Shuoen Launches Graphite Heat Sink for MR16 LED Bulb Shuoen, a professional graphite heat sink manufacturer in Taiwan, launches two graphite heat sinks for MR16 LED bulb with model no V304 and V402. These two new innovative LED graphite heat sinks adopted Shuoen’s patented technology of porous graphite manufacturing method. The heat sink using porous graphite provides good heat conductivity and large specific surface area to transmit and dissipate heat away from LED heat source very efficiently, and it is the best solution for high-power LED bulb. Read more »
Products, Materials + Tools | Nov 18, 2011
Jaro's MR-16 Coolers Utilize Aerospace Fluid-Bearing Technology
Jaro's MR-16 Coolers Utilize Aerospace Fluid-Bearing Technology Inspired by expertise from the Aerospace Industry, Jaro's new tightly-designed MR-16 LED coolers optimize longevity and temperature with a highly-efficient fluid-bearing structure. At speeds of up to 4200RPM±15%, these very quiet DC coolers provide a chilly, yet quiet air-flow of 1.850CFM (min.: 1.573 CFM). Specifically designed for LED cooling applications, these coolers are sized at 30mm x30mm x 7mm and operate from -20°C TO +90°C. Read more »
page_peel